Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To:     agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        conor+dt@kernel.org
Cc:     linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, bryan.odonoghue@linaro.org
Subject: [PATCH v3 7/7] arm64: dts: qcom: apq8016-sbc: Enable camss for non-mezzanine cases
Date:   Sat, 12 Aug 2023 00:47:38 +0100
Message-ID: <20230811234738.2859417-8-bryan.odonoghue@linaro.org>
In-Reply-To: <20230811234738.2859417-1-bryan.odonoghue@linaro.org>
References: <20230811234738.2859417-1-bryan.odonoghue@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

When we have no camera mezzanine attached it is still possible to run the
test-pattern generator of the CSID block.

As an example:

media-ctl --reset

yavta --no-query -w '0x009f0903 1' /dev/v4l-subdev2
yavta --list /dev/v4l-subdev2

media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:UYVY8_1X16/1920x1080 field:none]'
media-ctl -l '"msm_csid0":1->"msm_ispif0":0[1]'
media-ctl -d /dev/media0 -V '"msm_ispif0":0[fmt:UYVY8_1X16/1920x1080 field:none]'
media-ctl -l '"msm_ispif0":1->"msm_vfe0_rdi0":0[1]'
media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:UYVY8_1X16/1920x1080]'
media-ctl -d /dev/media0 -p

yavta -B capture-mplane --capture=5 -n 5 -I -f UYVY -s 1920x1080 --file=TPG-UYVU-1920x1080-000-#.bin /dev/video0

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index c3cd08aa5c85b..4f5541e9be0e9 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -226,6 +226,10 @@ &blsp_uart2 {
 	label = "LS-UART1";
 };
 
+&camss {
+	status = "okay";
+};
+
 &lpass {
 	status = "okay";
 };
-- 
2.41.0