Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Mon, 14 Aug 2023 14:05:04 +0530
From:   Varadarajan Narayanan <quic_varada@quicinc.com>
To:     Vinod Koul <vkoul@kernel.org>
CC:     <agross@kernel.org>, <andersson@kernel.org>,
        <konrad.dybcio@linaro.org>, <kishon@kernel.org>,
        <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <conor+dt@kernel.org>, <catalin.marinas@arm.com>,
        <will@kernel.org>, <p.zabel@pengutronix.de>, <arnd@arndb.de>,
        <geert+renesas@glider.be>, <nfraprado@collabora.com>,
        <rafal@milecki.pl>, <peng.fan@nxp.com>,
        <quic_srichara@quicinc.com>, <linux-arm-msm@vger.kernel.org>,
        <linux-phy@lists.infradead.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v7 2/5] phy: qcom-m31: Introduce qcom,m31 USB phy driver
Message-ID: <20230814083503.GA3490@varda-linux.qualcomm.com>
References: <cover.1691660905.git.quic_varada@quicinc.com>
 <b17b55b2ff2277bb9bfa99acdb2f98ed420dfb6e.1691660905.git.quic_varada@quicinc.com>
 <ZNXxja5HvVOtgliL@matsya>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: inline
In-Reply-To: <ZNXxja5HvVOtgliL@matsya>
User-Agent: Mutt/1.5.24 (2015-08-30)
Precedence: bulk

On Fri, Aug 11, 2023 at 09:30:05AM +0100, Vinod Koul wrote:
> On 10-08-23, 15:26, Varadarajan Narayanan wrote:
> > Add the M31 USB2 phy driver.
>	.
>	.
>	.
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/of.h>
>
> do you need both headers..?
>
>	.
>	.
>	.
> > + #define FREQ_24MHZ			(GENMASK(6, 6) | GENMASK(4, 4))
>
> why not use bit :-)
>	.
>	.
>	.
> > +struct m31_phy_regs m31_ipq5332_regs[] = {
> > +	{ USB_PHY_CFG0, UTMI_PHY_OVERRIDE_EN, 0 },
> > +	{ USB_PHY_UTMI_CTRL5, POR_EN, 15 },
> > +	{ USB_PHY_FSEL_SEL, FREQ_SEL, 0 },
> > +	{ USB_PHY_HS_PHY_CTRL_COMMON0, COMMONONN | FREQ_24MHZ | RETENABLEN, 0 },
> > +	{ USB_PHY_UTMI_CTRL5, POR_EN, 0 },
> > +	{ USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N_SEL | USB2_SUSPEND_N | USB2_UTMI_CLK_EN, 0 },
> > +	{ USB2PHY_USB_PHY_M31_XCFGI_11, XCFG_COARSE_TUNE_NUM  | XCFG_FINE_TUNE_NUM, 0 },
> > +	{ USB2PHY_USB_PHY_M31_XCFGI_4, HSTX_SLEW_RATE_565PS | PLL_CHARGING_PUMP_CURRENT_35UA |
> > +				       ODT_VALUE_38_02_OHM, 0 },
> > +	{ USB2PHY_USB_PHY_M31_XCFGI_1, USB2_0_TX_ENABLE, 0 },
> > +	{ USB2PHY_USB_PHY_M31_XCFGI_5, ODT_VALUE_45_02_OHM | HSTX_PRE_EMPHASIS_LEVEL_0_55MA, 4 },
> > +	{ USB_PHY_UTMI_CTRL5, 0x0, 0 },
> > +	{ USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N | USB2_UTMI_CLK_EN, 0 },
>
> More readable way to code
>                 USB_PHY_CFG0,
>                 UTMI_PHY_OVERRIDE_EN,
>                 0
>
> and so on, makes a better read and check for errors, one line for off,
> one for val and one for delay
>
> --
> `~Vinod

Have posted a new version addressing these (and Konrad's and Bjorn's) issues.
Please review.

Thanks
Varada