Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757539AbXKMRS4 (ORCPT ); Tue, 13 Nov 2007 12:18:56 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754150AbXKMRSs (ORCPT ); Tue, 13 Nov 2007 12:18:48 -0500 Received: from moci.net4u.de ([217.7.64.195]:38823 "EHLO moci.net4u.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754059AbXKMRSq convert rfc822-to-8bit (ORCPT ); Tue, 13 Nov 2007 12:18:46 -0500 X-Greylist: delayed 1386 seconds by postgrey-1.27 at vger.kernel.org; Tue, 13 Nov 2007 12:18:45 EST From: Ernst Herzberg To: linux-kernel@vger.kernel.org Subject: [BUG] pcmcia serial_cs no interrupts Date: Tue, 13 Nov 2007 17:55:25 +0100 User-Agent: KMail/1.9.7 MIME-Version: 1.0 Content-Disposition: inline Reply-To: earny@net4u.de Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8BIT Message-Id: <200711131755.25246.list-lkml@net4u.de> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 28349 Lines: 593 This pcmcia-card (UMTS Modem) only works if it shares his interrupt with another device, eg an usb mice. Moving the mice increases the connection speed, unplugging hangs the connection. Tested with 2.6.24-rc2, it is not a regression... 2.6.23/22 - same problem. Hardware: Thinkpad R60 google found some similar reports about this problem without a resolution: http://ubuntuforums.org/showpost.php?p=1537086&postcount=10 http://linux.derkeiler.com/Mailing-Lists/Fedora/2005-03/6705.html At the moment this card is my only way to reach the internet, but here in the hospital i have a lot time to test patches;) ------------ Socket 0: 5.0V 16-bit PC Card Subdevice 0 (function 0) bound to driver "serial_cs" Subdevice 1 (function 1) bound to driver "serial_cs" ------------ Socket 0: product info: "Novatel Wireless", "Merlin UMTS Modem", "U630", "" manfid: 0x00a4, 0x0276 function: 2 (serial) ------------ CPU0 CPU1 0: 687950 0 IO-APIC-edge timer 1: 4701 0 IO-APIC-edge i8042 8: 1 0 IO-APIC-edge rtc 9: 318526 0 IO-APIC-fasteoi acpi 12: 4138 0 IO-APIC-edge i8042 14: 111586 0 IO-APIC-edge libata 15: 0 0 IO-APIC-edge libata 16: 72808 0 IO-APIC-fasteoi yenta, uhci_hcd:usb1, serial 17: 267 0 IO-APIC-fasteoi HDA Intel, uhci_hcd:usb2, firewire_ohci 18: 0 0 IO-APIC-fasteoi uhci_hcd:usb3 19: 59 0 IO-APIC-fasteoi uhci_hcd:usb4, ehci_hcd:usb5 313: 479 0 PCI-MSI-edge iwl3945 314: 14316 0 PCI-MSI-edge ahci NMI: 0 0 Non-maskable interrupts LOC: 33699 282108 Local timer interrupts RES: 13468 34114 Rescheduling interrupts CAL: 59 169 function call interrupts TLB: 1204 1565 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts SPU: 0 0 Spurious interrupts ERR: 0 ------------ Linux version 2.6.24-rc2 (root@rico) (gcc version 4.2.2 (Gentoo 4.2.2 p1.0)) #1 SMP PREEMPT Tue Nov 13 14:39:58 CET 2007 Command line: root=/dev/sda1 video=vesafb:mtrr:3 vga=838 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fed0000 (usable) BIOS-e820: 000000003fed0000 - 000000003fedf000 (ACPI data) BIOS-e820: 000000003fedf000 - 000000003ff00000 (ACPI NVS) BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 261840) 1 entries of 256 used end_pfn_map = 1048576 DMI present. ACPI: RSDP 000F67B0, 0024 (r2 LENOVO) ACPI: XSDT 3FED1533, 0084 (r1 LENOVO TP-7C 2190 LTP 0) ACPI: FACP 3FED1600, 00F4 (r3 LENOVO TP-7C 2190 LNVO 1) ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] ACPI: DSDT 3FED195E, D3D4 (r1 LENOVO TP-7C 2190 MSFT 100000E) ACPI: FACS 3FEF4000, 0040 ACPI: SSDT 3FED17B4, 01AA (r1 LENOVO TP-7C 2190 MSFT 100000E) ACPI: ECDT 3FEDED32, 0052 (r1 LENOVO TP-7C 2190 LNVO 1) ACPI: TCPA 3FEDED84, 0032 (r2 LENOVO TP-7C 2190 LNVO 1) ACPI: APIC 3FEDEDB6, 0068 (r1 LENOVO TP-7C 2190 LNVO 1) ACPI: MCFG 3FEDEE1E, 003C (r1 LENOVO TP-7C 2190 LNVO 1) ACPI: HPET 3FEDEE5A, 0038 (r1 LENOVO TP-7C 2190 LNVO 1) ACPI: BOOT 3FEDEFD8, 0028 (r1 LENOVO TP-7C 2190 LTP 1) ACPI: SSDT 3FEF2655, 025F (r1 LENOVO TP-7C 2190 INTL 20050513) ACPI: SSDT 3FEF28B4, 00A6 (r1 LENOVO TP-7C 2190 INTL 20050513) ACPI: SSDT 3FEF295A, 04F7 (r1 LENOVO TP-7C 2190 INTL 20050513) ACPI: SSDT 3FEF2E51, 01D8 (r1 LENOVO TP-7C 2190 INTL 20050513) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 261840) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 261840 On node 0 totalpages: 261743 DMA zone: 56 pages used for memmap DMA zone: 1182 pages reserved DMA zone: 2761 pages, LIFO batch:0 DMA32 zone: 3523 pages used for memmap DMA32 zone: 254221 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 32496 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256982 Kernel command line: root=/dev/sda1 video=vesafb:mtrr:3 vga=838 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 hpet clockevent registered TSC calibrated against HPET Marking TSC unstable due to TSCs unsynchronized time.c: Detected 1828.750 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... Memory: 1026048k/1047360k available (2885k kernel code, 20740k reserved, 1180k data, 228k init) SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 