Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) client-ip=2620:137:e000::3:7;
From:   charles.kearney@hpe.com
To:     charles.kearney@hpe.com, verdun@hpe.com, nick.hawkins@hpe.com,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        conor+dt@kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v1 1/1] ARM: dts: hpe: BUG: Correct GXP register ranges
Date:   Fri, 15 Sep 2023 16:54:36 +0000
Message-Id: <20230915165436.3118284-2-charles.kearney@hpe.com>
In-Reply-To: <20230915165436.3118284-1-charles.kearney@hpe.com>
References: <20230915165436.3118284-1-charles.kearney@hpe.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Charles Kearney <charles.kearney@hpe.com>

Bug fix to correct memory ranges on GXP to include host registers. This
corrects a issue where the host interrupt controller is not available.

Signed-off-by: Charles Kearney <charles.kearney@hpe.com>
---
 arch/arm/boot/dts/hpe/hpe-gxp.dtsi | 39 +++++++++++++++---------------
 1 file changed, 20 insertions(+), 19 deletions(-)

diff --git a/arch/arm/boot/dts/hpe/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe/hpe-gxp.dtsi
index cf735b3c4f35..18230a4754a6 100644
--- a/arch/arm/boot/dts/hpe/hpe-gxp.dtsi
+++ b/arch/arm/boot/dts/hpe/hpe-gxp.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree file for HPE GXP
+ * Device Tree for HPE
  */
 
 /dts-v1/;
@@ -52,73 +52,74 @@ L2: cache-controller@b0040000 {
 			cache-level = <2>;
 		};
 
-		ahb@c0000000 {
+		ahb@80000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x0 0xc0000000 0x30000000>;
 			dma-ranges;
+			ranges = <0x0 0x80000000 0x20000000>,
+			<0x40000000 0xc0000000 0x3fff0000>;
 
-			vic0: interrupt-controller@eff0000 {
+			vic0: interrupt-controller@4eff0000 {
 				compatible = "arm,pl192-vic";
-				reg = <0xeff0000 0x1000>;
+				reg = <0x4eff0000 0x1000>;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
 
-			vic1: interrupt-controller@80f00000 {
+			vic1: interrupt-controller@f00000 {
 				compatible = "arm,pl192-vic";
-				reg = <0x80f00000 0x1000>;
+				reg = <0xf00000 0x1000>;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
 
-			uarta: serial@e0 {
+			uarta: serial@400000e0 {
 				compatible = "ns16550a";
-				reg = <0xe0 0x8>;
+				reg = <0x400000e0 0x8>;
 				interrupts = <17>;
 				interrupt-parent = <&vic0>;
 				clock-frequency = <1846153>;
 				reg-shift = <0>;
 			};
 
-			uartb: serial@e8 {
+			uartb: serial@400000e8 {
 				compatible = "ns16550a";
-				reg = <0xe8 0x8>;
+				reg = <0x400000e8 0x8>;
 				interrupts = <18>;
 				interrupt-parent = <&vic0>;
 				clock-frequency = <1846153>;
 				reg-shift = <0>;
 			};
 
-			uartc: serial@f0 {
+			uartc: serial@400000f0 {
 				compatible = "ns16550a";
-				reg = <0xf0 0x8>;
+				reg = <0x400000f0 0x8>;
 				interrupts = <19>;
 				interrupt-parent = <&vic0>;
 				clock-frequency = <1846153>;
 				reg-shift = <0>;
 			};
 
-			usb0: usb@efe0000 {
+			usb0: usb@4efe0000 {
 				compatible = "hpe,gxp-ehci", "generic-ehci";
-				reg = <0xefe0000 0x100>;
+				reg = <0x4efe0000 0x100>;
 				interrupts = <7>;
 				interrupt-parent = <&vic0>;
 			};
 
-			st: timer@80 {
+			st: timer@40000080 {
 				compatible = "hpe,gxp-timer";
-				reg = <0x80 0x16>;
+				reg = <0x40000080 0x16>;
 				interrupts = <0>;
 				interrupt-parent = <&vic0>;
 				clocks = <&iopclk>;
 				clock-names = "iop";
 			};
 
-			usb1: usb@efe0100 {
+			usb1: usb@4efe0100 {
 				compatible = "hpe,gxp-ohci", "generic-ohci";
-				reg = <0xefe0100 0x110>;
+				reg = <0x4efe0100 0x110>;
 				interrupts = <6>;
 				interrupt-parent = <&vic0>;
 			};
-- 
2.25.1