Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:8 as permitted sender) client-ip=2620:137:e000::3:8;
Message-ID: <357805c5-bedb-8972-bcf1-fabaaaf90ad9@linaro.org>
Date:   Thu, 14 Sep 2023 08:15:39 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.15.0
Subject: Re: [PATCH v7 4/4] clk: qcom: add clock controller driver for
 qca8386/qca8084
Content-Language: en-US
To:     Luo Jie <quic_luoj@quicinc.com>, andersson@kernel.org,
        agross@kernel.org, konrad.dybcio@linaro.org,
        mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
        catalin.marinas@arm.com, will@kernel.org, p.zabel@pengutronix.de
Cc:     linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        quic_srichara@quicinc.com
References: <20230914054639.13075-1-quic_luoj@quicinc.com>
 <20230914054639.13075-5-quic_luoj@quicinc.com>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230914054639.13075-5-quic_luoj@quicinc.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 14/09/2023 07:46, Luo Jie wrote:
> The clock controller driver of qca8386/qca8084 is registered
> as the MDIO device, the hardware register is accessed by MDIO bus
> that is normally used to access general PHY device, which is
> different from the current existed qcom clock controller drivers
> using ioremap to access hardware clock registers.
> 
> MDIO bus is common utilized by both qca8386/qca8084 and other
> PHY devices, so the mutex lock mdio_bus->mdio_lock should be
> used instead of using the mutex lock of remap.
> 
> To access the hardware clock registers of qca8386/qca8084, there
> is special MDIO frame sequence(three MDIO read/write operations)
> need to be sent to device.
> 
> Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
> ---
>  drivers/clk/qcom/Kconfig       |    9 +
>  drivers/clk/qcom/Makefile      |    1 +
>  drivers/clk/qcom/nsscc-qca8k.c | 2178 ++++++++++++++++++++++++++++++++
>  3 files changed, 2188 insertions(+)
>  create mode 100644 drivers/clk/qcom/nsscc-qca8k.c
> 
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 865db5202e4c..c95ada6a1385 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -203,6 +203,15 @@ config IPQ_GCC_9574
>  	  i2c, USB, SD/eMMC, etc. Select this for the root clock
>  	  of ipq9574.
>  
> +config IPQ_NSSCC_QCA8K
> +	tristate "QCA8K(QCA8386 or QCA8084) NSS Clock Controller"
> +	depends on MDIO_BUS || COMPILE_TEST

This is SoC is for both ARM and ARM64 worlds?

> +	help
> +	  Support for NSS(Network SubSystem) clock controller on
> +	  qca8386/qca8084 chip.
> +	  Say Y or M if you want to use network features of switch or
> +	  PHY device. Select this for the root clock of qca8k.
> +


Best regards,
Krzysztof