Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To:     agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        conor+dt@kernel.org
Cc:     linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, bryan.odonoghue@linaro.org
Subject: [PATCH v3 5/7] arm64: dts: qcom: apq8016-sbc: Rename ov5640 enable-gpios to powerdown-gpios
Date:   Sat, 12 Aug 2023 00:47:36 +0100
Message-ID: <20230811234738.2859417-6-bryan.odonoghue@linaro.org>
In-Reply-To: <20230811234738.2859417-1-bryan.odonoghue@linaro.org>
References: <20230811234738.2859417-1-bryan.odonoghue@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

There are two control lines controlled by GPIO going into ov5640

- Reset
- Powerdown

The driver and yaml expect "reset-gpios" and "powerdown-gpios" there has
never been an "enable-gpios".

Fixes: 39e0ce6cd1bf ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index ada0777567623..ddb19709a9eee 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -273,7 +273,7 @@ camera_rear@3b {
 		compatible = "ovti,ov5640";
 		reg = <0x3b>;
 
-		enable-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&camera_rear_default>;
-- 
2.41.0