Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:6 as permitted sender) client-ip=2620:137:e000::3:6;
From:   Praveenkumar I <quic_ipkumar@quicinc.com>
To:     <agross@kernel.org>, <andersson@kernel.org>,
        <konrad.dybcio@linaro.org>, <vkoul@kernel.org>,
        <kishon@kernel.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
        <gregkh@linuxfoundation.org>, <catalin.marinas@arm.com>,
        <will@kernel.org>, <p.zabel@pengutronix.de>,
        <geert+renesas@glider.be>, <arnd@arndb.de>,
        <neil.armstrong@linaro.org>, <nfraprado@collabora.com>,
        <u-kumar1@ti.com>, <peng.fan@nxp.com>, <quic_wcheng@quicinc.com>,
        <quic_varada@quicinc.com>, <linux-arm-msm@vger.kernel.org>,
        <linux-phy@lists.infradead.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>
CC:     <quic_kathirav@quicinc.com>, <quic_nsekar@quicinc.com>,
        <quic_srichara@quicinc.com>
Subject: [PATCH 6/8] arm64: dts: qcom: ipq5332: Add Super-Speed UNIPHY in USB node
Date:   Fri, 29 Sep 2023 14:12:07 +0530
Message-ID: <20230929084209.3033093-7-quic_ipkumar@quicinc.com>
In-Reply-To: <20230929084209.3033093-1-quic_ipkumar@quicinc.com>
References: <20230929084209.3033093-1-quic_ipkumar@quicinc.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Add UNIPHY node in USB to support Super-speed. As the SS PHY has
pipe clock, removed "qcom,select-utmi-as-pipe-clk" flag.

Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
---
 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 1813b9fa4bb5..8fe4e45bfc18 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -349,8 +349,6 @@ usb: usb@8af8800 {
 
 			resets = <&gcc GCC_USB_BCR>;
 
-			qcom,select-utmi-as-pipe-clk;
-
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -363,8 +361,8 @@ usb_dwc: usb@8a00000 {
 				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 				clock-names = "ref";
 				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-				phy-names = "usb2-phy";
-				phys = <&usbphy0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				phys = <&usbphy0>, <&usbphy1>;
 				tx-fifo-resize;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
-- 
2.34.1