Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) client-ip=2620:137:e000::3:7;
From:   Bartosz Golaszewski <brgl@bgdev.pl>
To:     Linus Walleij <linus.walleij@linaro.org>,
        Andy Shevchenko <andy@kernel.org>,
        Ulf Hansson <ulf.hansson@linaro.org>,
        Paul Cercueil <paul@crapouillou.net>,
        Harvey Hunt <harveyhuntnexus@gmail.com>,
        Miquel Raynal <miquel.raynal@bootlin.com>,
        Richard Weinberger <richard@nod.at>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Daniel Scally <djrscally@gmail.com>,
        Hans de Goede <hdegoede@redhat.com>,
        Mark Gross <markgross@kernel.org>,
        Heiner Kallweit <hkallweit1@gmail.com>
Cc:     linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-mmc@vger.kernel.org, linux-mips@vger.kernel.org,
        linux-mtd@lists.infradead.org, platform-driver-x86@vger.kernel.org,
        Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: [PATCH 2/5] mtd: rawnand: ingenic: use gpiod_set_active_high()
Date:   Wed, 13 Sep 2023 13:49:58 +0200
Message-Id: <20230913115001.23183-3-brgl@bgdev.pl>
In-Reply-To: <20230913115001.23183-1-brgl@bgdev.pl>
References: <20230913115001.23183-1-brgl@bgdev.pl>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Use the new, less cumbersome interface for setting the GPIO as
active-high that doesn't require first checking the current state.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
index 6748226b8bd1..c055133c45fe 100644
--- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
@@ -388,9 +388,8 @@ static int ingenic_nand_init_chip(struct platform_device *pdev,
 	 * here for older DTs so we can re-use the generic nand_gpio_waitrdy()
 	 * helper, and be consistent with what other drivers do.
 	 */
-	if (of_machine_is_compatible("qi,lb60") &&
-	    gpiod_is_active_low(nand->busy_gpio))
-		gpiod_toggle_active_low(nand->busy_gpio);
+	if (of_machine_is_compatible("qi,lb60"))
+		gpiod_set_active_high(nand->busy_gpio);
 
 	nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
 
-- 
2.39.2