Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.32 as permitted sender) client-ip=23.128.96.32;
From:   Manikandan Muralidharan <manikandan.m@microchip.com>
To:     <sam@ravnborg.org>, <bbrezillon@kernel.org>, <airlied@gmail.com>,
        <daniel@ffwll.ch>, <nicolas.ferre@microchip.com>,
        <alexandre.belloni@bootlin.com>, <lee@kernel.org>,
        <dri-devel@lists.freedesktop.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>
CC:     <Hari.PrasathGE@microchip.com>,
        <Balamanikandan.Gunasundar@microchip.com>,
        <Durai.ManickamKR@microchip.com>, <Nayabbasha.Sayed@microchip.com>,
        <Dharma.B@microchip.com>, <Varshini.Rajendran@microchip.com>,
        <Balakrishnan.S@microchip.com>,
        Manikandan Muralidharan <manikandan.m@microchip.com>,
        Durai Manickam KR <durai.manickamkr@microchip.com>
Subject: [PATCH v5 5/8] drm: atmel_hlcdc: Add support for XLCDC in atmel LCD driver
Date:   Fri, 15 Sep 2023 16:18:46 +0530
Message-ID: <20230915104849.187146-6-manikandan.m@microchip.com>
In-Reply-To: <20230915104849.187146-1-manikandan.m@microchip.com>
References: <20230915104849.187146-1-manikandan.m@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

- XLCDC in SAM9X7 has different sets of registers and additional
configuration bits when compared to previous HLCDC IP. Read/write
operation on the controller registers is now separated using the
XLCDC status flag and with HLCDC and XLCDC IP specific ops.
	- HEO scaling, window resampling, Alpha blending, YUV-to-RGB
conversion in XLCDC is derived and handled using additional
configuration bits and registers.
	- Writing one to the Enable fields of each layer in LCD_ATTRE
is required to reflect the values set in Configuration, FBA, Enable
registers of each layer

Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Co-developed-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@microchip.com>
Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@microchip.com>
Co-developed-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
 .../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c    |  33 +-
 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c  |  26 ++
 .../gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c   | 317 ++++++++++++++----
 3 files changed, 315 insertions(+), 61 deletions(-)

diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
index cc5cf4c2faf7..1ac31c0c474a 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
@@ -79,6 +79,7 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
 	unsigned int mask = ATMEL_HLCDC_CLKDIV_MASK | ATMEL_HLCDC_CLKPOL;
 	unsigned int cfg = 0;
 	int div, ret;
+	bool is_xlcdc = crtc->dc->desc->is_xlcdc;
 
 	/* get encoder from crtc */
 	drm_for_each_encoder(en_iter, ddev) {
@@ -164,10 +165,10 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
 	state = drm_crtc_state_to_atmel_hlcdc_crtc_state(c->state);
 	cfg = state->output_mode << 8;
 
-	if (adj->flags & DRM_MODE_FLAG_NVSYNC)
+	if (!is_xlcdc && (adj->flags & DRM_MODE_FLAG_NVSYNC))
 		cfg |= ATMEL_HLCDC_VSPOL;
 
-	if (adj->flags & DRM_MODE_FLAG_NHSYNC)
+	if (!is_xlcdc && (adj->flags & DRM_MODE_FLAG_NHSYNC))
 		cfg |= ATMEL_HLCDC_HSPOL;
 
 	regmap_update_bits(regmap, ATMEL_HLCDC_CFG(5),
@@ -202,6 +203,20 @@ static void atmel_hlcdc_crtc_atomic_disable(struct drm_crtc *c,
 
 	pm_runtime_get_sync(dev->dev);
 
+	if (crtc->dc->desc->is_xlcdc) {
+		regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_CM);
+		if (regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+					     !(status & ATMEL_XLCDC_CM),
+					     10, 1000))
+			dev_warn(dev->dev, "Atmel LCDC status register CMSTS timeout\n");
+
+		regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_SD);
+		if (regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+					     status & ATMEL_XLCDC_SD,
+					     10, 1000))
+			dev_warn(dev->dev, "Atmel LCDC status register SDSTS timeout\n");
+	}
+
 	regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_DISP);
 	while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
 	       (status & ATMEL_HLCDC_DISP))
@@ -256,6 +271,20 @@ static void atmel_hlcdc_crtc_atomic_enable(struct drm_crtc *c,
 	       !(status & ATMEL_HLCDC_DISP))
 		cpu_relax();
 
