Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:8 as permitted sender) client-ip=2620:137:e000::3:8;
From:   Ravi Gunasekaran <r-gunasekaran@ti.com>
To:     <nm@ti.com>, <vigneshr@ti.com>
CC:     <kristo@kernel.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <sinthu.raja@ti.com>, <r-gunasekaran@ti.com>
Subject: [PATCH 2/3] arm64: dts: ti: k3-am68-sk: Add DT node for PCIe
Date:   Thu, 21 Sep 2023 15:30:38 +0530
Message-ID: <20230921100039.19897-3-r-gunasekaran@ti.com>
In-Reply-To: <20230921100039.19897-1-r-gunasekaran@ti.com>
References: <20230921100039.19897-1-r-gunasekaran@ti.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

From: Sinthu Raja <sinthu.raja@ti.com>

AM68 Starter kit features with one PCIe M.2 Key M connector
interfaced via two SerDes lanes. Update the SerDes configuration
for PCIe.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
---
 .../boot/dts/ti/k3-am68-sk-base-board.dts     | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 5df5946687b3..81c2307c77f9 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -553,3 +553,32 @@
 		};
 	};
 };
+
+&serdes_ln_ctrl {
+	idle-states = <J721S2_SERDES0_LANE0_PCIE1_LANE0>, <J721S2_SERDES0_LANE1_PCIE1_LANE1>,
+		      <J721S2_SERDES0_LANE2_USB_SWAP>, <J721S2_SERDES0_LANE3_USB>;
+};
+
+&serdes_refclk {
+	clock-frequency = <100000000>;
+};
+
+&serdes0 {
+	status = "okay";
+
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+	};
+};
+
+&pcie1_rc {
+	status = "okay";
+	reset-gpios = <&exp1 10 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
-- 
2.17.1