Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Jack Zhu <jack.zhu@starfivetech.com>
To:     Mauro Carvalho Chehab <mchehab@kernel.org>,
        Robert Foss <rfoss@kernel.org>,
        Todor Tomov <todor.too@gmail.com>,
        <bryan.odonoghue@linaro.org>, Rob Herring <robh+dt@kernel.org>,
        "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Hans Verkuil <hverkuil-cisco@xs4all.nl>
CC:     <linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <linux-staging@lists.linux.dev>,
        <jack.zhu@starfivetech.com>, <changhuang.liang@starfivetech.com>
Subject: [PATCH v8 0/8] Add StarFive Camera Subsystem driver
Date:   Thu, 24 Aug 2023 16:01:01 +0800
Message-ID: <20230824080109.89613-1-jack.zhu@starfivetech.com>
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 8BIT
Precedence: bulk

Hi,

This series is the v8 series that attempts to support the Camera Subsystem
found on StarFive JH7110 SoC.

The following are the media graph for the device and the v4l2-compliance
output.

===========================================================================
[the media graph]:

digraph board {
	rankdir=TB
	n00000001 [label="{{<port0> 0} | stf_isp\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
	n00000001:port1 -> n00000008 [style=dashed]
	n00000004 [label="capture_raw\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
	n00000008 [label="capture_yuv\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
	n0000000e [label="{{<port0> 0} | cdns_csi2rx.19800000.csi-bridge\n | {<port1> 1 | <port2> 2 | <port3> 3 | <port4> 4}}", shape=Mrecord, style=filled, fillcolor=green]
	n0000000e:port1 -> n00000001:port0 [style=dashed]
	n0000000e:port1 -> n00000004 [style=dashed]
	n00000018 [label="{{} | imx219 6-0010\n/dev/v4l-subdev1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
	n00000018:port0 -> n0000000e:port0 [style=bold]
}

[the device topology]:

Media controller API version 6.5.0

Media device information
------------------------
driver          starfive-camss
model           Starfive Camera Subsystem
serial          
bus info        platform:19840000.camss
hw revision     0x0
driver version  6.5.0

Device topology
- entity 1: stf_isp (2 pads, 2 links)
            type V4L2 subdev subtype Unknown flags 0
            device node name /dev/v4l-subdev0
	pad0: Sink
		[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:srgb
		 crop.bounds:(0,0)/1920x1080
		 crop:(0,0)/1920x1080]
		<- "cdns_csi2rx.19800000.csi-bridge":1 []
	pad1: Source
		[fmt:YUYV8_1_5X8/1920x1080 field:none colorspace:srgb
		 crop.bounds:(0,0)/1920x1080
		 crop:(0,0)/1920x1080]
		-> "capture_yuv":0 []

- entity 4: capture_raw (1 pad, 1 link)
            type Node subtype V4L flags 0
            device node name /dev/video0
	pad0: Sink
		<- "cdns_csi2rx.19800000.csi-bridge":1 []

- entity 8: capture_yuv (1 pad, 1 link)
            type Node subtype V4L flags 0
            device node name /dev/video1
	pad0: Sink
		<- "stf_isp":1 []

- entity 14: cdns_csi2rx.19800000.csi-bridge (5 pads, 3 links)
             type V4L2 subdev subtype Unknown flags 0
	pad0: Sink
		<- "imx219 6-0010":0 [ENABLED,IMMUTABLE]
	pad1: Source
		-> "stf_isp":0 []
		-> "capture_raw":0 []
	pad2: Source
	pad3: Source
	pad4: Source

- entity 24: imx219 6-0010 (1 pad, 1 link)
             type V4L2 subdev subtype Sensor flags 0
             device node name /dev/v4l-subdev1
	pad0: Source
		[fmt:SRGGB10_1X10/3280x2464 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range
		 crop.bounds:(8,8)/3280x2464
		 crop:(8,8)/3280x2464]
		-> "cdns_csi2rx.19800000.csi-bridge":0 [ENABLED,IMMUTABLE]

===========================================================================
[the v4l2-compliance output]:

v4l2-compliance 1.24.1, 64 bits, 64-bit time_t

Compliance test for stf camss device /dev/video1:

