Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760617AbXKIXV5 (ORCPT ); Fri, 9 Nov 2007 18:21:57 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1757764AbXKIXTV (ORCPT ); Fri, 9 Nov 2007 18:19:21 -0500 Received: from pasmtpa.tele.dk ([80.160.77.114]:60646 "EHLO pasmtpA.tele.dk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754218AbXKIXTI (ORCPT ); Fri, 9 Nov 2007 18:19:08 -0500 From: Sam Ravnborg To: lkml Cc: Sam Ravnborg Subject: [PATCH 06/11] x86: copy x86_64 specific Kconfig symbols to Kconfig.i386 Date: Sat, 10 Nov 2007 00:20:40 +0100 Message-Id: <119465044610-git-send-email-sam@ravnborg.org> X-Mailer: git-send-email 1.5.0.6 In-Reply-To: <20071109230812.GA5176@uranus.ravnborg.org> References: <20071109230812.GA5176@uranus.ravnborg.org> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13872 Lines: 400 No functional changes. A prepatory step towards full unification. Signed-off-by: Sam Ravnborg --- arch/x86/Kconfig | 6 +- arch/x86/Kconfig.i386 | 215 ++++++++++++++++++++++++++++++++++++++++++++----- 2 files changed, 198 insertions(+), 23 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e741fc7..9fbb049 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -353,11 +353,11 @@ config GEODE_MFGPT_TIMER MFGPTs have a better resolution and max interval than the generic PIT, and are suitable for use as high-res timers. +endif # X86_32 + config K8_NB def_bool y - depends on AGP_AMD64 - -endif # X86_32 + depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA))) source "drivers/pcmcia/Kconfig" diff --git a/arch/x86/Kconfig.i386 b/arch/x86/Kconfig.i386 index 174b909..3be7672 100644 --- a/arch/x86/Kconfig.i386 +++ b/arch/x86/Kconfig.i386 @@ -218,6 +218,14 @@ config X86_ES7000 Only choose this option if you have such a system, otherwise you should say N here. +config X86_VSMP + bool "Support for ScaleMP vSMP" + depends on X86_64 && PCI + help + Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is + supposed to run on these EM64T-based machines. Only choose this option + if you have one of these machines. + endchoice config SCHED_NO_NO_OMIT_FRAME_POINTER @@ -299,20 +307,87 @@ source "arch/x86/Kconfig.cpu" config HPET_TIMER bool prompt "HPET Timer Support" if X86_32 + default X86_64 help - This enables the use of the HPET for the kernel's internal timer. - HPET is the next generation timer replacing legacy 8254s. - You can safely choose Y here. However, HPET will only be - activated if the platform and the BIOS support this feature. - Otherwise the 8254 will be used for timing services. + Use the IA-PC HPET (High Precision Event Timer) to manage + time in preference to the PIT and RTC, if a HPET is + present. + HPET is the next generation timer replacing legacy 8254s. + The HPET provides a stable time base on SMP + systems, unlike the TSC, but it is more expensive to access, + as it is off-chip. You can find the HPET spec at + . + + You can safely choose Y here. However, HPET will only be + activated if the platform and the BIOS support this feature. + Otherwise the 8254 will be used for timing services. - Choose N to continue using the legacy 8254 timer. + Choose N to continue using the legacy 8254 timer. config HPET_EMULATE_RTC bool depends on HPET_TIMER && RTC=y default y +# Mark as embedded because too many people got it wrong. +# The code disables itself when not needed. +config GART_IOMMU + bool "GART IOMMU support" if EMBEDDED + default y + select SWIOTLB + select AGP + depends on X86_64 && PCI + help + Support for full DMA access of devices with 32bit memory access only + on systems with more than 3GB. This is usually needed for USB, + sound, many IDE/SATA chipsets and some other devices. + Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART + based hardware IOMMU and a software bounce buffer based IOMMU used + on Intel systems and as fallback. + The code is only active when needed (enough memory and limited + device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified + too. + +config CALGARY_IOMMU + bool "IBM Calgary IOMMU support" + select SWIOTLB + depends on X86_64 && PCI && EXPERIMENTAL + help + Support for hardware IOMMUs in IBM's xSeries x366 and x460 + systems. Needed to run systems with more than 3GB of memory + properly with 32-bit PCI devices that do not support DAC + (Double Address Cycle). Calgary also supports bus level + isolation, where all DMAs pass through the IOMMU. This + prevents them from going anywhere except their intended + destination. This