Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.36 as permitted sender) client-ip=23.128.96.36;
From:   Tengfei Fan <quic_tengfan@quicinc.com>
To:     <agross@kernel.org>, <andersson@kernel.org>,
        <konrad.dybcio@linaro.org>, <tglx@linutronix.de>, <maz@kernel.org>,
        <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <conor+dt@kernel.org>, <catalin.marinas@arm.com>, <will@kernel.org>
CC:     <geert+renesas@glider.be>, <arnd@arndb.de>,
        <neil.armstrong@linaro.org>, <nfraprado@collabora.com>,
        <rafal@milecki.pl>, <peng.fan@nxp.com>,
        <linux-arm-msm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>, <quic_tsoni@quicinc.com>,
        <quic_shashim@quicinc.com>, <quic_kaushalk@quicinc.com>,
        <quic_tdas@quicinc.com>, <quic_tingweiz@quicinc.com>,
        <quic_aiquny@quicinc.com>, <kernel@quicinc.com>,
        Tengfei Fan <quic_tengfan@quicinc.com>
Subject: [PATCH v4 5/6] arm64: dts: qcom: sm4450-qrd: add QRD4450 uart support
Date:   Fri, 22 Sep 2023 16:10:25 +0800
Message-ID: <20230922081026.2799-6-quic_tengfan@quicinc.com>
In-Reply-To: <20230922081026.2799-1-quic_tengfan@quicinc.com>
References: <20230922081026.2799-1-quic_tengfan@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Add uart support for QRD4450 for enable uart console.

Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sm4450-qrd.dts | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
index 00a1c81ca397..e354bad57a9e 100644
--- a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
@@ -10,9 +10,24 @@
 	model = "Qualcomm Technologies, Inc. SM4450 QRD";
 	compatible = "qcom,sm4450-qrd", "qcom,sm4450";
 
-	aliases { };
+	aliases {
+		serial0 = &uart7;
+	};
 
 	chosen {
-		bootargs = "console=hvc0";
+		stdout-path = "serial0:115200n8";
 	};
 };
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	/* Reserved for other subsystems */
+	gpio-reserved-ranges = <0 4>, <136 1>;
+};
+
+&uart7 {
+	status = "okay";
+};
-- 
2.17.1