+	if (crtc->dc->desc->is_xlcdc) {
+		regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_CM);
+		if (regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+					     status & ATMEL_XLCDC_CM,
+					     10, 1000))
+			dev_warn(dev->dev, "Atmel LCDC status register CMSTS timeout\n");
+
+		regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_SD);
+		if (regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+					     !(status & ATMEL_XLCDC_SD),
+					     10, 1000))
+			dev_warn(dev->dev, "Atmel LCDC status register SDSTS timeout\n");
+	}
+
 	pm_runtime_put_sync(dev->dev);
 
 }
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
index d30aec174aa2..7702c2f16178 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
@@ -30,6 +30,26 @@
 
 #define ATMEL_HLCDC_LAYER_IRQS_OFFSET		8
 
+static const struct atmel_lcdc_dc_ops  atmel_hlcdc_ops = {
+	.plane_setup_scaler = atmel_hlcdc_plane_setup_scaler,
+	.update_lcdc_buffers = update_hlcdc_buffers,
+	.lcdc_atomic_disable = hlcdc_atomic_disable,
+	.lcdc_update_general_settings = atmel_hlcdc_plane_update_general_settings,
+	.lcdc_atomic_update = hlcdc_atomic_update,
+	.lcdc_csc_init = hlcdc_csc_init,
+	.lcdc_irq_dbg = hlcdc_irq_dbg,
+};
+
+static const struct atmel_lcdc_dc_ops  atmel_xlcdc_ops = {
+	.plane_setup_scaler = atmel_xlcdc_plane_setup_scaler,
+	.update_lcdc_buffers = update_xlcdc_buffers,
+	.lcdc_atomic_disable = xlcdc_atomic_disable,
+	.lcdc_update_general_settings = atmel_xlcdc_plane_update_general_settings,
+	.lcdc_atomic_update = xlcdc_atomic_update,
+	.lcdc_csc_init = xlcdc_csc_init,
+	.lcdc_irq_dbg = xlcdc_irq_dbg,
+};
+
 static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9n12_layers[] = {
 	{
 		.name = "base",
@@ -58,6 +78,7 @@ static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_at91sam9n12 = {
 	.conflicting_output_formats = true,
 	.nlayers = ARRAY_SIZE(atmel_hlcdc_at91sam9n12_layers),
 	.layers = atmel_hlcdc_at91sam9n12_layers,
+	.ops = &atmel_hlcdc_ops,
 };
 
 static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
@@ -151,6 +172,7 @@ static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_at91sam9x5 = {
 	.conflicting_output_formats = true,
 	.nlayers = ARRAY_SIZE(atmel_hlcdc_at91sam9x5_layers),
 	.layers = atmel_hlcdc_at91sam9x5_layers,
+	.ops = &atmel_hlcdc_ops,
 };
 
 static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
@@ -269,6 +291,7 @@ static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sama5d3 = {
 	.conflicting_output_formats = true,
 	.nlayers = ARRAY_SIZE(atmel_hlcdc_sama5d3_layers),
 	.layers = atmel_hlcdc_sama5d3_layers,
+	.ops = &atmel_hlcdc_ops,
 };
 
 static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = {
@@ -364,6 +387,7 @@ static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sama5d4 = {
 	.max_hpw = 0x3ff,
 	.nlayers = ARRAY_SIZE(atmel_hlcdc_sama5d4_layers),
 	.layers = atmel_hlcdc_sama5d4_layers,
+	.ops = &atmel_hlcdc_ops,
 };
 
 static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sam9x60_layers[] = {
@@ -460,6 +484,7 @@ static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sam9x60 = {
 	.fixed_clksrc = true,
 	.nlayers = ARRAY_SIZE(atmel_hlcdc_sam9x60_layers),
 	.layers = atmel_hlcdc_sam9x60_layers,
+	.ops = &atmel_hlcdc_ops,
 };
 
