Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) client-ip=2620:137:e000::3:2;
From:   Konstantin Aladyshev <aladyshev22@gmail.com>
Cc:     minyard@acm.org, joel@jms.id.au, andrew@aj.id.au,
        avifishman70@gmail.com, tmaimon77@gmail.com, tali.perry1@gmail.com,
        venture@google.com, yuenn@google.com, benjaminfair@google.com,
        aladyshev22@gmail.com, jk@codeconstruct.com.au,
        matt@codeconstruct.com.au, davem@davemloft.net,
        edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
        openipmi-developer@lists.sourceforge.net,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-aspeed@lists.ozlabs.org, openbmc@lists.ozlabs.org,
        netdev@vger.kernel.org
Subject: [PATCH v2 2/3] ipmi: Create header with KCS interface defines
Date:   Mon,  2 Oct 2023 17:34:40 +0300
Message-Id: <20231002143441.545-3-aladyshev22@gmail.com>
In-Reply-To: <20231002143441.545-1-aladyshev22@gmail.com>
References: <20231002143441.545-1-aladyshev22@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
To:     unlisted-recipients:; (no To-header on input)
Precedence: bulk

Some definitions from the current kcs_bmc_cdev_ipmi driver can be also
utilized by the MTCP KCS binding driver. Move such definitions to the
common header file.

Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
---
 drivers/char/ipmi/kcs_bmc_cdev_ipmi.c | 71 +-----------------------
 include/linux/ipmi_kcs.h              | 80 +++++++++++++++++++++++++++
 2 files changed, 81 insertions(+), 70 deletions(-)
 create mode 100644 include/linux/ipmi_kcs.h

diff --git a/drivers/char/ipmi/kcs_bmc_cdev_ipmi.c b/drivers/char/ipmi/kcs_bmc_cdev_ipmi.c
index bf1001130a6c..f158f676114c 100644
--- a/drivers/char/ipmi/kcs_bmc_cdev_ipmi.c
+++ b/drivers/char/ipmi/kcs_bmc_cdev_ipmi.c
@@ -8,6 +8,7 @@
 #include <linux/errno.h>
 #include <linux/io.h>
 #include <linux/ipmi_bmc.h>
+#include <linux/ipmi_kcs.h>
 #include <linux/kcs_bmc_client.h>
 #include <linux/list.h>
 #include <linux/miscdevice.h>
@@ -19,53 +20,6 @@
 #include <linux/slab.h>
 
 
-/* Different phases of the KCS BMC module.
- *  KCS_PHASE_IDLE:
- *            BMC should not be expecting nor sending any data.
- *  KCS_PHASE_WRITE_START:
- *            BMC is receiving a WRITE_START command from system software.
- *  KCS_PHASE_WRITE_DATA:
- *            BMC is receiving a data byte from system software.
- *  KCS_PHASE_WRITE_END_CMD:
- *            BMC is waiting a last data byte from system software.
- *  KCS_PHASE_WRITE_DONE:
- *            BMC has received the whole request from system software.
- *  KCS_PHASE_WAIT_READ:
- *            BMC is waiting the response from the upper IPMI service.
- *  KCS_PHASE_READ:
- *            BMC is transferring the response to system software.
- *  KCS_PHASE_ABORT_ERROR1:
- *            BMC is waiting error status request from system software.
- *  KCS_PHASE_ABORT_ERROR2:
- *            BMC is waiting for idle status afer error from system software.
- *  KCS_PHASE_ERROR:
- *            BMC has detected a protocol violation at the interface level.
- */
-enum kcs_ipmi_phases {
-	KCS_PHASE_IDLE,
-
-	KCS_PHASE_WRITE_START,
-	KCS_PHASE_WRITE_DATA,
-	KCS_PHASE_WRITE_END_CMD,
-	KCS_PHASE_WRITE_DONE,
-
-	KCS_PHASE_WAIT_READ,
-	KCS_PHASE_READ,
-
-	KCS_PHASE_ABORT_ERROR1,
-	KCS_PHASE_ABORT_ERROR2,
-	KCS_PHASE_ERROR
-};
-
-/* IPMI 2.0 - Table 9-4, KCS Interface Status Codes */
-enum kcs_ipmi_errors {
-	KCS_NO_ERROR                = 0x00,
-	KCS_ABORTED_BY_COMMAND      = 0x01,
-	KCS_ILLEGAL_CONTROL_CODE    = 0x02,
-	KCS_LENGTH_ERROR            = 0x06,
-	KCS_UNSPECIFIED_ERROR       = 0xFF
-};
-
 struct kcs_bmc_ipmi {
 	struct list_head entry;
 