catches hard-to-find kernel bugs and + mis-behaving drivers and devices that do not use the DMA-API + properly to set up their DMA buffers. The IOMMU can be + turned off at boot time with the iommu=off parameter. + Normally the kernel will make the right choice by itself. + If unsure, say Y. + +config CALGARY_IOMMU_ENABLED_BY_DEFAULT + bool "Should Calgary be enabled by default?" + default y + depends on CALGARY_IOMMU + help + Should Calgary be enabled by default? if you choose 'y', Calgary + will be used (if it exists). If you choose 'n', Calgary will not be + used even if it exists. If you choose 'n' and would like to use + Calgary anyway, pass 'iommu=calgary' on the kernel command line. + If unsure, say Y. + +# need this always selected by IOMMU for the VIA workaround +config SWIOTLB + bool + help + Support for software bounce buffers used on x86-64 systems + which don't have a hardware IOMMU (e.g. the current generation + of Intel's x86-64 CPUs). Using this PCI devices which can only + access 32-bits of memory can be used on systems with more than + 3 GB of memory. If unsure, say Y. + + config NR_CPUS int "Maximum number of CPUs (2-255)" range 2 255 @@ -329,7 +404,7 @@ config NR_CPUS config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" - depends on X86_HT + depends on (X86_64 && SMP) || (X86_32 && X86_HT) help SMT scheduler support improves the CPU scheduler's decision making when dealing with Intel Pentium 4 chips with HyperThreading at a @@ -338,7 +413,7 @@ config SCHED_SMT config SCHED_MC bool "Multi-core scheduler support" - depends on X86_HT + depends on (X86_64 && SMP) || (X86_32 && X86_HT) default y help Multi-core scheduler support improves the CPU scheduler's decision @@ -374,12 +449,12 @@ config X86_UP_IOAPIC config X86_LOCAL_APIC bool - depends on X86_32 && (X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH) + depends on X86_64 || (X86_32 && (X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH)) default y config X86_IO_APIC bool - depends on X86_32 && (X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH) + depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH)) default y config X86_VISWS_APIC @@ -404,6 +479,22 @@ config X86_MCE to disable it. MCE support simply ignores non-MCE processors like the 386 and 486, so nearly everyone can say Y here. +config X86_MCE_INTEL + bool "Intel MCE features" + depends on X86_64 && X86_MCE && X86_LOCAL_APIC + default y + help + Additional support for intel specific MCE features such as + the thermal monitor. + +config X86_MCE_AMD + bool "AMD MCE features" + depends on X86_64 && X86_MCE && X86_LOCAL_APIC + default y + help + Additional support for AMD specific MCE features such as + the DRAM Error Threshold. + config X86_MCE_NONFATAL tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4" depends on X86_32 && X86_MCE @@ -651,19 +742,55 @@ config X86_PAE # Common NUMA Features config NUMA bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)" - depends on X86_32 && SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL + depends on SMP + depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL) default n if X86_PC default y if (X86_NUMAQ || X86_SUMMIT) help - NUMA support for i386. This is currently highly experimental - and should be only used for kernel development. It might also - cause boot failures. + Enable NUMA (Non Uniform Memory Access) support. + The kernel will try to allocate memory used by a CPU on the + local memory controller of the CPU and add some more + NUMA awareness to the kernel. + + For i386 this is currently highly experimental and should be only + used for kernel development. It might also cause boot failures. + For x86_64 this is recommended on all multiprocessor Opteron systems. + If the system is EM64T, you should say N unless your system is + EM64T NUMA. comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI) +config K8_NUMA + bool "Old style AMD Opteron NUMA detection" + depends on X86_64 && NUMA && PCI + default y + help + Enable K8 NUMA node topology detection. You should say Y here if + you have a multi processor AMD K8 system. This uses an old + method to read the NUMA configuration directly from the builtin + Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA + instead, which also takes priority if both are compiled in. + +config X86_64_ACPI_NUMA + bool "ACPI NUMA detection" + depends on X86_64 && NUMA && ACPI && PCI + select ACPI_NUMA + default y + help + Enable ACPI SRAT based node topology