 static const struct atmel_hlcdc_layer_desc atmel_xlcdc_sam9x75_layers[] = {
@@ -553,6 +578,7 @@ static const struct atmel_hlcdc_dc_desc atmel_xlcdc_dc_sam9x75 = {
 	.is_xlcdc = true,
 	.nlayers = ARRAY_SIZE(atmel_xlcdc_sam9x75_layers),
 	.layers = atmel_xlcdc_sam9x75_layers,
+	.ops = &atmel_xlcdc_ops,
 };
 
 static const struct of_device_id atmel_hlcdc_of_match[] = {
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
index daa508504f47..e2a5bed86fdb 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
@@ -282,7 +282,7 @@ atmel_hlcdc_plane_scaler_set_phicoeff(struct atmel_hlcdc_plane *plane,
 					    coeff_tab[i]);
 }
 
-static void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
+void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
 					   struct atmel_hlcdc_plane_state *state)
 {
 	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
@@ -330,11 +330,56 @@ static void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
 								     yfactor));
 }
 
+void atmel_xlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
+				    struct atmel_hlcdc_plane_state *state)
+{
+	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+	u32 xfactor, yfactor;
+
+	if (!desc->layout.scaler_config)
+		return;
+
+	if (state->crtc_w == state->src_w && state->crtc_h == state->src_h) {
+		atmel_hlcdc_layer_write_cfg(&plane->layer,
+					    desc->layout.scaler_config, 0);
+		return;
+	}
+
+	/* xfactor = round[(2^20 * XMEMSIZE)/XSIZE)] */
+	xfactor = (u32)(((1 << 20) * state->src_w) / state->crtc_w);
+
+	/* yfactor = round[(2^20 * YMEMSIZE)/YSIZE)] */
+	yfactor = (u32)(((1 << 20) * state->src_h) / state->crtc_h);
+
+	atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config,
+				    ATMEL_XLCDC_LAYER_VSCALER_LUMA_ENABLE |
+				    ATMEL_XLCDC_LAYER_VSCALER_CHROMA_ENABLE |
+				    ATMEL_XLCDC_LAYER_HSCALER_LUMA_ENABLE |
+				    ATMEL_XLCDC_LAYER_HSCALER_CHROMA_ENABLE);
+
+	atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 1,
+				    yfactor);
+	atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 3,
+				    xfactor);
+
+	/* As per YCbCr window resampling configuration */
+	if (state->base.fb->format->format == DRM_FORMAT_YUV420) {
+		yfactor /= 2;
+		xfactor /= 2;
+	} /* else As per ARGB window resampling configuration */
+
+	atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2,
+				    yfactor);
+	atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4,
+				    xfactor);
+}
+
 static void
 atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
 				      struct atmel_hlcdc_plane_state *state)
 {
 	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+	struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
 
 	if (desc->layout.size)
 		atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.size,
@@ -352,10 +397,10 @@ atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
 					ATMEL_HLCDC_LAYER_POS(state->crtc_x,
 							      state->crtc_y));
 
-	atmel_hlcdc_plane_setup_scaler(plane, state);
+	dc->desc->ops->plane_setup_scaler(plane, state);
 }
 
-static void
+void
 atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
 					struct atmel_hlcdc_plane_state *state)
 {
@@ -393,6 +438,40 @@ atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
 				    cfg);
 }
 