@@ -95,29 +49,6 @@ struct kcs_bmc_ipmi {
 
 #define KCS_MSG_BUFSIZ    1000
 
-#define KCS_ZERO_DATA     0
-
-/* IPMI 2.0 - Table 9-1, KCS Interface Status Register Bits */
-#define KCS_STATUS_STATE(state) (state << 6)
-#define KCS_STATUS_STATE_MASK   GENMASK(7, 6)
-#define KCS_STATUS_CMD_DAT      BIT(3)
-#define KCS_STATUS_SMS_ATN      BIT(2)
-#define KCS_STATUS_IBF          BIT(1)
-#define KCS_STATUS_OBF          BIT(0)
-
-/* IPMI 2.0 - Table 9-2, KCS Interface State Bits */
-enum kcs_states {
-	IDLE_STATE  = 0,
-	READ_STATE  = 1,
-	WRITE_STATE = 2,
-	ERROR_STATE = 3,
-};
-
-/* IPMI 2.0 - Table 9-3, KCS Interface Control Codes */
-#define KCS_CMD_GET_STATUS_ABORT  0x60
-#define KCS_CMD_WRITE_START       0x61
-#define KCS_CMD_WRITE_END         0x62
-#define KCS_CMD_READ_BYTE         0x68
 
 static inline void set_state(struct kcs_bmc_ipmi *priv, u8 state)
 {
diff --git a/include/linux/ipmi_kcs.h b/include/linux/ipmi_kcs.h
new file mode 100644
index 000000000000..30c4b6e4d689
--- /dev/null
+++ b/include/linux/ipmi_kcs.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015-2018, Intel Corporation.
+ */
+
+#ifndef __IPMI_KCS_H__
+#define __IPMI_KCS_H__
+
+/* Different phases of the KCS BMC module.
+ *  KCS_PHASE_IDLE:
+ *            BMC should not be expecting nor sending any data.
+ *  KCS_PHASE_WRITE_START:
+ *            BMC is receiving a WRITE_START command from system software.
+ *  KCS_PHASE_WRITE_DATA:
+ *            BMC is receiving a data byte from system software.
+ *  KCS_PHASE_WRITE_END_CMD:
+ *            BMC is waiting a last data byte from system software.
+ *  KCS_PHASE_WRITE_DONE:
+ *            BMC has received the whole request from system software.
+ *  KCS_PHASE_WAIT_READ:
+ *            BMC is waiting the response from the upper IPMI service.
+ *  KCS_PHASE_READ:
+ *            BMC is transferring the response to system software.
+ *  KCS_PHASE_ABORT_ERROR1:
+ *            BMC is waiting error status request from system software.
+ *  KCS_PHASE_ABORT_ERROR2:
+ *            BMC is waiting for idle status afer error from system software.
+ *  KCS_PHASE_ERROR:
+ *            BMC has detected a protocol violation at the interface level.
+ */
+enum kcs_ipmi_phases {
+	KCS_PHASE_IDLE,
+
+	KCS_PHASE_WRITE_START,
+	KCS_PHASE_WRITE_DATA,
+	KCS_PHASE_WRITE_END_CMD,
+	KCS_PHASE_WRITE_DONE,
+
+	KCS_PHASE_WAIT_READ,
+	KCS_PHASE_READ,
+
+	KCS_PHASE_ABORT_ERROR1,
+	KCS_PHASE_ABORT_ERROR2,
+	KCS_PHASE_ERROR
+};
+
+/* IPMI 2.0 - Table 9-4, KCS Interface Status Codes */
+enum kcs_ipmi_errors {
+	KCS_NO_ERROR                = 0x00,
+	KCS_ABORTED_BY_COMMAND      = 0x01,
+	KCS_ILLEGAL_CONTROL_CODE    = 0x02,
+	KCS_LENGTH_ERROR            = 0x06,
+	KCS_UNSPECIFIED_ERROR       = 0xFF
+};
+
+#define KCS_ZERO_DATA     0
+
+/* IPMI 2.0 - Table 9-1, KCS Interface Status Register Bits */
+#define KCS_STATUS_STATE(state) (state << 6)
+#define KCS_STATUS_STATE_MASK   GENMASK(7, 6)
+#define KCS_STATUS_CMD_DAT      BIT(3)
+#define KCS_STATUS_SMS_ATN      BIT(2)
+#define KCS_STATUS_IBF          BIT(1)
+#define KCS_STATUS_OBF          BIT(0)
+
+/* IPMI 2.0 - Table 9-2, KCS Interface State Bits */
+enum kcs_states {
+	IDLE_STATE  = 0,
+	READ_STATE  = 1,
+	WRITE_STATE = 2,
+	ERROR_STATE = 3,
+};
+
+/* IPMI 2.0 - Table 9-3, KCS Interface Control Codes */
+#define KCS_CMD_GET_STATUS_ABORT  0x60
+#define KCS_CMD_WRITE_START       0x61
+#define KCS_CMD_WRITE_END         0x62
+#define KCS_CMD_READ_BYTE         0x68
+
+#endif /* __IPMI_KCS_H__ */
-- 
2.25.1