Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758347AbXKHACN (ORCPT ); Wed, 7 Nov 2007 19:02:13 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752605AbXKHAB6 (ORCPT ); Wed, 7 Nov 2007 19:01:58 -0500 Received: from usermail.globalproof.net ([194.146.153.18]:44287 "EHLO usermail.globalproof.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752143AbXKHAB4 (ORCPT ); Wed, 7 Nov 2007 19:01:56 -0500 From: "Denys Fedoryshchenko" To: Jeff Garzik , Mark Lord Cc: James Andrewartha , Andrew Morton , linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, alan@lxorguk.ukuu.org.uk, htejun@gmail.com Subject: Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10 Date: Thu, 8 Nov 2007 02:01:44 +0200 Message-Id: <20071107235548.M95675@visp.net.lb> In-Reply-To: <20071107232045.GA26706@havoc.gtf.org> References: <20071101213013.M54162@visp.net.lb> <20071106221521.4f64a066.akpm@linux-foundation.org> <20071107132630.M65286@visp.net.lb> <4731D85E.70201@daa.com.au> <20071107160426.M31617@visp.net.lb> <47320E37.8010106@rtr.ca> <20071107232045.GA26706@havoc.gtf.org> X-Mailer: OpenWebMail 2.52 20060502 X-OriginatingIP: 195.69.208.251 (denys@visp.net.lb) MIME-Version: 1.0 Content-Type: text/plain; charset=koi8-r Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3583 Lines: 92 2.6.24-rc2 not working very well dmesg [ 12.386395] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 12.405579] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 12.430441] SC1200: IDE controller (0x100b:0x0502 rev 0x01) at PCI slot 0000:00:12.2 [ 12.454070] SC1200: not 100% native mode: will probe irqs later [ 12.471947] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio [ 12.493873] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio [ 12.515810] Probing IDE interface ide0... [ 12.528810] Clocksource tsc unstable (delta = -497423729 ns) [ 12.545888] Time: pit clocksource has been installed. [ 12.563379] hda: SanDisk SDCFH-1024, CFA DISK drive [ 12.578340] hda: applying conservative PIO "downgrade" [ 12.593869] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO1 [ 12.594006] hda: MW DMA 2 mode selected [ 12.594297] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 12.608778] Probing IDE interface ide1... [ 12.623192] hda: max request size: 128KiB [ 12.635322] hda: 2001888 sectors (1024 MB) w/1KiB Cache, CHS=1986/16/63, DMA [ 12.657134] hda:<4>hda: dma_timer_expiry: dma status == 0x21 [ 12.865846] hda: DMA timeout error [ 12.876092] ide_dma_end dma_stat=21 err=1 newerr=0 [ 12.890753] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } [ 12.914977] ide: failed opcode was: unknown [ 12.927743] hda: DMA disabled [ 12.937035] ide0: reset: success [ 12.948324] hda1 Mounting taking long time on 1GB card cause of DMA issues. In dmesg i am not sure about timestamp showing few seconds, in real life it took about 2 minutes. after that in dmesg [ 14.965070] hda: dma_timer_expiry: dma status == 0x21 [ 15.107909] hda: DMA timeout error [ 15.118149] ide_dma_end dma_stat=21 err=1 newerr=0 [ 15.132809] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } [ 15.157035] ide: failed opcode was: unknown [ 15.169799] hda: DMA disabled [ 15.178797] ide0: reset: success [ 15.312698] hda: dma_timer_expiry: dma status == 0x21 [ 15.650705] hda: DMA timeout error [ 15.660952] ide_dma_end dma_stat=21 err=1 newerr=0 [ 15.675614] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } [ 15.699836] ide: failed opcode was: unknown [ 15.712601] hda: DMA disabled [ 15.721603] ide0: reset: success [ 16.325999] hda: dma_timer_expiry: dma status == 0x21 [ 16.565756] hda: DMA timeout error [ 16.576001] ide_dma_end dma_stat=21 err=1 newerr=0 [ 16.590661] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } [ 16.614886] ide: failed opcode was: unknown [ 16.627651] hda: DMA disabled [ 16.636659] ide0: reset: success [ 16.650061] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended On Wed, 7 Nov 2007 18:20:45 -0500, Jeff Garzik wrote > On Wed, Nov 07, 2007 at 02:12:55PM -0500, Mark Lord wrote: > > That cannot be correct (??). Is this with hdparm-7.7 (latest sourceforge) > > ?? > > Can you show us the "hdparm --Istdout" output as well, please. > > If this is applicable... FWIW hdparm was only recently (in past <72 > hours) updated from 6.9 to 7.7 in Fedora... > > Jeff -- Denys Fedoryshchenko Technical Manager Virtual ISP S.A.L. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/