Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) client-ip=23.128.96.34;
From:   Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Date:   Thu, 14 Sep 2023 12:29:58 +0530
Subject: [PATCH v2 08/11] arm64: dts: qcom: ipq8074: include the GPLL0 as
 clock provider for mailbox
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-ID: <20230913-gpll_cleanup-v2-8-c8ceb1a37680@quicinc.com>
References: <20230913-gpll_cleanup-v2-0-c8ceb1a37680@quicinc.com>
In-Reply-To: <20230913-gpll_cleanup-v2-0-c8ceb1a37680@quicinc.com>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>,
        "Sricharan Ramabadhran" <quic_srichara@quicinc.com>,
        Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>,
        Varadarajan Narayanan <quic_varada@quicinc.com>,
        Anusha Rao <quic_anusha@quicinc.com>,
        Devi Priya <quic_devipriy@quicinc.com>,
        Jassi Brar <jassisinghbrar@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>
CC:     <linux-arm-msm@vger.kernel.org>, <linux-clk@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
        "Kathiravan Thirumoorthy" <quic_kathirav@quicinc.com>
Precedence: bulk

While the kernel is booting up, APSS PLL will be running at 800MHz with
GPLL0 as source. Once the cpufreq driver is available, APSS PLL will be
configured to the rate based on the opp table and the source also will
be changed to APSS_PLL_EARLY. So allow the mailbox to consume the GPLL0,
with this inclusion, CPU Freq correctly reports that CPU is running at
800MHz rather than 24MHz.

Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
---
Changes in V2:
	- Splitted the change into target specific file
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 00ed71936b47..0be19267bdcf 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -719,8 +719,8 @@ apcs_glb: mailbox@b111000 {
 			compatible = "qcom,ipq8074-apcs-apps-global",
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 
 			#clock-cells = <1>;
 			#mbox-cells = <1>;

-- 
2.34.1