Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) client-ip=23.128.96.34;
From:   Mateusz Majewski <m.majewski2@samsung.com>
To:     linux-pm@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc:     Mateusz Majewski <m.majewski2@samsung.com>,
        Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        "Rafael J. Wysocki" <rafael@kernel.org>,
        Daniel Lezcano <daniel.lezcano@linaro.org>,
        Amit Kucheria <amitk@kernel.org>,
        Zhang Rui <rui.zhang@intel.com>,
        Alim Akhtar <alim.akhtar@samsung.com>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCH v3 7/8] thermal: exynos: split initialization of TMU and the
 thermal zone
Date:   Tue,  3 Oct 2023 13:16:33 +0200
Message-ID: <20231003111638.241542-8-m.majewski2@samsung.com>
In-Reply-To: <20231003111638.241542-1-m.majewski2@samsung.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="utf-8"
CMS-TYPE: 201P
References: <20231003111638.241542-1-m.majewski2@samsung.com>
        <CGME20231003111713eucas1p27fcc64df0091b6097461f28b05bf772a@eucas1p2.samsung.com>
Precedence: bulk

This will be needed in the future, as the thermal zone subsystem might
call our callbacks right after devm_thermal_of_zone_register. Currently
we just make get_temp return EAGAIN in such case, but this will not be
possible with state-modifying callbacks, for instance set_trips.

Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
---
v1 -> v2: We take clocks into account; exynos_tmu_initialize needs both
  clocks, as tmu_initialize might use the base_second registers. However,
  exynos_thermal_zone_configure only needs clk.

 drivers/thermal/samsung/exynos_tmu.c | 104 +++++++++++++++------------
 1 file changed, 60 insertions(+), 44 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 7138e001fa5a..343e27c61528 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -251,25 +251,8 @@ static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
 static int exynos_tmu_initialize(struct platform_device *pdev)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
-	struct thermal_zone_device *tzd = data->tzd;
-	int num_trips = thermal_zone_get_num_trips(tzd);
 	unsigned int status;
-	int ret = 0, temp;
-
-	ret = thermal_zone_get_crit_temp(tzd, &temp);
-	if (ret && data->soc != SOC_ARCH_EXYNOS5433) { /* FIXME */
-		dev_err(&pdev->dev,
-			"No CRITICAL trip point defined in device tree!\n");
-		goto out;
-	}
-
-	if (num_trips > data->ntrip) {
-		dev_info(&pdev->dev,
-			 "More trip points than supported by this TMU.\n");
-		dev_info(&pdev->dev,
-			 "%d trip points should be configured in polling mode.\n",
-			 num_trips - data->ntrip);
-	}
+	int ret = 0;
 
 	mutex_lock(&data->lock);
 	clk_enable(data->clk);
@@ -280,32 +263,63 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 	if (!status) {
 		ret = -EBUSY;
 	} else {
-		int i, ntrips =
-			min_t(int, num_trips, data->ntrip);
-
 		data->tmu_initialize(pdev);
-
-		/* Write temperature code for rising and falling threshold */
-		for (i = 0; i < ntrips; i++) {
-
-			struct thermal_trip trip;
-
-			ret = thermal_zone_get_trip(tzd, i, &trip);
-			if (ret)
-				goto err;
-
-			data->tmu_set_trip_temp(data, i, trip.temperature / MCELSIUS);
-			data->tmu_set_trip_hyst(data, i, trip.temperature / MCELSIUS,
-						trip.hysteresis / MCELSIUS);
-		}
-
 		data->tmu_clear_irqs(data);
 	}
+
+	mutex_unlock(&data->lock);
+	clk_disable(data->clk);
+	if (!IS_ERR(data->clk_sec))
+		clk_disable(data->clk_sec);
+
+	return ret;
+}
+
+static int exynos_thermal_zone_configure(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	struct thermal_zone_device *tzd = data->tzd;
+	int i, num_trips = thermal_zone_get_num_trips(tzd);
+	int ret = 0, temp;
+
+	ret = thermal_zone_get_crit_temp(tzd, &temp);
+
+	if (ret && data->soc != SOC_ARCH_EXYNOS5433) { /* FIXME */
+		dev_err(&pdev->dev,
+			"No CRITICAL trip point defined in device tree!\n");
+		goto out;
+	}
+
+	mutex_lock(&data->lock);
+
+	if (num_trips > data->ntrip) {
+		dev_info(&pdev->dev,
+			 "More trip points than supported by this TMU.\n");
+		dev_info(&pdev->dev,
+			 "%d trip points should be configured in polling mode.\n",
+			 num_trips - data->ntrip);
+	}
+
+	clk_enable(data->clk);
+
+	num_trips = min_t(int, num_trips, data->ntrip);
+
+	/* Write temperature code for rising and falling threshold */
+	for (i = 0; i < num_trips; i++) {
+		struct thermal_trip trip;
+
+		ret = thermal_zone_get_trip(tzd, i, &trip);
+		if (ret)
+			goto err;
+
+		data->tmu_set_trip_temp(data, i, trip.temperature / MCELSIUS);
+		data->tmu_set_trip_hyst(data, i, trip.temperature / MCELSIUS,
+					trip.hysteresis / MCELSIUS);
+	}
+
 err:
 	clk_disable(data->clk);
 	mutex_unlock(&data->lock);
-	if (!IS_ERR(data->clk_sec))
-		clk_disable(data->clk_sec);
 out:
 	return ret;
 }
@@ -1044,10 +1058,12 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 		break;
 	}
 
-	/*
-	 * data->tzd must be registered before calling exynos_tmu_initialize(),
-	 * requesting irq and calling exynos_tmu_control().
-	 */
+	ret = exynos_tmu_initialize(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize TMU\n");
+		return ret;
+	}
+
 	data->tzd = devm_thermal_of_zone_register(&pdev->dev, 0, data,
 						  &exynos_sensor_ops);
 	if (IS_ERR(data->tzd)) {
@@ -1058,9 +1074,9 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 		goto err_sclk;
 	}
 
-	ret = exynos_tmu_initialize(pdev);
+	ret = exynos_thermal_zone_configure(pdev);
 	if (ret) {
-		dev_err(&pdev->dev, "Failed to initialize TMU\n");
+		dev_err(&pdev->dev, "Failed to configure the thermal zone\n");
 		goto err_sclk;
 	}
 
-- 
2.42.0