Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) client-ip=23.128.96.34;
Date:   Tue, 26 Sep 2023 10:25:38 +0300
From:   Tony Lindgren <tony@atomide.com>
To:     Trevor Woerner <twoerner@gmail.com>
Cc:     robertcnelson@gmail.com, drew@beagleboard.org,
        =?utf-8?Q?Beno=C3=AEt?= Cousson <bcousson@baylibre.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org
Subject: Re: [PATCH v3 4/4] ARM: dts: am335x-pocketbeagle: add missing GPIO
 mux
Message-ID: <20230926072538.GY5285@atomide.com>
References: <20230822143051.7640-1-twoerner@gmail.com>
 <20230822143051.7640-5-twoerner@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20230822143051.7640-5-twoerner@gmail.com>
Precedence: bulk

* Trevor Woerner <twoerner@gmail.com> [230822 14:31]:
> Add the default MODE setting of a GPIO pin that was missing from the device
> tree (i.e. P2.20/gpio2_00). This is to ensure the GPIO pins match the
> pocketbeagle wiring expectations.
> 
> Signed-off-by: Trevor Woerner <twoerner@gmail.com>
> ---
>  arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts
> index e35d84ca5706..8042917b3b3b 100644
> --- a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts
> +++ b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts
> @@ -271,6 +271,16 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7)
>  		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
>  	};
>  
> +	/* P2_20 (ZCZ ball T13) gpio2_00 0x888 */
> +	P2_20_gpio: P2-20-gpio-pins {
> +		pinctrl-single,pins = <
> +			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE7)
> +		>;
> +		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
> +		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
> +	};
> +
> +
>  	/* P2_10 (ZCZ ball R14) gpio1_20 0x850 PIN 20 */
>  	P2_10_gpio: P2-10-gpio-pins {
>  		pinctrl-single,pins = <

Thanks applying all four patches into omap-for-v6.7/dt. I left out the extra
line break above though.

Regards,

Tony