Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) client-ip=2620:137:e000::3:2;
From:   Tim Harvey <tharvey@gateworks.com>
To:     Shawn Guo <shawnguo@kernel.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        Tim Harvey <tharvey@gateworks.com>
Subject: [PATCH v2] ARM: dts: imx6qdl-gw5904: add dt props for populating eth MAC addrs
Date:   Tue, 26 Sep 2023 12:41:10 -0700
Message-Id: <20230926194110.1451416-1-tharvey@gateworks.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add device-tree props to allow boot firmware to populate MAC addresses.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---
v2: rebased on latest tree now that arm dt files have moved
---
 arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
index 3375b3fd8d4c..1e723807ab4c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
@@ -52,6 +52,11 @@
 / {
 	/* these are used by bootloader for disabling nodes */
 	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
+		ethernet3 = &lan3;
+		ethernet4 = &lan4;
 		led0 = &led0;
 		led1 = &led1;
 		led2 = &led2;
@@ -237,32 +242,36 @@ ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				lan4: port@0 {
 					reg = <0>;
 					label = "lan4";
 					phy-handle = <&sw_phy0>;
 					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
-				port@1 {
+				lan3: port@1 {
 					reg = <1>;
 					label = "lan3";
 					phy-handle = <&sw_phy1>;
 					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
-				port@2 {
+				lan2: port@2 {
 					reg = <2>;
 					label = "lan2";
 					phy-handle = <&sw_phy2>;
 					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
-				port@3 {
+				lan1: port@3 {
 					reg = <3>;
 					label = "lan1";
 					phy-handle = <&sw_phy3>;
 					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
 				port@5 {
-- 
2.25.1