Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 30 Aug 2023 12:08:17 +0100
From:   "Russell King (Oracle)" <linux@armlinux.org.uk>
To:     Lukasz Majewski <lukma@denx.de>
Cc:     Eric Dumazet <edumazet@google.com>, Andrew Lunn <andrew@lunn.ch>,
        davem@davemloft.net, Woojung Huh <woojung.huh@microchip.com>,
        Vladimir Oltean <olteanv@gmail.com>,
        Oleksij Rempel <o.rempel@pengutronix.de>,
        Tristram.Ha@microchip.com, Florian Fainelli <f.fainelli@gmail.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>, UNGLinuxDriver@microchip.com,
        Heiner Kallweit <hkallweit1@gmail.com>, netdev@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] net: phy: Provide Module 4 KSZ9477 errata
 (DS80000754C)
Message-ID: <ZO8jIQJLE53GH6G6@shell.armlinux.org.uk>
References: <20230830092119.458330-1-lukma@denx.de>
 <20230830092119.458330-2-lukma@denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20230830092119.458330-2-lukma@denx.de>
Sender: Russell King (Oracle) <linux@armlinux.org.uk>
Precedence: bulk

On Wed, Aug 30, 2023 at 11:21:19AM +0200, Lukasz Majewski wrote:
> +	/* KSZ9477 Errata DS80000754C
> +	 *
> +	 * Module 4: Energy Efficient Ethernet (EEE) feature select must be
> +	 * manually disabled
> +	 *   The EEE feature is enabled by default, but it is not fully
> +	 *   operational. It must be manually disabled through register
> +	 *   controls. If not disabled, the PHY ports can auto-negotiate
> +	 *   to enable EEE, and this feature can cause link drops when linked
> +	 *   to another device supporting EEE.
> +	 *
> +	 *   Although, the KSZ9477 MMD register
> +	 *   (MMD_DEVICE_ID_EEE_ADV.MMD_EEE_ADV) advertise that EEE is
> +	 *   operational one needs to manualy clear them to follow the chip
> +	 *   errata.
> +	 */
> +	linkmode_and(phydev->supported_eee, phydev->supported, zero);

Hi,

I'm wondering whether you had a reason to write the above, rather than
use the simpler:

	linkmode_zero(phydev->supported_eee);

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!