Driver Info:
	Driver name      : stf camss
	Card type        : Starfive Camera Subsystem
	Bus info         : platform:19840000.camss
	Driver version   : 6.5.0
	Capabilities     : 0x84200001
		Video Capture
		Streaming
		Extended Pix Format
		Device Capabilities
	Device Caps      : 0x04200001
		Video Capture
		Streaming
		Extended Pix Format
Media Driver Info:
	Driver name      : starfive-camss
	Model            : Starfive Camera Subsystem
	Serial           : 
	Bus info         : platform:19840000.camss
	Media version    : 6.5.0
	Hardware revision: 0x00000000 (0)
	Driver version   : 6.5.0
Interface Info:
	ID               : 0x0300000a
	Type             : V4L Video
Entity Info:
	ID               : 0x00000008 (8)
	Name             : capture_yuv
	Function         : V4L2 I/O
	Pad 0x01000009   : 0: Sink
	  Link 0x0200000c: from remote pad 0x1000003 of entity 'stf_isp' (Unknown Function (00004009)): Data, Enabled

Required ioctls:
	test MC information (see 'Media Driver Info' above): OK
	test VIDIOC_QUERYCAP: OK
	test invalid ioctls: OK

Allow for multiple opens:
	test second /dev/video1 open: OK
	test VIDIOC_QUERYCAP: OK
	test VIDIOC_G/S_PRIORITY: OK
	test for unlimited opens: OK

Debug ioctls:
	test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
	test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
	test VIDIOC_ENUMAUDIO: OK (Not Supported)
	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDIO: OK (Not Supported)
	Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
	Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
	test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
	test VIDIOC_QUERYCTRL: OK (Not Supported)
	test VIDIOC_G/S_CTRL: OK (Not Supported)
	test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
	Standard Controls: 0 Private Controls: 0

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	test VIDIOC_G/S_PARM: OK (Not Supported)
	test VIDIOC_G_FBUF: OK (Not Supported)
	test VIDIOC_G_FMT: OK
	test VIDIOC_TRY_FMT: OK
	test VIDIOC_S_FMT: OK
	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
	test Cropping: OK (Not Supported)
	test Composing: OK (Not Supported)
	test Scaling: OK

Codec ioctls:
	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
	test VIDIOC_EXPBUF: OK
	test Requests: OK (Not Supported)

Test input 0:

Streaming ioctls:
	test read/write: OK (Not Supported)
	test blocking wait: OK
	test MMAP (no poll): OK                           
	test MMAP (select): OK                            
	test MMAP (epoll): OK                             
	test USERPTR (no poll): OK (Not Supported)
	test USERPTR (select): OK (Not Supported)
	test DMABUF: Cannot test, specify --expbuf-device

Total for stf camss device /dev/video1: 53, Succeeded: 53, Failed: 0, Warnings: 0

===========================================================================

Changes in v8:
- Rebased on v6.5-rc7.
- Dropped VIN subdev.
- Created two new video devices: capture_raw and capture_yuv, to replace
  the previous video devices.
- Dropped VB2_READ io methods.
- Recursively called .s_stream() on subdevs.

v7 link: https://lore.kernel.org/all/20230619112838.19797-1-jack.zhu@starfivetech.com/

Changes in v7:
- HAS_DMA is used instead of DMA_CMA in Kconfig.
- Dropped some non-essential member variables.
- Used v4l2_async_nf_add_fwnode_remote() to simplify the relevant code.
- Modified some Local variable types in the function.
- Used v4l2_create_fwnode_links_to_pad() to simplify the relevant code.
- Added error handling for clk_prepare_enable().
- Simplified stfcamss_format_info struct and modified the relevant code.
- Dropped enum_input, g_input and s_input.
- Unified v4l2_ioctl_ops struct.
- Used v4l2_fh_open()/vb2_fop_release to replace deprecated APIs.
- Added a camss directory under the starfive directory and modified the
  patch title.

v6 link: https://lore.kernel.org/all/20230525083202.67933-1-jack.zhu@starfivetech.com/

Changes in v6:
- Added 'bus-type' in bindings example.
- Corrected spelling errors.
- As reviewed by Bryan, used 'nclks' and 'nrsts' variables.
- Added lccf config for ISP.

v5 link: https://lore.kernel.org/all/20230512102844.51084-1-jack.zhu@starfivetech.com/

Changes in v5:
- Rebased on v6.4-rc1.
- Added new patch.
- Modified ISP driver.

v4 link: https://lore.kernel.org/all/20230413035541.62129-1-jack.zhu@starfivetech.com/

Previous cover letter from v4:

This patch series adds support for the StarFive Camera Subsystem
found on StarFive JH7110 SoC.