+void
+atmel_xlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
+					  struct atmel_hlcdc_plane_state *state)
+{
+	unsigned int cfg;
+	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+	const struct drm_format_info *format = state->base.fb->format;
+
+	atmel_hlcdc_layer_write_cfg(&plane->layer, ATMEL_XLCDC_LAYER_DMA_CFG,
+				    ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 | state->ahb_id);
+
+	cfg = ATMEL_XLCDC_LAYER_DMA | ATMEL_XLCDC_LAYER_REP;
+
+	if (plane->base.type != DRM_PLANE_TYPE_PRIMARY) {
+		/*
+		 * Alpha Blending bits specific to SAM9X7 SoC
+		 */
+		cfg |= ATMEL_XLCDC_LAYER_SFACTC_A0_MULT_AS |
+		       ATMEL_XLCDC_LAYER_SFACTA_ONE |
+		       ATMEL_XLCDC_LAYER_DFACTC_M_A0_MULT_AS |
+		       ATMEL_XLCDC_LAYER_DFACTA_ONE;
+		if (format->has_alpha)
+			cfg |= ATMEL_XLCDC_LAYER_A0(0xff);
+		else
+			cfg |= ATMEL_XLCDC_LAYER_A0(state->base.alpha);
+	}
+
+	if (state->disc_h && state->disc_w)
+		cfg |= ATMEL_XLCDC_LAYER_DISCEN;
+
+	atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.general_config,
+				    cfg);
+}
+
 static void atmel_hlcdc_plane_update_format(struct atmel_hlcdc_plane *plane,
 					struct atmel_hlcdc_plane_state *state)
 {
@@ -437,36 +516,53 @@ static void atmel_hlcdc_plane_update_clut(struct atmel_hlcdc_plane *plane,
 	}
 }
 
+void update_hlcdc_buffers(struct atmel_hlcdc_plane *plane,
+			  struct atmel_hlcdc_plane_state *state, u32 sr, int i)
+{
+	atmel_hlcdc_layer_write_reg(&plane->layer,
+				    ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
+				    state->dscrs[i]->self);
+
+	if (sr & ATMEL_HLCDC_LAYER_EN)
+		return;
+	atmel_hlcdc_layer_write_reg(&plane->layer,
+				    ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
+				    state->dscrs[i]->addr);
+	atmel_hlcdc_layer_write_reg(&plane->layer,
+				    ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
+				    state->dscrs[i]->ctrl);
+	atmel_hlcdc_layer_write_reg(&plane->layer,
+				    ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
+				    state->dscrs[i]->self);
+}
+
+void update_xlcdc_buffers(struct atmel_hlcdc_plane *plane,
+			  struct atmel_hlcdc_plane_state *state,
+			  u32 sr, int i)
+{
+	atmel_hlcdc_layer_write_reg(&plane->layer,
+				    ATMEL_XLCDC_LAYER_PLANE_ADDR(i),
+				    state->dscrs[i]->addr);
+}
+
 static void atmel_hlcdc_plane_update_buffers(struct atmel_hlcdc_plane *plane,
-					struct atmel_hlcdc_plane_state *state)
+					     struct atmel_hlcdc_plane_state *state)
 {
 	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+	struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
 	struct drm_framebuffer *fb = state->base.fb;
 	u32 sr;
 	int i;
 
-	sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
+	if (!dc->desc->is_xlcdc)
+		sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
 
 	for (i = 0; i < state->nplanes; i++) {
 		struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i);
 
 		state->dscrs[i]->addr = gem->dma_addr + state->offsets[i];
 
-		atmel_hlcdc_layer_write_reg(&plane->layer,
-					    ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
-					    state->dscrs[i]->self);
-
-		if (!(sr & ATMEL_HLCDC_LAYER_EN)) {
-			atmel_hlcdc_layer_write_reg(&plane->layer,
-					ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
-					state->dscrs[i]->addr);
-			atmel_hlcdc_layer_write_reg(&plane->layer,
-					ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
-					state->dscrs[i]->ctrl);
-			atmel_hlcdc_layer_write_reg(&plane->layer,
-					ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
-					state->dscrs[i]->self);
-		}
+		dc->desc->ops->update_lcdc_buffers(plane, state, sr, i);
 
 		if (desc->layout.xstride[i])
 			atmel_hlcdc_layer_write_cfg(&plane->layer,
@@ -712,11 +808,8 @@ static int atmel_hlcdc_plane_atomic_check(struct drm_plane *p,
 	return 0;
 }
 
-static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
-					     struct drm_atomic_state *state)
+void hlcdc_atomic_disable(struct atmel_hlcdc_plane *plane)
 {
-	struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
-
 	/* Disable interrupts */
 	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IDR,
 				    0xffffffff);
@@ -731,6 +824,70 @@ static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
 	atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
 }
 
