Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:5 as permitted sender) client-ip=2620:137:e000::3:5;
From:   Stephan Gerhold <stephan@gerhold.net>
Date:   Tue, 03 Oct 2023 15:18:21 +0200
Subject: [PATCH v2 03/14] arm64: dts: qcom: msm8939: Add QDSP6
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20231003-msm8916-modem-v2-3-61b684be55c0@gerhold.net>
References: <20231003-msm8916-modem-v2-0-61b684be55c0@gerhold.net>
In-Reply-To: <20231003-msm8916-modem-v2-0-61b684be55c0@gerhold.net>
To:     Bjorn Andersson <andersson@kernel.org>
Cc:     Andy Gross <agross@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, phone-devel@vger.kernel.org,
        ~postmarketos/upstreaming@lists.sr.ht,
        Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
        Stephan Gerhold <stephan@gerhold.net>
Precedence: bulk

MSM8939 does not have a dedicated ADSP. Instead, the audio services via
APR are also implemented by the modem DSP. Audio can be either routed
via the modem DSP (necessary for voice call audio etc) or directly sent
to the LPASS hardware (currently used by DB410c). Bypassing QDSP6 audio
is only possible with special firmware (on DB410c) or when the modem
DSP is completely disabled.

Add the typical nodes for QDSP6 audio to msm8939.dtsi. The apr node is
disabled by default to avoid changing behavior for devices like
apq8039-t2 that use the bypassed audio path.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 arch/arm64/boot/dts/qcom/msm8939.dtsi | 49 +++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 65c68e0e88d5..95610a32750a 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8939.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -1615,6 +1616,54 @@ smd-edge {
 				qcom,remote-pid = <1>;
 
 				label = "hexagon";
+
+				apr: apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+
+					q6core: service@3 {
+						compatible = "qcom,q6core";
+						reg = <APR_SVC_ADSP_CORE>;
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
 			};
 		};
 

-- 
2.42.0