The driver implements V4L2, Media controller and V4L2 subdev interfaces.
Camera sensor using V4L2 subdev interface in the kernel is supported.

The driver is tested on VisionFive V2 board with IMX219 camera sensor.
GStreamer 1.18.5 with v4l2src plugin is supported.

Previous version link, missing v1 version:

  v3: https://lore.kernel.org/all/20230331121826.96973-1-jack.zhu@starfivetech.com/
  v2: https://lore.kernel.org/all/20230310120553.60586-1-jack.zhu@starfivetech.com/

Jack Zhu (8):
  media: dt-bindings: Add JH7110 Camera Subsystem
  media: admin-guide: Add starfive_camss.rst for Starfive Camera
    Subsystem
  media: staging: media: starfive: camss: Add core driver
  media: staging: media: starfive: camss: Add video driver
  media: staging: media: starfive: camss: Add ISP driver
  media: staging: media: starfive: camss: Add capture driver
  media: staging: media: starfive: camss: Add interrupt handling
  media: staging: media: starfive: camss: Register devices

 .../admin-guide/media/starfive_camss.rst      |  72 +++
 .../media/starfive_camss_graph.dot            |  12 +
 .../admin-guide/media/v4l-drivers.rst         |   1 +
 .../bindings/media/starfive,jh7110-camss.yaml | 180 ++++++
 MAINTAINERS                                   |   9 +
 drivers/staging/media/Kconfig                 |   2 +
 drivers/staging/media/Makefile                |   1 +
 drivers/staging/media/starfive/Kconfig        |   5 +
 drivers/staging/media/starfive/Makefile       |   2 +
 drivers/staging/media/starfive/camss/Kconfig  |  17 +
 drivers/staging/media/starfive/camss/Makefile |  13 +
 .../staging/media/starfive/camss/stf_camss.c  | 432 +++++++++++++
 .../staging/media/starfive/camss/stf_camss.h  | 134 ++++
 .../media/starfive/camss/stf_capture.c        | 603 ++++++++++++++++++
 .../media/starfive/camss/stf_capture.h        |  87 +++
 .../staging/media/starfive/camss/stf_isp.c    | 407 ++++++++++++
 .../staging/media/starfive/camss/stf_isp.h    | 428 +++++++++++++
 .../media/starfive/camss/stf_isp_hw_ops.c     | 445 +++++++++++++
 .../staging/media/starfive/camss/stf_video.c  | 557 ++++++++++++++++
 .../staging/media/starfive/camss/stf_video.h  | 100 +++
 20 files changed, 3507 insertions(+)
 create mode 100644 Documentation/admin-guide/media/starfive_camss.rst
 create mode 100644 Documentation/admin-guide/media/starfive_camss_graph.dot
 create mode 100644 Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
 create mode 100644 drivers/staging/media/starfive/Kconfig
 create mode 100644 drivers/staging/media/starfive/Makefile
 create mode 100644 drivers/staging/media/starfive/camss/Kconfig
 create mode 100644 drivers/staging/media/starfive/camss/Makefile
 create mode 100644 drivers/staging/media/starfive/camss/stf_camss.c
 create mode 100644 drivers/staging/media/starfive/camss/stf_camss.h
 create mode 100644 drivers/staging/media/starfive/camss/stf_capture.c
 create mode 100644 drivers/staging/media/starfive/camss/stf_capture.h
 create mode 100644 drivers/staging/media/starfive/camss/stf_isp.c
 create mode 100644 drivers/staging/media/starfive/camss/stf_isp.h
 create mode 100644 drivers/staging/media/starfive/camss/stf_isp_hw_ops.c
 create mode 100644 drivers/staging/media/starfive/camss/stf_video.c
 create mode 100644 drivers/staging/media/starfive/camss/stf_video.h

-- 
2.34.1