Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757860AbXKGN1a (ORCPT ); Wed, 7 Nov 2007 08:27:30 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753562AbXKGN1V (ORCPT ); Wed, 7 Nov 2007 08:27:21 -0500 Received: from usermail.globalproof.net ([194.146.153.18]:32820 "EHLO usermail.globalproof.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753323AbXKGN1U (ORCPT ); Wed, 7 Nov 2007 08:27:20 -0500 From: "Denys Fedoryshchenko" To: Andrew Morton Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org Subject: Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10 Date: Wed, 7 Nov 2007 15:27:05 +0200 Message-Id: <20071107132630.M65286@visp.net.lb> In-Reply-To: <20071106221521.4f64a066.akpm@linux-foundation.org> References: <20071101213013.M54162@visp.net.lb> <20071106221521.4f64a066.akpm@linux-foundation.org> X-Mailer: OpenWebMail 2.52 20060502 X-OriginatingIP: 195.69.208.251 (denys@visp.net.lb) MIME-Version: 1.0 Content-Type: text/plain; charset=koi8-r Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10373 Lines: 241 On Tue, 6 Nov 2007 22:15:21 -0800, Andrew Morton wrote > > On Thu, 1 Nov 2007 23:30:13 +0200 "Denys" wrote: > > Finally i got full DMESG with 1GB card till end. Seems not readable too. > > > > Linux version 2.6.24-rc1-git10-embedded (root@homecore.visp.net.lb) (gcc > > version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #1 Thu Nov 1 23:12:53 EET 2007 > > BIOS-provided physical RAM map: > > BIOS-e801: 0000000000000000 - 000000000009f000 (usable) > > BIOS-e801: 0000000000100000 - 0000000004000000 (usable) > > 64MB LOWMEM available. > > Zone PFN ranges: > > DMA 0 -> 4096 > > Normal 4096 -> 16384 > > Movable zone start PFN for each node > > early_node_map[1] active PFN ranges > > 0: 0 -> 16384 > > DMI not present or invalid. > > Allocating PCI resources starting at 10000000 (gap: 04000000:fc000000) > > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 > > Kernel command line: console=ttyS0,38400n8 > > Initializing CPU#0 > > PID hash table entries: 256 (order: 8, 1024 bytes) > > Detected 266.627 MHz processor. > > Console: colour dummy device 80x25 > > console [ttyS0] enabled > > Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > > Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > > Memory: 62836k/65536k available (1020k kernel code, 2292k reserved, 317k > > data, 112k init, 0k highmem) > > virtual kernel memory layout: > > fixmap : 0xffffb000 - 0xfffff000 ( 16 kB) > > vmalloc : 0xc4800000 - 0xffff9000 ( 951 MB) > > lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) > > .init : 0xc0252000 - 0xc026e000 ( 112 kB) > > .data : 0xc01ff111 - 0xc024e6f4 ( 317 kB) > > .text : 0xc0100000 - 0xc01ff111 (1020 kB) > > Checking if this processor honours the WP bit even in supervisor mode... Ok. > > SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 > > Calibrating delay using timer specific routine.. 534.41 BogoMIPS (lpj=1068836) > > Mount-cache hash table entries: 512 > > Compat vDSO mapped to ffffe000. > > CPU: NSC Unknown stepping 01 > > Checking 'hlt' instruction... OK. > > Freeing SMP alternatives: 0k freed > > net_namespace: 64 bytes > > NET: Registered protocol family 16 > > PCI: PCI BIOS revision 2.10 entry at 0xfc3ad, last bus=0 > > PCI: Using configuration type 1 > > Setting up standard PCI resources > > SCSI subsystem initialized > > PCI: Probing PCI hardware > > PCI: Device 0000:00:12.5 not found by BIOS > > Time: tsc clocksource has been installed. > > NET: Registered protocol family 2 > > IP route cache hash table entries: 1024 (order: 0, 4096 bytes) > > TCP established hash table entries: 2048 (order: 2, 16384 bytes) > > TCP bind hash table entries: 2048 (order: 1, 8192 bytes) > > TCP: Hash tables configured (established 2048 bind 2048) > > TCP reno registered > > scx200: NatSemi SCx200 Driver > > scx200: GPIO base 0xf400 > > scx200: Configuration Block base 0x9000 > > io scheduler noop registered (default) > > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A > > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A > > natsemi dp8381x driver, version 2.1, Sept 11, 2006 > > originally by Donald Becker > > 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder > > natsemi eth0: NatSemi DP8381[56] at 0x80000000 (0000:00:0e.0), > > 00:0d:b9:00:8a:30, IRQ 10, port TP. > > scsi0 : sc1200 > > scsi1 : sc1200 > > ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 > > ata2: DUMMY > > ata1.00: CFA: SanDisk SDCFH-1024, HDX 3.07, max MWDMA2 > > ata1.00: 2001888 sectors, multi 0: LBA > > ata1.00: configured for MWDMA2 > > scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFH-10 HDX PQ: 0 ANSI: 5 > > sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB) > > sd 0:0:0:0: [sda] Write Protect is off > > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support > > DPO or