Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.35 as permitted sender) client-ip=23.128.96.35;
From:   Bhavya Kapoor <b-kapoor@ti.com>
To:     <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
CC:     <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
        <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <conor+dt@kernel.org>, <linux-arm-kernel@lists.infradead.org>,
        <a-govindraju@ti.com>, <kishon@ti.com>, <b-kapoor@ti.com>,
        <u-kumar1@ti.com>
Subject: [PATCH v3] arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode
Date:   Wed, 20 Sep 2023 15:11:30 +0530
Message-ID: <20230920094130.20279-1-b-kapoor@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

According to TRM for J721S2, SDR104 speed mode is supported by the SoC
but its capabilities were masked in device tree. Remove sdhci-caps-mask
to enable support for SDR104 speed mode for SD card in J721S2 SoC. Also
add itap delay select value for DDR50 High Speed Mode.

[+] Refer to : section 12.3.6.1.1 MMCSD Features, in J721S2 TRM
- https://www.ti.com/lit/zip/spruj28

Fixes: b8545f9d3a54 ("arm64: dts: ti: Add initial support for J721S2 SoC")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
---

Changelog v2->v3:
 - Add Itap Delay Select value for DDR50 SD High Speed Mode

Link to v2 patch : https://lore.kernel.org/all/20230412121415.860447-1-b-kapoor@ti.com/

 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 084f8f5b6699..a5ab301b14f1 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -766,11 +766,10 @@ main_sdhci1: mmc@4fb0000 {
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
-		/* Masking support for SDR104 capability */
-		sdhci-caps-mask = <0x00000003 0x00000000>;
 		status = "disabled";
 	};
 
-- 
2.39.2