Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:5 as permitted sender) client-ip=2620:137:e000::3:5;
From:   Danila Tikhonov <danila@jiaxyga.com>
To:     agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        conor+dt@kernel.org
Cc:     linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Danila Tikhonov <danila@jiaxyga.com>
Subject: [PATCH] arm64: dts: qcom: pm8150l: Add wled node
Date:   Wed, 13 Sep 2023 21:55:14 +0300
Message-ID: <20230913185514.21840-1-danila@jiaxyga.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

WLED is used for controlling the backlight on some boards, add the node
for it.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
---
 arch/arm64/boot/dts/qcom/pm8150l.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index b1686e5777b8..ac08a09c64c2 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -132,5 +132,15 @@ pm8150l_lpg: pwm {
 			status = "disabled";
 		};
 
+		pm8150l_wled: leds@d800 {
+			compatible = "qcom,pm8150l-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
+			label = "backlight";
+
+			status = "disabled";
+		};
 	};
 };
-- 
2.41.0