FUA > > sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB) > > sd 0:0:0:0: [sda] Write Protect is off > > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support > > DPO or FUA > > sda:<4>Clocksource tsc unstable (delta = -334501841 ns) > > Time: pit clocksource has been installed. > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in > > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > > ata1.00: status: { DRDY } > > ata1: soft resetting link > > ata1.00: configured for MWDMA2 > > ata1: EH complete > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in > > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > > ata1.00: status: { DRDY } > > ata1: soft resetting link > > ata1.00: configured for MWDMA2 > > ata1: EH complete > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in > > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > > ata1.00: status: { DRDY } > > ata1: soft resetting link > > ata1.00: configured for MWDMA2 > > ata1: EH complete > > ata1.00: limiting speed to MWDMA1:PIO4 > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in > > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > > ata1.00: status: { DRDY } > > ata1: soft resetting link > > ata1.00: configured for MWDMA1 > > ata1: EH complete > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in > > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > > ata1.00: status: { DRDY } > > ata1: soft resetting link > > ata1.00: configured for MWDMA1 > > ata1: EH complete > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in > > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > > ata1.00: status: { DRDY } > > ata1: soft resetting link > > ata1.00: configured for MWDMA1 > > sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 > > sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] > > Descriptor sense data with sense descriptors (in hex): > > 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 > > 00 00 00 00 > > sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0 > > end_request: I/O error, dev sda, sector 0 > > Buffer I/O error on device sda, logical block 0 > > ata1: EH complete > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in > > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > > ata1.00: status: { DRDY } > > ata1: soft resetting link > > ata1.00: configured for MWDMA1 > > ata1: EH complete > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in > > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > > ata1.00: status: { DRDY } > > ata1: soft resetting link > > ata1.00: configured for MWDMA1 > > ata1: EH complete > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in > > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > > ata1.00: status: { DRDY } > > ata1: soft resetting link > > ata1.00: configured for MWDMA1 > > ata1: EH complete > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in > > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > > ata1.00: status: { DRDY } > > ata1: soft resetting link > > ata1.00: configured for MWDMA1 > > ata1: EH complete > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in > > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > > ata1.00: status: { DRDY } > > ata1: soft resetting link > > ata1.00: configured for MWDMA1 > > ata1: EH complete > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in > > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > > ata1.00: status: { DRDY } > > ata1: soft resetting link > > ata1.00: configured for MWDMA1 > > sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 > > sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] > > Descriptor sense data with sense descriptors (in hex): > > 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 > > 00 00 00 00 > > sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0 > > end_request: I/O error, dev sda, sector 0 > > Buffer I/O error on device sda, logical block 0 > > ata1: EH complete > > unable to read partition table > > sd 0:0:0:0: [sda] Attached SCSI removable disk > > scx200_wdt: timer margin 60 seconds > > cpuidle: using governor ladder > > enabling scx200 high-res timer (1 MHz +0 ppm) > > TCP cubic registered > > Time: scx200_hrt clocksource has been installed. > > NET: Registered protocol family 1 > > NET: Registered protocol family 17 > > Using IPI Shortcut mode > > VFS: Cannot open root device "" or unknown-block(8,18) > > Please append a correct "root=" boot option; here are the available > > partitions: > > 0800 1000944 sda driver: sd > > Kernel panic - not syncing: VFS: Unable to mount root fs on unknown- > > block(8,18) > > > > (+linux-ide) > > So this has never worked on any known kernel? It is working now on old ide code (not libata). -- Denys Fedoryshchenko Technical Manager Virtual ISP S.A.L. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/