Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) client-ip=2620:137:e000::3:2;
MIME-Version: 1.0
References: <20230915121504.806672-1-quic_srichara@quicinc.com> <20230915121504.806672-4-quic_srichara@quicinc.com>
In-Reply-To: <20230915121504.806672-4-quic_srichara@quicinc.com>
From:   Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date:   Fri, 15 Sep 2023 21:44:57 +0300
Message-ID: <CAA8EJpqJaY3ocZYMxWyDhzoCvCrn6d-YyD=jtumAM7aXe_DEdg@mail.gmail.com>
Subject: Re: [PATCH V2 3/4] thermal/drivers/tsens: Add support for IPQ5018 tsens
To:     Sricharan Ramabadhran <quic_srichara@quicinc.com>
Cc:     krzysztof.kozlowski@linaro.org, agross@kernel.org,
        andersson@kernel.org, konrad.dybcio@linaro.org,
        srinivas.kandagatla@linaro.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
        thara.gopinath@gmail.com, rafael@kernel.org,
        daniel.lezcano@linaro.org, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-pm@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

On Fri, 15 Sept 2023 at 15:16, Sricharan Ramabadhran
<quic_srichara@quicinc.com> wrote:
>
> IPQ5018 has tsens IP V1.0, 4 sensors and 1 interrupt.
> The soc does not have a RPM, hence tsens has to be reset and
> enabled in the driver init. Adding the driver support for same.
>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> ---
>  [v2] Used tsens_calibrate_common instead of legacy
>       and addressed comments from Dmitry.
>
>  drivers/thermal/qcom/tsens-v1.c | 58 +++++++++++++++++++++++++++++++++
>  drivers/thermal/qcom/tsens.c    |  3 ++
>  drivers/thermal/qcom/tsens.h    |  2 +-
>  3 files changed, 62 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
> index dc1c4ae2d8b0..ed5c017905ab 100644
> --- a/drivers/thermal/qcom/tsens-v1.c
> +++ b/drivers/thermal/qcom/tsens-v1.c
> @@ -79,6 +79,18 @@ static struct tsens_features tsens_v1_feat = {
>         .trip_max_temp  = 120000,
>  };
>
> +static struct tsens_features tsens_v1_ipq5018_feat = {
> +       .ver_major      = VER_1_X,
> +       .crit_int       = 0,
> +       .combo_int      = 0,
> +       .adc            = 1,
> +       .srot_split     = 1,
> +       .max_sensors    = 11,
> +       .trip_min_temp  = -40000,
> +       .trip_max_temp  = 120000,
> +       .ignore_enable  = 1,
> +};
> +
>  static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
>         /* ----- SROT ------ */
>         /* VERSION */
> @@ -150,6 +162,39 @@ static int __init init_8956(struct tsens_priv *priv) {
>         return init_common(priv);
>  }
>
> +static int init_ipq5018(struct tsens_priv *priv)
> +{
> +       int ret;
> +       u32 mask;
> +
> +       init_common(priv);

Please take care of init_common()'s return code. Don't continue init
if init_common() fails.

> +       if (!priv->tm_map)
> +               return -ENODEV;

Why?

> +
> +       ret = regmap_field_write(priv->rf[TSENS_SW_RST], 1);
> +       if (ret) {
> +               dev_err(priv->dev, "Reset failed\n");
> +               return ret;
> +       }
> +
> +       mask = GENMASK(priv->num_sensors, 0);
> +       ret = regmap_field_update_bits(priv->rf[SENSOR_EN], mask, mask);
> +       if (ret) {
> +               dev_err(priv->dev, "Sensor Enable failed\n");
> +               return ret;
> +       }
> +
> +       ret = regmap_field_write(priv->rf[TSENS_EN], 1);
> +       if (ret) {
> +               dev_err(priv->dev, "Enable failed\n");
> +               return ret;
> +       }
> +
> +       ret = regmap_field_write(priv->rf[TSENS_SW_RST], 0);
> +
> +       return ret;
> +}
> +
>  static const struct tsens_ops ops_generic_v1 = {
>         .init           = init_common,
>         .calibrate      = calibrate_v1,
> @@ -187,3 +232,16 @@ struct tsens_plat_data data_8976 = {
>         .feat           = &tsens_v1_feat,
>         .fields         = tsens_v1_regfields,
>  };
> +
> +const struct tsens_ops ops_ipq5018 = {
> +       .init           = init_ipq5018,
> +       .calibrate      = tsens_calibrate_common,
> +       .get_temp       = get_temp_tsens_valid,
> +};
> +
> +struct tsens_plat_data data_ipq5018 = {
> +       .num_sensors    = 5,
> +       .ops            = &ops_ipq5018,
> +       .feat           = &tsens_v1_ipq5018_feat,
> +       .fields         = tsens_v1_regfields,
> +};
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 0a43ccf02ec4..c792b9dc6676 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -1101,6 +1101,9 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
>
>  static const struct of_device_id tsens_table[] = {
>         {
> +               .compatible = "qcom,ipq5018-tsens",
> +               .data = &data_ipq5018,
> +       }, {
>                 .compatible = "qcom,ipq8064-tsens",
>                 .data = &data_8960,
>         }, {
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> index e254cd2df904..b6594b546d11 100644
> --- a/drivers/thermal/qcom/tsens.h
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -645,7 +645,7 @@ extern struct tsens_plat_data data_8960;
>  extern struct tsens_plat_data data_8226, data_8909, data_8916, data_8939, data_8974, data_9607;
>
>  /* TSENS v1 targets */
> -extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
> +extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956, data_ipq5018;
>
>  /* TSENS v2 targets */
>  extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;
> --
> 2.34.1
>


-- 
With best wishes
Dmitry