Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:6 as permitted sender) client-ip=2620:137:e000::3:6;
From:   Justin Lai <justinlai0215@realtek.com>
To:     <kuba@kernel.org>
CC:     <davem@davemloft.net>, <edumazet@google.com>, <pabeni@redhat.com>,
        <linux-kernel@vger.kernel.org>, <netdev@vger.kernel.org>,
        <andrew@lunn.ch>, <pkshih@realtek.com>, <larry.chiu@realtek.com>,
        Justin Lai <justinlai0215@realtek.com>
Subject: [PATCH net-next v9 12/13] net:ethernet:realtek: Update the Makefile and Kconfig in the realtek folder
Date:   Thu, 28 Sep 2023 18:49:19 +0800
Message-ID: <20230928104920.113511-13-justinlai0215@realtek.com>
In-Reply-To: <20230928104920.113511-1-justinlai0215@realtek.com>
References: <20230928104920.113511-1-justinlai0215@realtek.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 7BIT
Content-Type:   text/plain; charset=US-ASCII
Precedence: bulk

1. Add the RTASE entry in the Kconfig.
2. Add the CONFIG_RTASE entry in the Makefile.

Signed-off-by: Justin Lai <justinlai0215@realtek.com>
---
 drivers/net/ethernet/realtek/Kconfig  | 17 +++++++++++++++++
 drivers/net/ethernet/realtek/Makefile |  1 +
 2 files changed, 18 insertions(+)

diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
index 93d9df55b361..57ef924deebd 100644
--- a/drivers/net/ethernet/realtek/Kconfig
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -113,4 +113,21 @@ config R8169
 	  To compile this driver as a module, choose M here: the module
 	  will be called r8169.  This is recommended.
 
+config RTASE
+	tristate "Realtek Automotive Switch 9054/9068/9072/9075/9068/9071 PCIe Interface support"
+	depends on PCI
+	select CRC32
+	help
+	  Say Y here if you have a Realtek Ethernet adapter belonging to
+	  the following families:
+	  RTL9054 5GBit Ethernet
+	  RTL9068 5GBit Ethernet
+	  RTL9072 5GBit Ethernet
+	  RTL9075 5GBit Ethernet
+	  RTL9068 5GBit Ethernet
+	  RTL9071 5GBit Ethernet
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called rtase. This is recommended.
+
 endif # NET_VENDOR_REALTEK
diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile
index 2e1d78b106b0..0c1c16f63e9a 100644
--- a/drivers/net/ethernet/realtek/Makefile
+++ b/drivers/net/ethernet/realtek/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_8139TOO) += 8139too.o
 obj-$(CONFIG_ATP) += atp.o
 r8169-objs += r8169_main.o r8169_firmware.o r8169_phy_config.o
 obj-$(CONFIG_R8169) += r8169.o
+obj-$(CONFIG_RTASE) += rtase/
-- 
2.34.1