3661.51 BogoMIPS (lpj=7323022) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 10390620 Detected 10.390 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3657.53 BogoMIPS (lpj=7315072) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 Brought up 2 CPUs net_namespace: 120 bytes NET: Registered protocol family 16 ACPI: ACPI Dock Station Driver ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added ACPI: bus type pci registered PCI: Using MMCONFIG at f0000000 - f3ffffff ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report DMAR:No DMAR devices found PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 Time: hpet clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff has been reserved system 00:00: iomem range 0xc4000-0xc7fff has been reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: ee000000-ee0fffff PREFETCH window: d8000000-dfffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: ee100000-ee1fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: 3000-4fff MEM window: ec000000-edffffff PREFETCH window: e4000000-e40fffff PCI: Bridge: 0000:00:1c.2 IO window: 5000-6fff MEM window: e8000000-e9ffffff PREFETCH window: e4100000-e41fffff PCI: Bridge: 0000:00:1c.3 IO window: 7000-8fff MEM window: ea000000-ebffffff PREFETCH window: e4200000-e42fffff PCI: Bus 22, cardbus bridge: 0000:15:00.0 IO window: 00009000-000090ff IO window: 00009400-000094ff PREFETCH window: e0000000-e3ffffff MEM window: 50000000-53ffffff PCI: Bridge: 0000:00:1e.0 IO window: 9000-cfff MEM window: e4300000-e7ffffff PREFETCH window: e0000000-e3ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x35 set to 0x1 IA-32 Microcode Update Driver: v1.14a io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20004100000, using 11550k, total 16384k vesafb: mode is 1400x1050x32, linelength=5632, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 Console: switching to colour frame buffer device 175x65 fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /devices/virtual/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/virtual/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /devices/virtual/input/input2 ACPI: Sleep Button (CM) [SLPB] input: Video Bus as /devices/virtual/input/input3 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) input: Video Bus as /devices/virtual/input/input4 ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) ACPI: SSDT 3FEF1D36, 0240 (r1 PmRef Cpu0Ist 100 INTL 20050513) ACPI: SSDT 3FEF1FFB, 065A (r1 PmRef Cpu0Cst 100 INTL 20050513) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 3FEF1C6E, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) ACPI: SSDT 3FEF1F76, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (59 C) ACPI: Thermal Zone [THM1] (59 C) Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 intel_rng: FWH not detected Linux agpgart interface v0.102 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled thinkpad_acpi: ThinkPad ACPI Extras v0.16 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7CETC9WW (2.19 ), EC 7CHT22WW-1.10 thinkpad_acpi: Lenovo ThinkPad R60 thinkpad_acpi: radio switch found; radios are enabled input: ThinkPad Extra Buttons as /devices/virtual/input/input5 tg3.c:v3.85 (October 18, 2007) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: Tigon3 [partno(BCM95751m) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d3:30:a3:c3 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] console [netcon0] enabled netconsole: network logging started ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x1) don't match, using nr_ports ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 314 ata2: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404580 irq 314 ata3: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404600 irq 314 ata4: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404680 irq 314 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: TOSHIBA MK1034GSX, AH201E, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 0) ata3: SATA link down (SStatus 0 SControl 0) ata4: SATA link down (SStatus 0 SControl 0) scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1034GS AH20 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 ata5.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, CX08, max UDMA/33 ata5.00: configured for UDMA/33 ata6: port disabled. ignoring. scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N CX08 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg1 type 5 Yenta: CardBus bridge found at 0000:15:00.0 [17aa:202f] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:15:00.0, mfunc 0x01001b22, devctl 0x64 Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 Socket status: 30000411 pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 rtc_cmos: probe of 00:07 failed with error -16 i2c /dev entries driver ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23 EDAC MC: Ver: 2.1.0 Nov 13 2007 cpuidle: using governor ladder Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 pccard: PCMCIA card inserted into slot 0 cs: memory probe 0xe0000000-0xe3ffffff: excluding 0xe0000000-0xe3ffffff cs: memory probe 0xe4300000-0xe7ffffff: excluding 0xe4300000-0xe46cffff 0xe4e70000-0xe523ffff 0xe5db0000-0xe617ffff 0xe6cf0000-0xe70bffff pcmcia: registering new device pcmcia0.0 pcmcia_resource: pcmcia_socket0: odd IO request: base 0x3f8 align 0x8 pcmcia_resource: pcmcia_socket0: odd IO request: base 0x2f8 align 0x8 pcmcia_resource: pcmcia_socket0: odd IO request: base 0x3e8 align 0x8 pcmcia_resource: pcmcia_socket0: odd IO request: base 0x2e8 align 0x8 0.0: ttyS0 at I/O 0x9100 (irq = 16) is a 16550A pcmcia: registering new device pcmcia0.1 pcmcia_resource: pcmcia_socket0: odd IO request: base 0x2f8 align 0x8 pcmcia_resource: pcmcia_socket0: odd IO request: base 0x3f8 align 0x8 pcmcia_resource: pcmcia_socket0: odd IO request: base 0x2e8 align 0x8 pcmcia_resource: pcmcia_socket0: odd IO request: base 0x3e8 align 0x8 0.1: ttyS1 at I/O 0x9108 (irq = 0) is a 16550A cpuidle: using governor menu TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 registered taskstats version 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Clocksource tsc unstable (delta = -368518838 ns) IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8 ReiserFS: sda1: found reiserfs format "3.6" with standard journal ReiserFS: sda1: using ordered data mode ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda1: checking transaction log (sda1) ReiserFS: sda1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 228k freed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:2010 PCI: Setting latency timer of device 0000:00:1b.0 to 64 USB Universal Host Controller Interface driver v3.0 iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds iwl3945: Copyright(c) 2003-2007 Intel Corporation ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-1: new low speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.0 to 64 iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection usb 1-1: configuration #1 chosen from 1 choice usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 input: Microsoft Microsoft Wireless Optical Mouse? 1.00 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input9 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse? 1.00] on usb-0000:00:1d.0-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels phy0: Selected rate control algorithm 'iwl-3945-rs' PCI: Enabling device 0000:15:00.1 (0000 -> 0002) ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:15:00.1 to 64 udev: renamed network interface wlan0 to ipw firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI version 1.10 usb 1-1: USB disconnect, address 2 firewire_core: created new fw device fw0 (0 config rom retries, S400) usb 1-1: new low speed USB device using uhci_hcd and address 3 usb 1-1: configuration #1 chosen from 1 choice input: Microsoft Microsoft Wireless Optical Mouse? 1.00 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input10 input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse? 1.00] on usb-0000:00:1d.0-1 usb 4-2: USB disconnect, address 2 usb 4-2: new full speed USB device using uhci_hcd and address 3 usb 4-2: configuration #1 chosen from 1 choice thinkpad_ec: thinkpad_ec 0.32 loaded. tp_smapi 0.32 loading... tp_smapi successfully loaded (smapi_port=0xb2). Adding 4883752k swap on /dev/sda2. Priority:-1 extents:1 across:4883752k ipw: Initial auth_alg=0 ipw: authenticate with AP 00:18:84:18:7f:05 ipw: RX authentication from 00:18:84:18:7f:05 (alg=0 transaction=2 status=0) ipw: authenticated ipw: associate with AP 00:18:84:18:7f:05 ipw: RX AssocResp from 00:18:84:18:7f:05 (capab=0x421 status=0 aid=1) ipw: associated ipw: switched to short barker preamble (BSSID=00:18:84:18:7f:05) ipw: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=20 ipw: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 ipw: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 ipw: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 ipw: Initial auth_alg=0 ipw: authenticate with AP 00:18:84:18:7f:05 ipw: RX authentication from 00:18:84:18:7f:05 (alg=0 transaction=2 status=0) ipw: authenticated ipw: associate with AP 00:18:84:18:7f:05 ipw: Initial auth_alg=0 ipw: authenticate with AP 00:18:84:18:7f:05 ipw: association frame received from 00:18:84:18:7f:05, but not in associate state - ignored iwl3945: Error sending REPLY_RXON: time out after 500ms. iwl3945: Error setting new configuration (-110). iwl3945: Error sending REPLY_RXON: time out after 500ms. iwl3945: Error setting new configuration (-110). PPP generic driver version 2.4.2 iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms. PPP BSD Compression module registered PPP Deflate Compression module registered - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/