Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760773AbXKIXUm (ORCPT ); Fri, 9 Nov 2007 18:20:42 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1756882AbXKIXTR (ORCPT ); Fri, 9 Nov 2007 18:19:17 -0500 Received: from pasmtpb.tele.dk ([80.160.77.98]:51338 "EHLO pasmtpB.tele.dk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753668AbXKIXTH (ORCPT ); Fri, 9 Nov 2007 18:19:07 -0500 From: Sam Ravnborg To: lkml Cc: Sam Ravnborg Subject: [PATCH 03/11] x86: arch/x86/Kconfig.cpu unification Date: Sat, 10 Nov 2007 00:20:37 +0100 Message-Id: <11946504462122-git-send-email-sam@ravnborg.org> X-Mailer: git-send-email 1.5.0.6 In-Reply-To: <20071109230812.GA5176@uranus.ravnborg.org> References: <20071109230812.GA5176@uranus.ravnborg.org> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13713 Lines: 517 Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk incorporated. Signed-off-by: Sam Ravnborg Cc: Adrian Bunk Cc: Brian Gerst --- arch/x86/Kconfig | 19 +++++++ arch/x86/Kconfig.cpu | 121 ++++++++++++++++++++++++++++----------------- arch/x86/Kconfig.x86_64 | 83 +------------------------------- arch/x86/boot/cpucheck.c | 6 -- 4 files changed, 95 insertions(+), 134 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index d1382c5..e741fc7 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1,3 +1,22 @@ +# x86 configuration + +### Arch settings +config RWSEM_GENERIC_SPINLOCK + def_bool !X86_XADD + +config RWSEM_XCHGADD_ALGORITHM + def_bool X86_XADD + +config ARCH_HAS_ILOG2_U32 + def_bool n + +config ARCH_HAS_ILOG2_U64 + def_bool n + +config GENERIC_CALIBRATE_DELAY + def_bool y + + menu "Power management options" depends on !X86_VOYAGER diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 0e2adad..c301622 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -3,11 +3,12 @@ if !X86_ELAN choice prompt "Processor family" - default M686 + default M686 if X86_32 + default GENERIC_CPU if X86_64 config M386 bool "386" - depends on !UML + depends on X86_32 && !UML ---help--- This is the processor type of your CPU. This information is used for optimizing purposes. In order to compile a kernel that can run on @@ -49,6 +50,7 @@ config M386 config M486 bool "486" + depends on X86_32 help Select this for a 486 series processor, either Intel or one of the compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX, @@ -57,6 +59,7 @@ config M486 config M586 bool "586/K5/5x86/6x86/6x86MX" + depends on X86_32 help Select this for an 586 or 686 series processor such as the AMD K5, the Cyrix 5x86, 6x86 and 6x86MX. This choice does not @@ -64,18 +67,21 @@ config M586 config M586TSC bool "Pentium-Classic" + depends on X86_32 help Select this for a Pentium Classic processor with the RDTSC (Read Time Stamp Counter) instruction for benchmarking. config M586MMX bool "Pentium-MMX" + depends on X86_32 help Select this for a Pentium with the MMX graphics/multimedia extended instructions. config M686 bool "Pentium-Pro" + depends on X86_32 help Select this for Intel Pentium Pro chips. This enables the use of Pentium Pro extended instructions, and disables the init-time guard @@ -83,6 +89,7 @@ config M686 config MPENTIUMII bool "Pentium-II/Celeron(pre-Coppermine)" + depends on X86_32 help Select this for Intel chips based on the Pentium-II and pre-Coppermine Celeron core. This option enables an unaligned @@ -92,6 +99,7 @@ config MPENTIUMII config MPENTIUMIII bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon" + depends on X86_32 help Select this for Intel chips based on the Pentium-III and Celeron-Coppermine core. This option enables use of some @@ -100,19 +108,14 @@ config MPENTIUMIII config MPENTIUMM bool "Pentium M" + depends on X86_32 help Select this for Intel Pentium M (not Pentium-4 M) notebook chips. -config MCORE2 - bool "Core 2/newer Xeon" - help - Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx) - CPUs. You can distinguish newer from older Xeons by the CPU family - in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo) - config MPENTIUM4 bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon" + depends on X86_32 help Select this for Intel Pentium 4 chips. This includes the Pentium 4, Pentium D, P4-based Celeron and Xeon, and @@ -148,6 +151,7 @@ config MPENTIUM4 config MK6 bool "K6/K6-II/K6-III" + depends on X86_32 help Select this for an AMD K6-family processor. Enables use of some extended instructions, and passes appropriate optimization @@ -155,6 +159,7 @@ config MK6 config MK7 bool "Athlon/Duron/K7" + depends on X86_32 help Select this for an AMD Athlon K7-family processor. Enables use of some extended instructions, and passes appropriate optimization @@ -169,6 +174,7 @@ config MK8 config MCRUSOE bool "Crusoe" + depends on X86_32 help Select this for a Transmeta Crusoe processor. Treats the processor like a 586 with TSC, and sets some GCC optimization flags (like a @@ -176,11 +182,13 @@ config MCRUSOE config MEFFICEON bool "Efficeon" + depends on X86_32 help Select this for a Transmeta Efficeon processor. config MWINCHIPC6 bool "Winchip-C6" + depends on X86_32 help Select this for an IDT Winchip C6 chip. Linux and GCC treat this chip as a 586TSC with some extended instructions @@ -188,6 +196,7 @@ config MWINCHIPC6 config MWINCHIP2 bool "Winchip-2" + depends on X86_32 help Select this for an IDT Winchip-2. Linux and GCC treat this chip as a 586TSC with some extended instructions @@ -195,6 +204,7 @@ config MWINCHIP2 config MWINCHIP3D bool "Winchip-2A/Winchip-3" + depends on X86_32 help Select this for an IDT Winchip-2A or 3. Linux and GCC treat this chip as a 586TSC with some extended instructions @@ -204,16 +214,19 @@ config MWINCHIP3D config MGEODEGX1 bool "GeodeGX1" + depends on X86_32 help Select this for a Geode GX1 (Cyrix MediaGX) chip. config MGEODE_LX bool "Geode GX/LX" + depends on X86_32 help Select this for AMD Geode GX and LX processors. config MCYRIXIII bool "CyrixIII/VIA-C3" + depends on X86_32 help Select this for a Cyrix III or C3 chip. Presently Linux and GCC treat this chip as a generic 586. Whilst the CPU is 686 class, @@ -225,6 +238,7 @@ config MCYRIXIII config MVIAC3_2 bool "VIA C3-2 (Nehemiah)" + depends on X86_32 help Select this for a VIA C3 "Nehemiah". Selecting this enables usage of SSE and tells gcc to treat the CPU as a 686. @@ -232,15 +246,42 @@ config MVIAC3_2 config MVIAC7 bool "VIA C7" + depends on X86_32 help Select this for a VIA C7. Selecting this uses the correct cache shift and tells gcc to treat the CPU as a 686. +config MPSC + bool "Intel P4 / older Netburst based Xeon" + depends on X86_64 + help + Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey + Xeon CPUs with Intel 64bit which is compatible with x86-64. + Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the + Netburst core and shouldn't use this option. You can distinguish them + using the cpu family field + in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one. + +config MCORE2 + bool "Core 2/newer Xeon" + help + Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx) + CPUs. You can distinguish newer from older Xeons by the CPU family + in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo) + +config GENERIC_CPU + bool "Generic-x86-64" + depends on X86_64 + help + Generic x86-64 CPU. + Run equally well on all x86-64 CPUs. + endchoice config X86_GENERIC - bool "Generic x86 support" - help + bool "Generic x86 support" + depends on X86_32 + help Instead of just including optimizations for the selected x86 variant (e.g. PII, Crusoe or Athlon), include some more generic optimizations as well. This will make the kernel @@ -253,44 +294,31 @@ endif # # Define implied options from the CPU selection here -# +config X86_L1_CACHE_BYTES + int + default "128" if GENERIC_CPU || MPSC + default "64" if MK8 || MCORE2 + depends on X86_64 + +config X86_INTERNODE_CACHE_BYTES + int + default "4096" if X86_VSMP + default X86_L1_CACHE_BYTES if !X86_VSMP + depends on X86_64 + config X86_CMPXCHG - bool - depends on !M386 - default y + def_bool X86_64 || (X86_32 && !M386) config X86_L1_CACHE_SHIFT int - default "7" if MPENTIUM4 || X86_GENERIC + default "7" if MPENTIUM4 || X86_GENERIC || GENERIC_CPU || MPSC default "4" if X86_ELAN || M486 || M386 || MGEODEGX1 default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7 config X86_XADD bool - depends on !M386 - default y - -config RWSEM_GENERIC_SPINLOCK - bool - depends on !X86_XADD - default y - -config