Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.37 as permitted sender) client-ip=23.128.96.37;
MIME-Version: 1.0
References: <20230929053915.1530607-1-claudiu.beznea@bp.renesas.com>
 <20230929053915.1530607-19-claudiu.beznea@bp.renesas.com> <CAMuHMdWQVtroKntVamANrWiheDYa6+=L8K53__1WUZg3bF8EFQ@mail.gmail.com>
In-Reply-To: <CAMuHMdWQVtroKntVamANrWiheDYa6+=L8K53__1WUZg3bF8EFQ@mail.gmail.com>
From:   Geert Uytterhoeven <geert@linux-m68k.org>
Date:   Thu, 5 Oct 2023 12:04:09 +0200
Message-ID: <CAMuHMdXsvs886VaKsVgG-h-0iBAhueunUBBcYW0L48GTHApUbA@mail.gmail.com>
Subject: Re: [PATCH v2 18/28] pinctrl: renesas: rzg2l: add support for
 different ds values on different groups
To:     Claudiu <claudiu.beznea@tuxon.dev>
Cc:     geert+renesas@glider.be, mturquette@baylibre.com, sboyd@kernel.org,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        conor+dt@kernel.org, linus.walleij@linaro.org,
        gregkh@linuxfoundation.org, jirislaby@kernel.org,
        magnus.damm@gmail.com, catalin.marinas@arm.com, will@kernel.org,
        quic_bjorande@quicinc.com, konrad.dybcio@linaro.org, arnd@arndb.de,
        neil.armstrong@linaro.org, prabhakar.mahadev-lad.rj@bp.renesas.com,
        biju.das.jz@bp.renesas.com, linux-renesas-soc@vger.kernel.org,
        linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
        linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 8BIT
Precedence: bulk

On Wed, Oct 4, 2023 at 3:17 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> On Fri, Sep 29, 2023 at 7:39 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> >
> > RZ/G3S supports different drive strength values for different power sources
> > and pin groups (A, B, C). On each group there could be up to 4 drive
> > strength values per power source. Available power sources are 1v8, 2v5,
> > 3v3. Drive strength values are fine tuned than what was previously
> > available on the driver thus the necessity of having micro-amp support.
> > As drive strength and power source values are linked together the
> > hardware setup for these was moved at the end of
> > rzg2l_pinctrl_pinconf_set() to ensure proper validation of the new
> > values.
> >
> > The drive strength values are expected to be initialized though SoC
> > specific hardware configuration data structure.
> >
> > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> > ---
> >
> > Changes in v2:
> > - s/strenght/strength, s/togheter/together in commit description
> > - got rid of RZG2L_INVALID_IOLH_VAL macro and consider zero as invalid
> >   value for entries in struct rzg2l_hwcfg::iolh_group[abc]_ua[] arrays
> > - removed spinlock in rzg2l_[sg]et_power_source()
> > - introduced caps_to_pwr_reg() and simplified the code in
> >   rzg2l_[sg]et_power_source()
> > - changed return type of rzg2l_iolh_ua_to_val() to int and return
> >   -EINVAL on failure cases
> > - s/rzg2l_ds_supported/rzg2l_ds_is_supported
> > - inverted the logic in rzg2l_pinctrl_pinconf_set() when applying drive
> >   strength and power source to hardware registers and thus simplified the
> >   code
> > - used devm_kcalloc() instead of devm_kzalloc()
> > - adderessed the rest of the review comments

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

> Thanks, will queue in renesas-pinctrl-for-v6.7, with Paul's comment
> addresses.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds