Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.36 as permitted sender) client-ip=23.128.96.36;
From:   Christophe Roullier <christophe.roullier@foss.st.com>
To:     "David S . Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Maxime Coquelin <mcoquelin.stm32@gmail.com>,
        Alexandre Torgue <alexandre.torgue@foss.st.com>,
        Richard Cochran <richardcochran@gmail.com>,
        Jose Abreu <joabreu@synopsys.com>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        Christophe Roullier <christophe.roullier@foss.st.com>
CC:     <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 06/12] net: ethernet: stmmac: stm32: update config management for phy wo cristal
Date:   Thu, 28 Sep 2023 14:24:21 +0200
Message-ID: <20230928122427.313271-7-christophe.roullier@foss.st.com>
In-Reply-To: <20230928122427.313271-1-christophe.roullier@foss.st.com>
References: <20230928122427.313271-1-christophe.roullier@foss.st.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

From: Christophe Roullier <christophe.roullier@st.com>

Some cleaning because some Ethernet PHY configs do not need to add st,ext-phyclk property
Change print info message "No phy clock provided" only when debug

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 27 ++++++++++---------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index a071dc6ffc95b..1210062f0832a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -55,17 +55,17 @@
  *|         |        |      25MHz    |        50MHz       |                  |
  * ---------------------------------------------------------------------------
  *|  MII    |	 -   |     eth-ck    |	      n/a	  |	  n/a        |
- *|         |        | st,ext-phyclk |                    |		     |
+ *|         |        |	             |                    |		     |
  * ---------------------------------------------------------------------------
  *|  GMII   |	 -   |     eth-ck    |	      n/a	  |	  n/a        |
- *|         |        | st,ext-phyclk |                    |		     |
+ *|         |        |               |                    |		     |
  * ---------------------------------------------------------------------------
  *| RGMII   |	 -   |     eth-ck    |	      n/a	  |      eth-ck      |
- *|         |        | st,ext-phyclk |                    | st,eth-clk-sel or|
+ *|         |        |               |                    | st,eth-clk-sel or|
  *|         |        |               |                    | st,ext-phyclk    |
  * ---------------------------------------------------------------------------
  *| RMII    |	 -   |     eth-ck    |	    eth-ck        |	  n/a        |
- *|         |        | st,ext-phyclk | st,eth-ref-clk-sel |		     |
+ *|         |        |               | st,eth-ref-clk-sel |		     |
  *|         |        |               | or st,ext-phyclk   |		     |
  * ---------------------------------------------------------------------------
  *
@@ -180,23 +180,22 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
 	dwmac->enable_eth_ck = false;
 	switch (plat_dat->mac_interface) {
 	case PHY_INTERFACE_MODE_MII:
-		if (clk_rate == ETH_CK_F_25M && dwmac->ext_phyclk)
+		if (clk_rate == ETH_CK_F_25M)
 			dwmac->enable_eth_ck = true;
 		val = dwmac->ops->pmcsetr.eth1_selmii;
 		pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n");
 		break;
 	case PHY_INTERFACE_MODE_GMII:
 		val = SYSCFG_PMCR_ETH_SEL_GMII;
-		if (clk_rate == ETH_CK_F_25M &&
-		    (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) {
+		if (clk_rate == ETH_CK_F_25M)
 			dwmac->enable_eth_ck = true;
-			val |= dwmac->ops->pmcsetr.eth1_clk_sel;
-		}
 		pr_debug("SYSCFG init : PHY_INTERFACE_MODE_GMII\n");
 		break;
 	case PHY_INTERFACE_MODE_RMII:
 		val = dwmac->ops->pmcsetr.eth1_sel_rmii | dwmac->ops->pmcsetr.eth2_sel_rmii;
-		if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_50M) &&
+		if (clk_rate == ETH_CK_F_25M)
+			dwmac->enable_eth_ck = true;
+		if ((clk_rate == ETH_CK_F_50M) &&
 		    (dwmac->eth_ref_clk_sel_reg || dwmac->ext_phyclk)) {
 			dwmac->enable_eth_ck = true;
 			val |= dwmac->ops->pmcsetr.eth1_ref_clk_sel;
@@ -209,7 +208,9 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
 	case PHY_INTERFACE_MODE_RGMII_RXID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
 		val = dwmac->ops->pmcsetr.eth1_sel_rgmii | dwmac->ops->pmcsetr.eth2_sel_rgmii;
-		if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_125M) &&
+		if (clk_rate == ETH_CK_F_25M)
+			dwmac->enable_eth_ck = true;
+		if ((clk_rate == ETH_CK_F_125M) &&
 		    (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) {
 			dwmac->enable_eth_ck = true;
 			val |= dwmac->ops->pmcsetr.eth1_clk_sel;
@@ -225,7 +226,7 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
 	}
 
 	/* Need to update PMCCLRR (clear register) */
-	regmap_write(dwmac->regmap, reg + dwmac->ops->syscfg_clr_off,
+	regmap_write(dwmac->regmap, dwmac->ops->syscfg_clr_off,
 		     dwmac->mode_mask);
 
 	/* Update PMCSETR (set register) */
@@ -332,7 +333,7 @@ static int stm32mp1_parse_data(struct stm32_dwmac *dwmac,
 	/*  Get ETH_CLK clocks */
 	dwmac->clk_eth_ck = devm_clk_get(dev, "eth-ck");
 	if (IS_ERR(dwmac->clk_eth_ck)) {
-		dev_info(dev, "No phy clock provided...\n");
+		dev_dbg(dev, "No phy clock provided...\n");
 		dwmac->clk_eth_ck = NULL;
 	}
 
-- 
2.25.1