Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) client-ip=2620:137:e000::3:7;
From:   Ian Abbott <abbotti@mev.co.uk>
To:     linux-kernel@vger.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Ian Abbott <abbotti@mev.co.uk>,
        H Hartley Sweeten <hsweeten@visionengravers.com>,
        Arnd Bergmann <arnd@kernel.org>,
        Niklas Schnelle <schnelle@linux.ibm.com>
Subject: [PATCH 08/13] comedi: ni_labpc_common: Conditionally remove I/O port support
Date:   Wed, 13 Sep 2023 12:32:42 +0100
Message-Id: <20230913113247.91749-9-abbotti@mev.co.uk>
In-Reply-To: <20230913113247.91749-1-abbotti@mev.co.uk>
References: <20230913113247.91749-1-abbotti@mev.co.uk>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.

The ni_labpc_common module is used by the ni_labpc module (for ISA
cards), the ni_labpc_cs module (for PCMCIA cards), and the ni_labpc_pci
module (for PCI cards).  The ISA and PCMCIA cards use port I/O and the
PCI cards use memory-mapped I/O.

Conditionally compile the parts of the module that use the port I/O
functions so they are compiled if and only if the `CONFIG_HAS_PORTIO`
macro is defined, so that the module can be built if the port I/O
functions have not been declared.

Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
 drivers/comedi/drivers/ni_labpc_common.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/comedi/drivers/ni_labpc_common.c b/drivers/comedi/drivers/ni_labpc_common.c
index 5d5c1d0e9cb6..7170b4e98b5e 100644
--- a/drivers/comedi/drivers/ni_labpc_common.c
+++ b/drivers/comedi/drivers/ni_labpc_common.c
@@ -78,6 +78,9 @@ static const struct comedi_lrange range_labpc_ao = {
  * functions that do inb/outb and readb/writeb so we can use
  * function pointers to decide which to use
  */
+
+#ifdef CONFIG_HAS_PORTIO
+
 static unsigned int labpc_inb(struct comedi_device *dev, unsigned long reg)
 {
 	return inb(dev->iobase + reg);
@@ -89,6 +92,8 @@ static void labpc_outb(struct comedi_device *dev,
 	outb(byte, dev->iobase + reg);
 }
 
+#endif	/* CONFIG_HAS_PORTIO */
+
 static unsigned int labpc_readb(struct comedi_device *dev, unsigned long reg)
 {
 	return readb(dev->mmio + reg);
@@ -1200,8 +1205,12 @@ int labpc_common_attach(struct comedi_device *dev,
 		devpriv->read_byte = labpc_readb;
 		devpriv->write_byte = labpc_writeb;
 	} else {
+#ifdef CONFIG_HAS_PORTIO
 		devpriv->read_byte = labpc_inb;
 		devpriv->write_byte = labpc_outb;
+#else
+		return -ENXIO;
+#endif
 	}
 
 	/* initialize board's command registers */
-- 
2.40.1