Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.37 as permitted sender) client-ip=23.128.96.37;
Feedback-ID: i787e41f1:Fastmail
Date:   Wed, 4 Oct 2023 14:46:17 +0200
From:   Greg KH <greg@kroah.com>
To:     Rohit Agarwal <quic_rohiagar@quicinc.com>
Cc:     Stephen Rothwell <sfr@canb.auug.org.au>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        Linux Next Mailing List <linux-next@vger.kernel.org>
Subject: Re: linux-next: build failure after merge of the usb tree
Message-ID: <2023100445-cymbal-glade-52c8@gregkh>
References: <20231004132247.01c3bfeb@canb.auug.org.au>
 <2023100410-concave-explore-95bf@gregkh>
 <e26b26ff-9e88-4455-9172-1afb520583e7@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <e26b26ff-9e88-4455-9172-1afb520583e7@quicinc.com>
Precedence: bulk

On Wed, Oct 04, 2023 at 12:17:27PM +0530, Rohit Agarwal wrote:
> 
> On 10/4/2023 12:13 PM, Greg KH wrote:
> > On Wed, Oct 04, 2023 at 01:22:47PM +1100, Stephen Rothwell wrote:
> > > Hi all,
> > > 
> > > After merging the usb tree, today's linux-next build (x86_64 allmodconfig)
> > > failed like this:
> > > 
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:156:43: error: 'QPHY_V6_PCS_SW_RESET' undeclared here (not in a function); did you mean 'QPHY_V2_PCS_SW_RESET'?
> > >    156 |         [QPHY_SW_RESET]                 = QPHY_V6_PCS_SW_RESET,
> > >        |                                           ^~~~~~~~~~~~~~~~~~~~
> > >        |                                           QPHY_V2_PCS_SW_RESET
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:157:43: error: 'QPHY_V6_PCS_START_CONTROL' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_START_CONTROL'?
> > >    157 |         [QPHY_START_CTRL]               = QPHY_V6_PCS_START_CONTROL,
> > >        |                                           ^~~~~~~~~~~~~~~~~~~~~~~~~
> > >        |                                           QPHY_V3_PCS_START_CONTROL
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:158:43: error: 'QPHY_V6_PCS_PCS_STATUS1' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_PCS_STATUS1'?
> > >    158 |         [QPHY_PCS_STATUS]               = QPHY_V6_PCS_PCS_STATUS1,
> > >        |                                           ^~~~~~~~~~~~~~~~~~~~~~~
> > >        |                                           QPHY_V5_PCS_PCS_STATUS1
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:159:43: error: 'QPHY_V6_PCS_POWER_DOWN_CONTROL' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_POWER_DOWN_CONTROL'?
> > >    159 |         [QPHY_PCS_POWER_DOWN_CONTROL]   = QPHY_V6_PCS_POWER_DOWN_CONTROL,
> > >        |                                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > >        |                                           QPHY_V3_PCS_POWER_DOWN_CONTROL
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:162:43: error: 'QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL'?
> > >    162 |         [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL,
> > >        |                                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > >        |                                           QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:163:44: error: 'QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR'?
> > >    163 |         [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
> > >        |                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > >        |                                            QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:991:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG1'?
> > >    991 |         QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG1, 0xc4),
> > >        |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > >     78 |                 .offset = o,            \
> > >        |                           ^
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:992:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG2' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_LOCK_DETECT_CONFIG2'?
> > >    992 |         QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG2, 0x89),
> > >        |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > >     78 |                 .offset = o,            \
> > >        |                           ^
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:993:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG3' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG3'?
> > >    993 |         QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG3, 0x20),
> > >        |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > >     78 |                 .offset = o,            \
> > >        |                           ^
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:994:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG6' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG6'?
> > >    994 |         QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG6, 0x13),
> > >        |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > >     78 |                 .offset = o,            \
> > >        |                           ^
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:997:26: error: 'QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L'?
> > >    997 |         QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> > >        |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > >     78 |                 .offset = o,            \
> > >        |                           ^
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:998:26: error: 'QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H'?
> > >    998 |         QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> > >        |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > >     78 |                 .offset = o,            \
> > >        |                           ^
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:999:26: error: 'QPHY_V6_PCS_CDR_RESET_TIME' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_CDR_RESET_TIME'?
> > >    999 |         QMP_PHY_INIT_CFG(QPHY_V6_PCS_CDR_RESET_TIME, 0x0a),
> > >        |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > >     78 |                 .offset = o,            \
> > >        |                           ^
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1000:26: error: 'QPHY_V6_PCS_ALIGN_DETECT_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_ALIGN_DETECT_CONFIG1'?
> > >   1000 |         QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> > >        |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > >     78 |                 .offset = o,            \
> > >        |                           ^
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1001:26: error: 'QPHY_V6_PCS_ALIGN_DETECT_CONFIG2' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_ALIGN_DETECT_CONFIG2'?
> > >   1001 |         QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> > >        |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > >     78 |                 .offset = o,            \
> > >        |                           ^
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1003:26: error: 'QPHY_V6_PCS_EQ_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_EQ_CONFIG1'?
> > >   1003 |         QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG1, 0x4b),
> > >        |                          ^~~~~~~~~~~~~~~~~~~~~~
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > >     78 |                 .offset = o,            \
> > >        |                           ^
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1004:26: error: 'QPHY_V6_PCS_EQ_CONFIG5' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_EQ_CONFIG5'?
> > >   1004 |         QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG5, 0x10),
> > >        |                          ^~~~~~~~~~~~~~~~~~~~~~
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > >     78 |                 .offset = o,            \
> > >        |                           ^
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1008:26: error: 'QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL'?
> > >   1008 |         QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> > >        |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > >     78 |                 .offset = o,            \
> > >        |                           ^
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1009:26: error: 'QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2'?
> > >   1009 |         QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> > >        |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > >     78 |                 .offset = o,            \
> > >        |                           ^
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1010:26: error: 'QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_L'?
> > >   1010 |         QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
> > >        |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > >     78 |                 .offset = o,            \
> > >        |                           ^
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1011:26: error: 'QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H'?
> > >   1011 |         QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
> > >        |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > >     78 |                 .offset = o,            \
> > >        |                           ^
> > > 
> > > Caused by commit
> > > 
> > >    685dbd1b2306 ("phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support")
> > > 
> > > I have used the usb tree from next-20231003 for today.
> > Thanks, I've now reverted this from my tree.
> As mentioned in the cover letter of these changes, the series was dependent
> on the other submitted series [1], [2].

Ah, I missed that, I almost never read cover letters :)

> Can you also pick these series [1], [2] to resolve this build failures.
> [1] https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
> [2] https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/

How about you just send this change with these others, or all of them as
one big series so they can be applied in the proper order?

thanks,

greg k-h