Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:3 as permitted sender) client-ip=2620:137:e000::3:3;
Date:   Fri, 22 Sep 2023 19:08:18 +0300
From:   Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To:     Alain Volmat <alain.volmat@foss.st.com>
Cc:     Hugues Fruchet <hugues.fruchet@foss.st.com>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Maxime Coquelin <mcoquelin.stm32@gmail.com>,
        Alexandre Torgue <alexandre.torgue@foss.st.com>,
        Russell King <linux@armlinux.org.uk>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Sakari Ailus <sakari.ailus@linux.intel.com>,
        Dan Scally <dan.scally@ideasonboard.com>,
        linux-media@vger.kernel.org, devicetree@vger.kernel.org,
        linux-stm32@st-md-mailman.stormreply.com,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 4/5] ARM: dts: stm32: add dcmipp support to stm32mp135
Message-ID: <20230922160818.GJ19112@pendragon.ideasonboard.com>
References: <20230901155732.252436-1-alain.volmat@foss.st.com>
 <20230901155732.252436-5-alain.volmat@foss.st.com>
 <20230905090258.GC31594@pendragon.ideasonboard.com>
 <20230922160227.GA608616@gnbcxd0016.gnb.st.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
In-Reply-To: <20230922160227.GA608616@gnbcxd0016.gnb.st.com>
Precedence: bulk

On Fri, Sep 22, 2023 at 06:02:27PM +0200, Alain Volmat wrote:
> On Tue, Sep 05, 2023 at 12:02:58PM +0300, Laurent Pinchart wrote:
> > On Fri, Sep 01, 2023 at 05:57:23PM +0200, Alain Volmat wrote:
> > > From: Hugues Fruchet <hugues.fruchet@foss.st.com>
> > > 
> > > Add dcmipp support to STM32MP135.
> > > 
> > > Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
> > > Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
> > > ---
> > >  arch/arm/boot/dts/st/stm32mp135.dtsi | 8 ++++++++
> > >  1 file changed, 8 insertions(+)
> > > 
> > > diff --git a/arch/arm/boot/dts/st/stm32mp135.dtsi b/arch/arm/boot/dts/st/stm32mp135.dtsi
> > > index abf2acd37b4e..beee9ec7ed0d 100644
> > > --- a/arch/arm/boot/dts/st/stm32mp135.dtsi
> > > +++ b/arch/arm/boot/dts/st/stm32mp135.dtsi
> > > @@ -8,5 +8,13 @@
> > >  
> > >  / {
> > >  	soc {
> > > +		dcmipp: dcmipp@5a000000 {
> > > +			compatible = "st,stm32mp13-dcmipp";
> > > +			reg = <0x5a000000 0x400>;
> > > +			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> > > +			resets = <&rcc DCMIPP_R>;
> > > +			clocks = <&rcc DCMIPP_K>;
> > > +			status = "disabled";
> > 
> > This needs a port, as it's marked as required in the bindings. You can
> > leave the endpoint out.
> 
> I first agreed with your comment but, having done the check (make
> CHECK_DTBS=y  ...) this doesn't seem to be required because the dcmipp
> node is kept disabled within our dtsi.

Interesting.

> (it is later on only enabled in dts file which as well have the port
> property).
> Indeed, to check this I changed it to okay and DTC_CHK complained about
> missing port property.
> 
> Hence, I'd think that port doesn't have to be added in this dtsi file.
> Would you agree with that ?

I still think the port belongs here, as it's an intrinsic property of
the dcmipp, not a property of the board. Does it cause any issue to add
a port in the .dtsi ?

> > With this fixed,
> > 
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > 
> > > +		};
> > >  	};
> > >  };

-- 
Regards,

Laurent Pinchart