+void xlcdc_atomic_disable(struct atmel_hlcdc_plane *plane)
+{
+	/* Disable interrupts */
+	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IDR,
+				    0xffffffff);
+
+	/* Disable the layer */
+	atmel_hlcdc_layer_write_reg(&plane->layer,
+				    ATMEL_XLCDC_LAYER_ENR, 0);
+
+	/* Clear all pending interrupts */
+	atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
+}
+
+static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
+					     struct drm_atomic_state *state)
+{
+	struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
+	struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
+
+	dc->desc->ops->lcdc_atomic_disable(plane);
+}
+
+void hlcdc_atomic_update(struct atmel_hlcdc_plane *plane,
+			 struct atmel_hlcdc_dc *dc)
+{
+	u32 sr;
+
+	/* Enable the overrun interrupts. */
+	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
+				    ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
+				    ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
+				    ATMEL_HLCDC_LAYER_OVR_IRQ(2));
+
+	/* Apply the new config at the next SOF event. */
+	sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
+	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
+				    ATMEL_HLCDC_LAYER_UPDATE |
+				    (sr & ATMEL_HLCDC_LAYER_EN ?
+				    ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
+}
+
+void xlcdc_atomic_update(struct atmel_hlcdc_plane *plane,
+			 struct atmel_hlcdc_dc *dc)
+{
+	/* Enable the overrun interrupts. */
+	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IER,
+				    ATMEL_XLCDC_LAYER_OVR_IRQ(0) |
+				    ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
+				    ATMEL_XLCDC_LAYER_OVR_IRQ(2));
+
+	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_ENR,
+				    ATMEL_XLCDC_LAYER_EN);
+
+	/*
+	 * Updating XLCDC_xxxCFGx, XLCDC_xxxFBA and XLCDC_xxxEN,
+	 * (where xxx indicates each layer) requires writing one to the
+	 * Update Attribute field for each layer in LCDC_ATTRE register for SAM9X7.
+	 */
+	regmap_write(dc->hlcdc->regmap, ATMEL_XLCDC_ATTRE, ATMEL_XLCDC_BASE_UPDATE |
+		     ATMEL_XLCDC_OVR1_UPDATE | ATMEL_XLCDC_OVR3_UPDATE |
+		     ATMEL_XLCDC_HEO_UPDATE);
+}
+
 static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
 					    struct drm_atomic_state *state)
 {
@@ -739,7 +896,7 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
 	struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
 	struct atmel_hlcdc_plane_state *hstate =
 			drm_plane_state_to_atmel_hlcdc_plane_state(new_s);
-	u32 sr;
+	struct atmel_hlcdc_dc *dc = p->dev->dev_private;
 
 	if (!new_s->crtc || !new_s->fb)
 		return;
@@ -750,29 +907,63 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
 	}
 
 	atmel_hlcdc_plane_update_pos_and_size(plane, hstate);
-	atmel_hlcdc_plane_update_general_settings(plane, hstate);
+	dc->desc->ops->lcdc_update_general_settings(plane, hstate);
 	atmel_hlcdc_plane_update_format(plane, hstate);
 	atmel_hlcdc_plane_update_clut(plane, hstate);
 	atmel_hlcdc_plane_update_buffers(plane, hstate);
 	atmel_hlcdc_plane_update_disc_area(plane, hstate);
 
-	/* Enable the overrun interrupts. */
-	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
-				    ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
-				    ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
-				    ATMEL_HLCDC_LAYER_OVR_IRQ(2));
+	dc->desc->ops->lcdc_atomic_update(plane, dc);
+}
 
