Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Arnd Bergmann <arnd@kernel.org>
To:     Hans de Goede <hdegoede@redhat.com>,
        Mark Gross <markgross@kernel.org>,
        "xingtong.wu" <xingtong.wu@siemens.com>
Cc:     Arnd Bergmann <arnd@arndb.de>,
        Nathan Chancellor <nathan@kernel.org>,
        Nick Desaulniers <ndesaulniers@google.com>,
        Tom Rix <trix@redhat.com>,
        Henning Schild <henning.schild@siemens.com>,
        Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        Lee Jones <lee@kernel.org>,
        platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org,
        llvm@lists.linux.dev
Subject: [PATCH] platform/x86/siemens: simatic-ipc: fix nonsensical condition
Date:   Fri, 11 Aug 2023 15:09:34 +0200
Message-Id: <20230811130948.2211800-1-arnd@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Arnd Bergmann <arnd@arndb.de>

The condition checking for a constant SIMATIC_IPC_DEVICE_BX_59A value
clearly makes no sense, as clang warns:

drivers/platform/x86/siemens/simatic-ipc.c:132:42: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
                if (ledmode == SIMATIC_IPC_DEVICE_227G || SIMATIC_IPC_DEVICE_BX_59A)
                                                       ^  ~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/platform/x86/siemens/simatic-ipc-batt.c:197:49: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
                if (priv.devmode == SIMATIC_IPC_DEVICE_BX_21A || SIMATIC_IPC_DEVICE_BX_59A)
                                                              ^  ~~~~~~~~~~~~~~~~~~~~~~~~~

Most likely, this was meant to check ledmode to be one of the two values,
so change it to that.

Fixes: b8af77951941e ("platform/x86/siemens: simatic-ipc: add new models BX-56A/BX-59A")
Fixes: c56beff203754 ("platform/x86/siemens: simatic-ipc-batt: add support for module BX-59A")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/platform/x86/siemens/simatic-ipc-batt.c | 3 ++-
 drivers/platform/x86/siemens/simatic-ipc.c      | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/siemens/simatic-ipc-batt.c b/drivers/platform/x86/siemens/simatic-ipc-batt.c
index d66b9969234bf..e6c12c52843ca 100644
--- a/drivers/platform/x86/siemens/simatic-ipc-batt.c
+++ b/drivers/platform/x86/siemens/simatic-ipc-batt.c
@@ -194,7 +194,8 @@ int simatic_ipc_batt_probe(struct platform_device *pdev, struct gpiod_lookup_tab
 
 	if (table->table[2].key) {
 		flags = GPIOD_OUT_HIGH;
-		if (priv.devmode == SIMATIC_IPC_DEVICE_BX_21A || SIMATIC_IPC_DEVICE_BX_59A)
+		if (priv.devmode == SIMATIC_IPC_DEVICE_BX_21A ||
+		    priv.devmode == SIMATIC_IPC_DEVICE_BX_59A)
 			flags = GPIOD_OUT_LOW;
 		priv.gpios[2] = devm_gpiod_get_index(dev, "CMOSBattery meter", 2, flags);
 		if (IS_ERR(priv.gpios[2])) {
diff --git a/drivers/platform/x86/siemens/simatic-ipc.c b/drivers/platform/x86/siemens/simatic-ipc.c
index 02c540cf40702..e11d28ffac604 100644
--- a/drivers/platform/x86/siemens/simatic-ipc.c
+++ b/drivers/platform/x86/siemens/simatic-ipc.c
@@ -129,7 +129,8 @@ static int register_platform_devices(u32 station_id)
 		pdevname = KBUILD_MODNAME "_leds";
 		if (ledmode == SIMATIC_IPC_DEVICE_127E)
 			pdevname = KBUILD_MODNAME "_leds_gpio_apollolake";
-		if (ledmode == SIMATIC_IPC_DEVICE_227G || SIMATIC_IPC_DEVICE_BX_59A)
+		if (ledmode == SIMATIC_IPC_DEVICE_227G ||
+		    ledmode == SIMATIC_IPC_DEVICE_BX_59A)
 			pdevname = KBUILD_MODNAME "_leds_gpio_f7188x";
 		if (ledmode == SIMATIC_IPC_DEVICE_BX_21A)
 			pdevname = KBUILD_MODNAME "_leds_gpio_elkhartlake";
-- 
2.39.2