RWSEM_XCHGADD_ALGORITHM - bool - depends on X86_XADD - default y - -config ARCH_HAS_ILOG2_U32 - bool - default n - -config ARCH_HAS_ILOG2_U64 - bool - default n - -config GENERIC_CALIBRATE_DELAY - bool + depends on X86_32 && !M386 default y config X86_PPRO_FENCE @@ -305,22 +333,22 @@ config X86_F00F_BUG config X86_WP_WORKS_OK bool - depends on !M386 + depends on X86_32 && !M386 default y config X86_INVLPG bool - depends on !M386 + depends on X86_32 && !M386 default y config X86_BSWAP bool - depends on !M386 + depends on X86_32 && !M386 default y config X86_POPAD_OK bool - depends on !M386 + depends on X86_32 && !M386 default y config X86_ALIGNMENT_16 @@ -330,7 +358,7 @@ config X86_ALIGNMENT_16 config X86_GOOD_APIC bool - depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 + depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 || X86_64 default y config X86_INTEL_USERCOPY @@ -355,7 +383,7 @@ config X86_OOSTORE config X86_TSC bool - depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ + depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64 default y # this should be set for all -march=.. options where the compiler @@ -367,6 +395,7 @@ config X86_CMOV config X86_MINIMUM_CPU_FAMILY int - default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK + default "64" if X86_64 + default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK) default "3" diff --git a/arch/x86/Kconfig.x86_64 b/arch/x86/Kconfig.x86_64 index 264623c..cdd1458 100644 --- a/arch/x86/Kconfig.x86_64 +++ b/arch/x86/Kconfig.x86_64 @@ -78,25 +78,10 @@ config ISA config SBUS bool -config RWSEM_GENERIC_SPINLOCK - bool - default y - -config RWSEM_XCHGADD_ALGORITHM - bool - config GENERIC_HWEIGHT bool default y -config GENERIC_CALIBRATE_DELAY - bool - default y - -config X86_CMPXCHG - bool - default y - config GENERIC_ISA_DMA bool default y @@ -125,13 +110,6 @@ config GENERIC_BUG default y depends on BUG -config ARCH_HAS_ILOG2_U32 - bool - default n - -config ARCH_HAS_ILOG2_U64 - bool - default n source "init/Kconfig" @@ -159,66 +137,7 @@ config X86_VSMP endchoice -choice - prompt "Processor family" - default GENERIC_CPU - -config MK8 - bool "AMD-Opteron/Athlon64" - help - Optimize for AMD Opteron/Athlon64/Hammer/K8 CPUs. - -config MPSC - bool "Intel P4 / older Netburst based Xeon" - help - Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey - Xeon CPUs with Intel 64bit which is compatible with x86-64. - Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the - Netburst core and shouldn't use this option. You can distinguish them - using the cpu family field - in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one. - -config MCORE2 - bool "Intel Core2 / newer Xeon" - help - Optimize for Intel Core2 and newer Xeons (51xx) - You can distinguish the newer Xeons from the older ones using - the cpu family field in /proc/cpuinfo. 15 is an older Xeon - (use CONFIG_MPSC then), 6 is a newer one. - -config GENERIC_CPU - bool "Generic-x86-64" - help - Generic x86-64 CPU. - Run equally well on all x86-64 CPUs. - -endchoice - -# -# Define implied options from the CPU selection here -# -config X86_L1_CACHE_BYTES - int - default "128" if GENERIC_CPU || MPSC - default "64" if MK8 || MCORE2 - -config X86_L1_CACHE_SHIFT - int - default "7" if GENERIC_CPU || MPSC - default "6" if MK8 || MCORE2 - -config X86_INTERNODE_CACHE_BYTES - int - default "4096" if X86_VSMP - default X86_L1_CACHE_BYTES if !X86_VSMP - -config X86_TSC - bool - default y - -config X86_GOOD_APIC - bool - default y +source "arch/x86/Kconfig.cpu" config MICROCODE tristate "/dev/cpu/microcode - Intel CPU microcode support" diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c index e655a89..769065b 100644 --- a/arch/x86/boot/cpucheck.c +++ b/arch/x86/boot/cpucheck.c @@ -42,13 +42,7 @@ static struct cpu_features cpu; static u32 cpu_vendor[3]; static u32 err_flags[NCAPINTS]; -#ifdef CONFIG_X86_64 -static const int req_level = 64; -#elif defined(CONFIG_X86_MINIMUM_CPU_FAMILY) static const int req_level = CONFIG_X86_MINIMUM_CPU_FAMILY; -#else -static const int req_level = 3; -#endif static const u32 req_flags[NCAPINTS] = { -- 1.5.3.4.1157.g0e74-dirty - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/