Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   William Qiu <william.qiu@starfivetech.com>
To:     <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-riscv@lists.infradead.org>, <linux-pwm@vger.kernel.org>
CC:     Emil Renner Berthing <kernel@esmil.dk>,
        Rob Herring <robh+dt@kernel.org>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Thierry Reding <thierry.reding@gmail.com>,
        =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= 
        <u.kleine-koenig@pengutronix.de>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        "Paul Walmsley" <paul.walmsley@sifive.com>,
        Palmer Dabbelt <palmer@dabbelt.com>,
        Albert Ou <aou@eecs.berkeley.edu>,
        Hal Feng <hal.feng@starfivetech.com>,
        William Qiu <william.qiu@starfivetech.com>
Subject: [RFC v4 4/4] riscv: dts: starfive: jh7100: Add PWM node and pins configuration
Date:   Fri, 25 Aug 2023 16:13:28 +0800
Message-ID: <20230825081328.204442-5-william.qiu@starfivetech.com>
In-Reply-To: <20230825081328.204442-1-william.qiu@starfivetech.com>
References: <20230825081328.204442-1-william.qiu@starfivetech.com>
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 8BIT
Precedence: bulk

Add StarFive JH7100 PWM controller node and add PWM pins configuration
on VisionFive 2 board.

Signed-off-by: William Qiu <william.qiu@starfivetech.com>
---
 .../boot/dts/starfive/jh7100-common.dtsi      | 24 +++++++++++++++++++
 arch/riscv/boot/dts/starfive/jh7100.dtsi      |  9 +++++++
 2 files changed, 33 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
index b93ce351a90f..746867b882b0 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
@@ -84,6 +84,24 @@ GPO_I2C2_PAD_SDA_OEN,
 		};
 	};

+	pwm_pins: pwm-0 {
+		pwm-pins {
+			pinmux = <GPIOMUX(7,
+				  GPO_PWM_PAD_OUT_BIT0,
+				  GPO_PWM_PAD_OE_N_BIT0,
+				  GPI_NONE)>,
+				 <GPIOMUX(5,
+				  GPO_PWM_PAD_OUT_BIT1,
+				  GPO_PWM_PAD_OE_N_BIT1,
+				  GPI_NONE)>;
+			bias-disable;
+			drive-strength = <35>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
 	uart3_pins: uart3-0 {
 		rx-pins {
 			pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
@@ -154,6 +172,12 @@ &osc_aud {
 	clock-frequency = <27000000>;
 };

+&ptc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
index 4218621ea3b9..7f5bb19e636e 100644
--- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
@@ -248,5 +248,14 @@ watchdog@12480000 {
 			resets = <&rstgen JH7100_RSTN_WDTIMER_APB>,
 				 <&rstgen JH7100_RSTN_WDT>;
 		};
+
+		ptc: pwm@12490000 {
+			compatible = "starfive,jh7100-pwm";
+			reg = <0x0 0x12490000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_PWM_APB>;
+			resets = <&rstgen JH7100_RSTN_PWM_APB>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
 	};
 };
--
2.34.1