Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) client-ip=2620:137:e000::3:2;
From:   Luca Weiss <luca.weiss@fairphone.com>
Date:   Fri, 29 Sep 2023 10:01:07 +0200
Subject: [PATCH 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI
 busses
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20230929-sc7280-cci-v1-3-16c7d386f062@fairphone.com>
References: <20230929-sc7280-cci-v1-0-16c7d386f062@fairphone.com>
In-Reply-To: <20230929-sc7280-cci-v1-0-16c7d386f062@fairphone.com>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Loic Poulain <loic.poulain@linaro.org>,
        Robert Foss <rfoss@kernel.org>,
        Andi Shyti <andi.shyti@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        cros-qcom-dts-watchers@chromium.org
Cc:     ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org,
        linux-i2c@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Luca Weiss <luca.weiss@fairphone.com>
Precedence: bulk

Enable the CCI busses where sensors are connected to.

Not covered here is the regulator used for pull-up on the I2C busses.
This would be pm8008_l6 (L6P).

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index c8e7e6689b20..3fc0b3f7dc31 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -388,6 +388,26 @@ vreg_bob: bob {
 	};
 };
 
+&cci0 {
+	status = "okay";
+};
+
+&cci0_i2c0 {
+	/* IMX800 @ 1a */
+};
+
+&cci0_i2c1 {
+	/* IMX858 @ 29 */
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c1 {
+	/* S5KJN1SQ03 @ 10 */
+};
+
 &dispcc {
 	/* Disable for now so simple-framebuffer continues working */
 	status = "disabled";

-- 
2.42.0