Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.37 as permitted sender) client-ip=23.128.96.37;
From:   =?utf-8?q?Duje_Mihanovi=C4=87?= <duje.mihanovic@skole.hr>
Date:   Wed, 04 Oct 2023 16:56:29 +0200
Subject: [PATCH RFC v5 5/6] ARM: pxa: Convert gumstix Bluetooth to GPIO
 descriptors
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
Message-Id: <20231004-pxa-gpio-v5-5-d99ae6fceea8@skole.hr>
References: <20231004-pxa-gpio-v5-0-d99ae6fceea8@skole.hr>
In-Reply-To: <20231004-pxa-gpio-v5-0-d99ae6fceea8@skole.hr>
To:     Daniel Mack <daniel@zonque.org>,
        Haojian Zhuang <haojian.zhuang@gmail.com>,
        Robert Jarzmik <robert.jarzmik@free.fr>,
        Russell King <linux@armlinux.org.uk>,
        Alan Stern <stern@rowland.harvard.edu>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Bartosz Golaszewski <brgl@bgdev.pl>,
        Andy Shevchenko <andy@kernel.org>,
        Dmitry Torokhov <dmitry.torokhov@gmail.com>,
        Mark Brown <broonie@kernel.org>
Cc:     linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-usb@vger.kernel.org, linux-gpio@vger.kernel.org,
        linux-input@vger.kernel.org, linux-spi@vger.kernel.org,
        =?utf-8?q?Duje_Mihanovi=C4=87?= <duje.mihanovic@skole.hr>
Precedence: bulk

Gumstix still uses the legacy GPIO interface for resetting the Bluetooth
device.

Convert it to use the GPIO descriptor interface.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 arch/arm/mach-pxa/gumstix.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index c9f0f62187bd..0bca6e2c80a9 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -20,8 +20,8 @@
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/gpio/consumer.h>
 #include <linux/gpio/machine.h>
-#include <linux/gpio.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 
@@ -129,6 +129,11 @@ static void gumstix_udc_init(void)
 #endif
 
 #ifdef CONFIG_BT
+GPIO_LOOKUP_SINGLE(gumstix_bt_gpio_table, "pxa2xx-uart.1", "pxa-gpio",
+		GPIO_GUMSTIX_BTRESET, "BTRST", GPIO_ACTIVE_LOW);
+
+static struct gpio_desc *bt_reset;
+
 /* Normally, the bootloader would have enabled this 32kHz clock but many
 ** boards still have u-boot 1.1.4 so we check if it has been turned on and
 ** if not, we turn it on with a warning message. */
@@ -153,24 +158,19 @@ static void gumstix_setup_bt_clock(void)
 
 static void __init gumstix_bluetooth_init(void)
 {
-	int err;
+	gpiod_add_lookup_table(&gumstix_bt_gpio_table);
 
 	gumstix_setup_bt_clock();
 
-	err = gpio_request(GPIO_GUMSTIX_BTRESET, "BTRST");
-	if (err) {
+	bt_reset = gpiod_get(&pxa_device_btuart.dev, "BTRST", GPIOD_OUT_HIGH);
+	if (IS_ERR(bt_reset)) {
 		pr_err("gumstix: failed request gpio for bluetooth reset\n");
 		return;
 	}
 
-	err = gpio_direction_output(GPIO_GUMSTIX_BTRESET, 1);
-	if (err) {
-		pr_err("gumstix: can't reset bluetooth\n");
-		return;
-	}
-	gpio_set_value(GPIO_GUMSTIX_BTRESET, 0);
+	gpiod_set_value(bt_reset, 1);
 	udelay(100);
-	gpio_set_value(GPIO_GUMSTIX_BTRESET, 1);
+	gpiod_set_value(bt_reset, 0);
 }
 #else
 static void gumstix_bluetooth_init(void)

-- 
2.42.0