Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:5 as permitted sender) client-ip=2620:137:e000::3:5;
From:   Stephan Gerhold <stephan@gerhold.net>
Date:   Tue, 03 Oct 2023 15:18:31 +0200
Subject: [PATCH v2 13/14] arm64: dts: qcom: msm8916-samsung-j5: Add sound
 and modem
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20231003-msm8916-modem-v2-13-61b684be55c0@gerhold.net>
References: <20231003-msm8916-modem-v2-0-61b684be55c0@gerhold.net>
In-Reply-To: <20231003-msm8916-modem-v2-0-61b684be55c0@gerhold.net>
To:     Bjorn Andersson <andersson@kernel.org>
Cc:     Andy Gross <agross@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, phone-devel@vger.kernel.org,
        ~postmarketos/upstreaming@lists.sr.ht,
        Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
        Stephan Gerhold <stephan@gerhold.net>,
        "Lin, Meng-Bo" <linmengbo0689@protonmail.com>,
        Markuss Broks <markuss.broks@gmail.com>
Precedence: bulk

From: "Lin, Meng-Bo" <linmengbo0689@protonmail.com>

Enable sound and modem for the Samsung J5 smartphones. The setup is
similar to most MSM8916 devices, i.e.:

 - QDSP6 audio
 - Speaker/earpiece/headphones/microphones via digital/analog codec
   in MSM8916/PM8916
 - WWAN Internet via BAM-DMUX

except:

 - There is no secondary microphone, so a different "model" is used to
   differentiate that in the UCM configuration.
 - Samsung-specific audio jack detection (not supported yet)

Co-developed-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: "Lin, Meng-Bo" <linmengbo0689@protonmail.com>
[Stephan: Add consistent commit message]
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi | 14 ++++++++++++++
 arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts         |  4 ++++
 2 files changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
index fe59be3505fe..5ca2ada266f4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -135,6 +137,10 @@ &blsp_uart2 {
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5800000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -154,6 +160,14 @@ &sdhc_2 {
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	model = "msm8916-1mic";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	extcon = <&muic>, <&muic>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
index 58c2f5a70e78..ba8650971d6a 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
@@ -19,6 +19,10 @@ &blsp_i2c5 {
 	status = "disabled";
 };
 
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+};
+
 &touchscreen {
 	/* FIXME: Missing sm5703-mfd driver to power up vdd-supply */
 };

-- 
2.42.0