-	/* Apply the new config at the next SOF event. */
-	sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
-	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
-			ATMEL_HLCDC_LAYER_UPDATE |
-			(sr & ATMEL_HLCDC_LAYER_EN ?
-			 ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
+void hlcdc_csc_init(struct atmel_hlcdc_plane *plane,
+		    const struct atmel_hlcdc_layer_desc *desc)
+{
+	/*
+	 * TODO: declare a "yuv-to-rgb-conv-factors" property to let
+	 * userspace modify these factors (using a BLOB property ?).
+	 */
+	static u32 hlcdc_csc_coeffs[] = {
+		0x4c900091,
+		0x7a5f5090,
+		0x40040890
+	};
+
+	for (int i = 0; i < ARRAY_SIZE(hlcdc_csc_coeffs); i++) {
+		atmel_hlcdc_layer_write_cfg(&plane->layer,
+					    desc->layout.csc + i,
+					    hlcdc_csc_coeffs[i]);
+	}
+}
+
+void xlcdc_csc_init(struct atmel_hlcdc_plane *plane,
+		    const struct atmel_hlcdc_layer_desc *desc)
+{
+	/*
+	 * yuv-to-rgb-conv-factors are now defined from LCDC_HEOCFG16 to
+	 * LCDC_HEOCFG21 registers in SAM9X7.
+	 */
+	static u32 xlcdc_csc_coeffs[] = {
+		0x00000488,
+		0x00000648,
+		0x1EA00480,
+		0x00001D28,
+		0x08100480,
+		0x00000000,
+		0x00000007
+	};
+
+	for (int i = 0; i < ARRAY_SIZE(xlcdc_csc_coeffs); i++) {
+		atmel_hlcdc_layer_write_cfg(&plane->layer,
+					    desc->layout.csc + i,
+					    xlcdc_csc_coeffs[i]);
+	}
 }
 
 static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
 {
 	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+	struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
 
 	if (desc->type == ATMEL_HLCDC_OVERLAY_LAYER ||
 	    desc->type == ATMEL_HLCDC_CURSOR_LAYER) {
@@ -796,31 +987,16 @@ static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
 			return ret;
 	}
 
-	if (desc->layout.csc) {
-		/*
-		 * TODO: decare a "yuv-to-rgb-conv-factors" property to let
-		 * userspace modify these factors (using a BLOB property ?).
-		 */
-		atmel_hlcdc_layer_write_cfg(&plane->layer,
-					    desc->layout.csc,
-					    0x4c900091);
-		atmel_hlcdc_layer_write_cfg(&plane->layer,
-					    desc->layout.csc + 1,
-					    0x7a5f5090);
-		atmel_hlcdc_layer_write_cfg(&plane->layer,
-					    desc->layout.csc + 2,
-					    0x40040890);
-	}
+	if (desc->layout.csc)
+		dc->desc->ops->lcdc_csc_init(plane, desc);
 
 	return 0;
 }
 
-void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
+void hlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
+		   const struct atmel_hlcdc_layer_desc *desc)
 {
-	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
-	u32 isr;
-
-	isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
+	u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
 
 	/*
 	 * There's not much we can do in case of overrun except informing
@@ -830,8 +1006,31 @@ void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
 	if (isr &
 	    (ATMEL_HLCDC_LAYER_OVR_IRQ(0) | ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
 	     ATMEL_HLCDC_LAYER_OVR_IRQ(2)))
-		dev_dbg(plane->base.dev->dev, "overrun on plane %s\n",
-			desc->name);
+		dev_warn(plane->base.dev->dev, "overrun on plane %s\n", desc->name);
+}
+
+void xlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
+		   const struct atmel_hlcdc_layer_desc *desc)
+{
+	u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
+
+	/*
+	 * There's not much we can do in case of overrun except informing
+	 * the user. However, we are in interrupt context here, hence the
+	 * use of dev_dbg().
+	 */
+	if (isr &
+	    (ATMEL_XLCDC_LAYER_OVR_IRQ(0) | ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
+	     ATMEL_XLCDC_LAYER_OVR_IRQ(2)))
+		dev_warn(plane->base.dev->dev, "overrun on plane %s\n", desc->name);
+}
+
+void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
+{
+	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+	struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
+
+	dc->desc->ops->lcdc_irq_dbg(plane, desc);
 }
 
 static const struct drm_plane_helper_funcs atmel_hlcdc_layer_plane_helper_funcs = {
-- 
2.25.1