Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) client-ip=2620:137:e000::3:2;
MIME-Version: 1.0
References: <20230929053915.1530607-1-claudiu.beznea@bp.renesas.com> <20230929053915.1530607-15-claudiu.beznea@bp.renesas.com>
In-Reply-To: <20230929053915.1530607-15-claudiu.beznea@bp.renesas.com>
From:   Geert Uytterhoeven <geert@linux-m68k.org>
Date:   Wed, 4 Oct 2023 14:52:28 +0200
Message-ID: <CAMuHMdX17ZwHpCC75Xr4BxK69+1bumbDFYrYqLWLaybRkoRtXg@mail.gmail.com>
Subject: Re: [PATCH v2 14/28] pinctrl: renesas: rzg2l: index all registers
 based on port offset
To:     Claudiu <claudiu.beznea@tuxon.dev>
Cc:     mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
        linus.walleij@linaro.org, gregkh@linuxfoundation.org,
        jirislaby@kernel.org, magnus.damm@gmail.com,
        catalin.marinas@arm.com, will@kernel.org,
        quic_bjorande@quicinc.com, konrad.dybcio@linaro.org, arnd@arndb.de,
        neil.armstrong@linaro.org, prabhakar.mahadev-lad.rj@bp.renesas.com,
        biju.das.jz@bp.renesas.com, linux-renesas-soc@vger.kernel.org,
        linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
        linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 8BIT
Precedence: bulk

Hi Claudiu,

On Fri, Sep 29, 2023 at 7:39 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> To get address that needs to be read/write for specific port
> functionalities the P(), PM(), PMC(), PFC(), PIN(), IOLH() IEN(), ISEL()
> macros are used. Some of these macros received as argument the hardware
> port identifier, some hardware port offset address (e.g. ISEL() received
> port identifier, IOLH() received port offset address). This makes hard to
> extend the current driver for SoCs were port identifiers are not continuous
> in memory map of pin controller. This is the case for RZ/G3S pin controller
> were ports are mapped as follows:
>
> port offset    port identifier
> -----------    ---------------
> 0x20           P0
> 0x21           P5
> 0x22           P6
> 0x23           P11
> 0x24           P12
> 0x25           P13
> 0x26           P14
> 0x27           P15
> 0x28           P16
> 0x29           P17
> 0x2a           P18
> 0x30           P1
> 0x31           P2
> 0x32           P3
> 0x33           P4
> 0x34           P7
> 0x35           P8
> 0x36           P8
> 0x37           P10
>
> To make this achievable change all the above macros used to get the address
> of a port register for specific port functionality based on port hardware
> address. Shortly, all the above macros will get as argument the port
> offset address listed in the above table.
>
> With this RZG2L_SINGLE_PIN_GET_PORT_OFFSET(), RZG2L_PIN_ID_TO_PORT_OFFSET()
> and RZG2L_GPIO_PORT_GET_INDEX() were replaced by
> RZG2L_PIN_CFG_TO_PORT_OFFSET(), RZG2L_SINGLE_PIN_GET_CFGS() and
> RZG2L_GPIO_PORT_GET_CFGS() were replaced by RZG2L_PIN_CFG_TO_CAPS().
>
> Also rzg2l_pinctrl_set_pfc_mode() don't need port argument anymore.
> Also rzg2l_gpio_direction_input() and rzg2l_gpio_direction_output() don't
> need to translate port and bit locally as this can be done by
> rzg2l_gpio_set_direction().
>
> To use the same naming for port, bit/pin and register offset the
> port_offset variable names in different places was replaced by variable
> named off and there is no need to initialize anymore cfg and bit in
> different code places.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
>
> Changes in v2:
> - mentioned in commit description about the replacement of
>   RZG2L_GPIO_PORT_GET_INDEX() with RZG2L_PIN_CFG_TO_PORT_OFFSET()
> - moved variable declaration inside for()
> - got rid of local variable and used directly RZG2L_PIN_ID_TO_PORT() in
>   debug message from rzg2l_pinctrl_set_mux() function
> - collected tags

Thanks for the update! Sill queue in renesas-pinctrl-for-v6.7.

> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -202,9 +202,11 @@ static int rzg2l_pinctrl_set_mux(struct pinctrl_dev *pctldev,
>                                  unsigned int group_selector)
>  {
>         struct rzg2l_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> +       const struct pinctrl_pin_desc *pin_desc;
> +       unsigned int *psel_val, *pin_data;
>         struct function_desc *func;
> -       unsigned int i, *psel_val;
>         struct group_desc *group;
> +       u32 pin, off;
>         int *pins;
>
>         func = pinmux_generic_get_function(pctldev, func_selector);
> @@ -217,12 +219,17 @@ static int rzg2l_pinctrl_set_mux(struct pinctrl_dev *pctldev,
>         psel_val = func->data;
>         pins = group->pins;
>
> -       for (i = 0; i < group->num_pins; i++) {
> -               dev_dbg(pctrl->dev, "port:%u pin: %u PSEL:%u\n",
> -                       RZG2L_PIN_ID_TO_PORT(pins[i]), RZG2L_PIN_ID_TO_PIN(pins[i]),
> -                       psel_val[i]);
> -               rzg2l_pinctrl_set_pfc_mode(pctrl, RZG2L_PIN_ID_TO_PORT(pins[i]),
> -                                          RZG2L_PIN_ID_TO_PIN(pins[i]), psel_val[i]);
> +       for (unsigned int i = 0; i < group->num_pins; i++) {
> +               pin_desc = &pctrl->desc.pins[pins[i]];
> +               pin_data = pin_desc->drv_data;
> +
> +               pin = RZG2L_PIN_ID_TO_PIN(pins[i]);
> +               off = RZG2L_PIN_CFG_TO_PORT_OFFSET(*pin_data);

In my comments on v1, I actually meant to combine these assignments
to variables with the variable declarations.  I will handle that while applying.

> +
> +               dev_dbg(pctrl->dev, "port:%u pin: %u off:%x PSEL:%u\n",
> +                       RZG2L_PIN_ID_TO_PORT(pins[i]), pin, off, psel_val[i]);
> +
> +               rzg2l_pinctrl_set_pfc_mode(pctrl, pin, off, psel_val[i]);
>         }
>
>         return 0;

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds