Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757140AbXKGP4X (ORCPT ); Wed, 7 Nov 2007 10:56:23 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754083AbXKGP4N (ORCPT ); Wed, 7 Nov 2007 10:56:13 -0500 Received: from quoll.daa.com.au ([203.17.251.1]:52459 "EHLO quoll.daa.com.au" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754060AbXKGP4M (ORCPT ); Wed, 7 Nov 2007 10:56:12 -0500 X-Greylist: delayed 1980 seconds by postgrey-1.27 at vger.kernel.org; Wed, 07 Nov 2007 10:56:12 EST Message-ID: <4731D85E.70201@daa.com.au> Date: Thu, 08 Nov 2007 00:23:10 +0900 From: James Andrewartha Organization: Data Analysis Australia User-Agent: Thunderbird 2.0.0.6 (Windows/20070728) MIME-Version: 1.0 To: Denys Fedoryshchenko CC: Andrew Morton , linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, alan@lxorguk.ukuu.org.uk, htejun@gmail.com Subject: Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10 References: <20071101213013.M54162@visp.net.lb> <20071106221521.4f64a066.akpm@linux-foundation.org> <20071107132630.M65286@visp.net.lb> In-Reply-To: <20071107132630.M65286@visp.net.lb> Content-Type: text/plain; charset=KOI8-R Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7484 Lines: 175 Denys Fedoryshchenko wrote: > On Tue, 6 Nov 2007 22:15:21 -0800, Andrew Morton wrote >>> On Thu, 1 Nov 2007 23:30:13 +0200 "Denys" wrote: >>> Finally i got full DMESG with 1GB card till end. Seems not readable too. >>> scsi0 : sc1200 >>> scsi1 : sc1200 >>> ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 >>> ata2: DUMMY >>> ata1.00: CFA: SanDisk SDCFH-1024, HDX 3.07, max MWDMA2 >>> ata1.00: 2001888 sectors, multi 0: LBA >>> ata1.00: configured for MWDMA2 >>> scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFH-10 HDX PQ: 0 > ANSI: 5 >>> sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB) >>> sd 0:0:0:0: [sda] Write Protect is off >>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support >>> DPO or FUA >>> sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB) >>> sd 0:0:0:0: [sda] Write Protect is off >>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support >>> DPO or FUA >>> sda:<4>Clocksource tsc unstable (delta = -334501841 ns) >>> Time: pit clocksource has been installed. >>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 > in >>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >>> ata1.00: status: { DRDY } >>> ata1: soft resetting link >>> ata1.00: configured for MWDMA2 >>> ata1: EH complete >>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 > in >>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >>> ata1.00: status: { DRDY } >>> ata1: soft resetting link >>> ata1.00: configured for MWDMA2 >>> ata1: EH complete >>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 > in >>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >>> ata1.00: status: { DRDY } >>> ata1: soft resetting link >>> ata1.00: configured for MWDMA2 >>> ata1: EH complete >>> ata1.00: limiting speed to MWDMA1:PIO4 >>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 > in >>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >>> ata1.00: status: { DRDY } >>> ata1: soft resetting link >>> ata1.00: configured for MWDMA1 >>> ata1: EH complete >>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 > in >>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >>> ata1.00: status: { DRDY } >>> ata1: soft resetting link >>> ata1.00: configured for MWDMA1 >>> ata1: EH complete >>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 > in >>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >>> ata1.00: status: { DRDY } >>> ata1: soft resetting link >>> ata1.00: configured for MWDMA1 >>> sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 >>> sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] >>> Descriptor sense data with sense descriptors (in hex): >>> 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 >>> 00 00 00 00 >>> sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0 >>> end_request: I/O error, dev sda, sector 0 >>> Buffer I/O error on device sda, logical block 0 >>> ata1: EH complete >>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 > in >>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >>> ata1.00: status: { DRDY } >>> ata1: soft resetting link >>> ata1.00: configured for MWDMA1 >>> ata1: EH complete >>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 > in >>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >>> ata1.00: status: { DRDY } >>> ata1: soft resetting link >>> ata1.00: configured for MWDMA1 >>> ata1: EH complete >>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 > in >>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >>> ata1.00: status: { DRDY } >>> ata1: soft resetting link >>> ata1.00: configured for MWDMA1 >>> ata1: EH complete >>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 > in >>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >>> ata1.00: status: { DRDY } >>> ata1: soft resetting link >>> ata1.00: configured for MWDMA1 >>> ata1: EH complete >>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 > in >>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >>> ata1.00: status: { DRDY } >>> ata1: soft resetting link >>> ata1.00: configured for MWDMA1 >>> ata1: EH complete >>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 > in >>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >>> ata1.00: status: { DRDY } >>> ata1: soft resetting link >>> ata1.00: configured for MWDMA1 >>> sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 >>> sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] >>> Descriptor sense data with sense descriptors (in hex): >>> 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 >>> 00 00 00 00 >>> sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0 >>> end_request: I/O error, dev sda, sector 0 >>> Buffer I/O error on device sda, logical block 0 >>> ata1: EH complete >>> unable to read partition table >>> sd 0:0:0:0: [sda] Attached SCSI removable disk >>> scx200_wdt: timer margin 60 seconds >>> cpuidle: using governor ladder >>> enabling scx200 high-res timer (1 MHz +0 ppm) >>> TCP cubic registered >>> Time: scx200_hrt clocksource has been installed. >>> NET: Registered protocol family 1 >>> NET: Registered protocol family 17 >>> Using IPI Shortcut mode >>> VFS: Cannot open root device "" or unknown-block(8,18) >>> Please append a correct "root=" boot option; here are the available >>> partitions: >>> 0800 1000944 sda driver: sd >>> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown- >>> block(8,18) >>> >> (+linux-ide) (+alan, tejun) >> So this has never worked on any known kernel? > > It is working now on old ide code (not libata). Can you post the dmesg and hdparm -I of a working boot using the old ide code? The thing that stuck out to me (as just a reader of linux-ide) was that the problem involves MWDMA and CF, which have had problems (although not the same as this one) in the past: http://thread.gmane.org/gmane.linux.ide/22058 and http://thread.gmane.org/gmane.linux.ide/22400 -- James Andrewartha - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/