Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Apurva Nandan <a-nandan@ti.com>
To:     Apurva Nandan <a-nandan@ti.com>, Nishanth Menon <nm@ti.com>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Tero Kristo <kristo@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        Hari Nagalla <hnagalla@ti.com>, Udit Kumar <u-kumar1@ti.com>
Subject: [PATCH v3 2/5] arm64: dts: ti: k3-j721s2-main: Add MAIN R5F remote processsor nodes
Date:   Sat, 12 Aug 2023 01:52:49 +0530
Message-ID: <20230811202252.3586926-3-a-nandan@ti.com>
In-Reply-To: <20230811202252.3586926-1-a-nandan@ti.com>
References: <20230811202252.3586926-1-a-nandan@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

The J721S2 SoCs have 2 dual-core Arm Cortex-R5F processor (R5FSS)
subsystems/clusters in MAIN voltage domain. Each of these can be
configured at boot time to be either run in a LockStep mode or in an
Asymmetric Multi Processing (AMP) fashion in Split-mode. These
subsystems have 64 KB each Tightly-Coupled Memory (TCM) internal
memories for each core split between two banks - ATCM and BTCM
(further interleaved into two banks). The TCMs of both Cores are
combined in LockStep-mode to provide a larger 128 KB of memory, but
otherwise are functionally similar to those on J721E SoCs.

Add the DT nodes for the MAIN domain R5F cluster/subsystems, the two
R5F cores are added as child nodes to each of the R5F cluster nodes.
The clusters are configured to run in LockStep mode by default, with
the ATCMs enabled to allow the R5 cores to execute code from DDR
with boot-strapping code from ATCM. The inter-processor communication
between the main A72 cores and these processors is achieved through
shared memory and Mailboxes.

The following firmware names are used by default for these cores, and
can be overridden in a board dts file if desired:
  MAIN R5FSS0 Core0: j721s2-main-r5f0_0-fw (both in LockStep & Split mode)
  MAIN R5FSS0 Core1: j721s2-main-r5f0_1-fw (needed only in Split mode)
  MAIN R5FSS1 Core0: j721s2-main-r5f1_0-fw (both in LockStep & Split mode)
  MAIN R5FSS1 Core1: j721s2-main-r5f1_1-fw (needed only in Split mode)

Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 80 ++++++++++++++++++++++
 1 file changed, 80 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index dc7920a35237..a8e23b5c6fd5 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -1688,4 +1688,84 @@ dss: dss@4a00000 {
 		dss_ports: ports {
 		};
 	};
+
+	main_r5fss0: r5fss@5c00000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
+			 <0x5d00000 0x00 0x5d00000 0x20000>;
+		power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss0_core0: r5f@5c00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5c00000 0x00010000>,
+			      <0x5c10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <279>;
+			ti,sci-proc-ids = <0x06 0xff>;
+			resets = <&k3_reset 279 1>;
+			firmware-name = "j721s2-main-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss0_core1: r5f@5d00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5d00000 0x00010000>,
+			      <0x5d10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <280>;
+			ti,sci-proc-ids = <0x07 0xff>;
+			resets = <&k3_reset 280 1>;
+			firmware-name = "j721s2-main-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	main_r5fss1: r5fss@5e00000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
+			 <0x5f00000 0x00 0x5f00000 0x20000>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss1_core0: r5f@5e00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5e00000 0x00010000>,
+			      <0x5e10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <281>;
+			ti,sci-proc-ids = <0x08 0xff>;
+			resets = <&k3_reset 281 1>;
+			firmware-name = "j721s2-main-r5f1_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss1_core1: r5f@5f00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5f00000 0x00010000>,
+			      <0x5f10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <282>;
+			ti,sci-proc-ids = <0x09 0xff>;
+			resets = <&k3_reset 282 1>;
+			firmware-name = "j721s2-main-r5f1_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
 };
-- 
2.34.1