Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.32 as permitted sender) client-ip=23.128.96.32;
From:   Jernej =?utf-8?B?xaBrcmFiZWM=?= <jernej.skrabec@gmail.com>
To:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Chen-Yu Tsai <wens@csie.org>,
        Samuel Holland <samuel@sholland.org>,
        Maxime Ripard <mripard@kernel.org>,
        Martin Botka <martin.botka@somainline.org>
Cc:     Rob Herring <robh@kernel.org>, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-sunxi@lists.linux.dev,
        Andre Przywara <andre.przywara@arm.com>,
        Alan Ma <tech@biqu3d.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@somainline.org>,
        Martin Botka <martin@biqu3d.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        Rogerio Goncalves <rogerlz@gmail.com>,
        Martin Botka <martin.botka@somainline.org>
Subject: Re: [PATCH v6 0/4] Add BigTreeTech CB1 SoM & Boards
Date:   Sun, 24 Sep 2023 21:58:50 +0200
Message-ID: <7571855.EvYhyI6sBW@jernej-laptop>
In-Reply-To: <20230912-b4-cb1-v6-0-bb11238f3a9c@somainline.org>
References: <20230912-b4-cb1-v6-0-bb11238f3a9c@somainline.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 7Bit
Content-Type: text/plain; charset="us-ascii"
Precedence: bulk

Dne torek, 12. september 2023 ob 13:20:46 CEST je Martin Botka napisal(a):
> Hello,
> This series adds a vendor prefix for BigTreeTech and adds BigTreeTech CB1,
> Manta board and BigTreeTech Pi.
> 
> CB1 is just an SoM thats based on AllWinner H616.
> BigTreeTech Manta boards are expander boards for CB1 and BigTreeTech Pi
> is an CB1 in Rpi style with few additional things like IR receiver and fan port
> on GPIO.
> 
> This work started before I was hired by BigTreeTech and thus majority of the
> patches are from SoMainline email and few are from my work email.
> 
> This series depends on commit https://lkml.org/lkml/2023/8/28/1073
> and https://lkml.org/lkml/2023/8/2/801
> 
> Cheers,
> Martin

Applied, thanks!

Best regards,
Jernej

> 
> Signed-off-by: Martin Botka <martin.botka@somainline.org>
> ---
> Changes in v6:
> - Remove SPI node from BTT Pi (To be used via overlays)
> - Rebase on top of 6.6-rc1
> 
> Changes in v5:
> - Removal of wifi node comments that were obvious from properties
> 
> Changes in v4:
> - Extend the range of vcc-dram to 1.5V (Max of 1.35V caused issues with booting up)
> 
> Changes in v3:
> - Add missed semicolons
> - Move model string from dtsi to board dts
> - Add cb1 compatible to manta
> - Remove extra empty lines
> - Add pinctrl for SPI0
> 
> Changes in v2:
> - Fix alphabetical order in vendor prefixes
> - Remove CB1 SoM from bindings (Its not standalone)
> - Fixed whitespace errors
> - Move UART into carrier boards and BTT Pi
> - Remove usb1-vbus regulator
> - Fix ranges and naming of AXP313A rails
> - Add comment why broken-cb in mmc0 is needed
> - Rename sdio_wifi to wifi
> - Add model string to BTT Pi
> - Enable IR receiver for BTT Pi
> - Enable SPI0
> 
> ---
> Martin Botka (4):
>       dt-bindings: vendor-prefixes: Add BigTreeTech
>       dt-bindings: arm: sunxi: Add BigTreeTech boards
>       arm64: dts: allwinner: h616: Add BigTreeTech CB1 SoM & boards support
>       arm64: dts: allwinner: h616: Add BigTreeTech Pi support
> 
>  Documentation/devicetree/bindings/arm/sunxi.yaml   |  11 ++
>  .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
>  arch/arm64/boot/dts/allwinner/Makefile             |   2 +
>  .../sun50i-h616-bigtreetech-cb1-manta.dts          |  35 ++++++
>  .../dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi | 138 +++++++++++++++++++++
>  .../dts/allwinner/sun50i-h616-bigtreetech-pi.dts   |  63 ++++++++++
>  6 files changed, 251 insertions(+)
> ---
> base-commit: cc19c78b3b3f1af285182dd800a3def22227f9a2
> change-id: 20230814-b4-cb1-4b18801ecf6e
> 
> Best regards,
>