detection. + +config NUMA_EMU + bool "NUMA emulation" + depends on X86_64 && NUMA + help + Enable NUMA emulation. A flat machine will be split + into virtual nodes when booted with "numa=fake=N", where N is the + number of nodes. This is only useful for debugging. + config NODES_SHIFT int + default "6" if X86_64 default "4" if X86_NUMAQ default "3" depends on NEED_MULTIPLE_NODES @@ -690,7 +817,7 @@ config HAVE_ARCH_ALLOC_REMAP config ARCH_FLATMEM_ENABLE def_bool y - depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC + depends on (X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC) || (X86_64 && !NUMA) config ARCH_DISCONTIGMEM_ENABLE def_bool y @@ -702,8 +829,9 @@ config ARCH_DISCONTIGMEM_DEFAULT config ARCH_SPARSEMEM_ENABLE def_bool y - depends on (NUMA || (X86_PC && EXPERIMENTAL)) + depends on NUMA || (EXPERIMENTAL && (X86_PC || X86_64)) select SPARSEMEM_STATIC if X86_32 + select SPARSEMEM_VMEMMAP_ENABLE if X86_64 config ARCH_SELECT_MEMORY_MODEL def_bool y @@ -712,6 +840,10 @@ config ARCH_SELECT_MEMORY_MODEL config ARCH_POPULATES_NODE_MAP def_bool y +config ARCH_MEMORY_PROBE + def_bool X86_64 + depends on MEMORY_HOTPLUG + source "mm/Kconfig" config HIGHPTE @@ -833,6 +965,30 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. +config CC_STACKPROTECTOR + bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" + depends on X86_64 && EXPERIMENTAL + help + This option turns on the -fstack-protector GCC feature. This + feature puts, at the beginning of critical functions, a canary + value on the stack just before the return address, and validates + the value just before actually returning. Stack based buffer + overflows (that need to overwrite this return address) now also + overwrite the canary, which gets detected and the attack is then + neutralized via a kernel panic. + + This feature requires gcc version 4.2 or above, or a distribution + gcc with the feature backported. Older versions are automatically + detected and for those versions, this configuration option is ignored. + +config CC_STACKPROTECTOR_ALL + bool "Use stack-protector for all functions" + depends on CC_STACKPROTECTOR + help + Normally, GCC only inserts the canary value protection for + functions that use large-ish on-stack buffers. By enabling + this option, GCC will be asked to do this for ALL functions. + source kernel/Kconfig.hz config KEXEC @@ -854,7 +1010,7 @@ config KEXEC config CRASH_DUMP bool "kernel crash dumps (EXPERIMENTAL)" depends on EXPERIMENTAL - depends on HIGHMEM + depends on X86_64 || (X86_32 && HIGHMEM) help Generate crash dump after being started by kexec. This should be normally only set in special crash dump kernels @@ -869,6 +1025,7 @@ config CRASH_DUMP config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) default "0x1000000" if X86_NUMAQ + default "0x200000" if X86_64 default "0x100000" help This gives the physical address where the kernel is loaded. @@ -921,10 +1078,15 @@ config RELOCATABLE must live at a different physical address than the primary kernel. + Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address + it has been loaded at and the compile time physical address + (CONFIG_PHYSICAL_START) is ignored. + config PHYSICAL_ALIGN hex prompt "Alignment value to which kernel should be aligned" if X86_32 - default "0x100000" + default "0x100000" if X86_32 + default "0x200000" if X86_64 range 0x2000 0x400000 help This value puts the alignment restrictions on physical address @@ -952,6 +1114,8 @@ config HOTPLUG_CPU Say Y here to experiment with turning CPUs off and on, and to enable suspend on SMP systems. CPUs can be controlled through /sys/devices/system/cpu. + Say N if you want to disable CPU hotplug and don't need to + suspend. config COMPAT_VDSO bool "Compat VDSO support" @@ -970,8 +1134,19 @@ endmenu config ARCH_ENABLE_MEMORY_HOTPLUG def_bool y - depends on HIGHMEM + depends on X86_64 || (X86_32 && HIGHMEM) + +config MEMORY_HOTPLUG_RESERVE + def_bool X86_64 + depends on (MEMORY_HOTPLUG && DISCONTIGMEM) + +config HAVE_ARCH_EARLY_PFN_TO_NID + def_bool X86_64 + depends on NUMA +config OUT_OF_LINE_PFN_TO_PAGE + def_bool X86_64 + depends on DISCONTIGMEM # # Use the generic interrupt handling code in kernel/irq/: @@ -996,7 +1171,7 @@ config X86_SMP config X86_HT bool - depends on SMP && !(X86_VISWS || X86_VOYAGER) + depends on SMP && !(X86_VISWS || X86_VOYAGER || MK8) default y config X86_BIOS_REBOOT -- 1.5.3.4.1157.g0e74-dirty - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/