Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) client-ip=2620:137:e000::3:2;
Message-ID: <6dcb61f6-9be4-4feb-a7dd-44d606fcc480@quicinc.com>
Date:   Thu, 5 Oct 2023 19:18:45 +0530
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH] arm64: dts: qcom: ipq5018: add QUP1 SPI controller
Content-Language: en-US
To:     Robert Marko <robimarko@gmail.com>, <agross@kernel.org>,
        <andersson@kernel.org>, <konrad.dybcio@linaro.org>,
        <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <conor+dt@kernel.org>, <linux-arm-msm@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
References: <20231004191303.331055-1-robimarko@gmail.com>
From:   Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
In-Reply-To: <20231004191303.331055-1-robimarko@gmail.com>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 10/5/2023 12:42 AM, Robert Marko wrote:
> Add the required BAM and QUP nodes for the QUP1 SPI controller on IPQ5018.
>
> Signed-off-by: Robert Marko <robimarko@gmail.com>
> ---
>   arch/arm64/boot/dts/qcom/ipq5018.dtsi | 24 ++++++++++++++++++++++++
>   1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 38ffdc3cbdcd..484034e65f4f 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -146,6 +146,16 @@ sdhc_1: mmc@7804000 {
>   			status = "disabled";
>   		};
>   
> +		blsp_dma: dma-controller@7884000 {
> +			compatible = "qcom,bam-v1.7.0";
> +			reg = <0x07884000 0x1d000>;
> +			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
> +			clock-names = "bam_clk";
> +			#dma-cells = <1>;
> +			qcom,ee = <0>;
> +		};
> +
>   		blsp1_uart1: serial@78af000 {
>   			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>   			reg = <0x078af000 0x200>;
> @@ -156,6 +166,20 @@ blsp1_uart1: serial@78af000 {
>   			status = "disabled";
>   		};
>   
> +		blsp1_spi1: spi@78b5000 {
> +			compatible = "qcom,spi-qup-v2.2.1";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x78b5000 0x600>;


Please pad the address part to 8 hex digits with leading zeroes. With that,

Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com>


> +			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
> +				 <&gcc GCC_BLSP1_AHB_CLK>;
> +			clock-names = "core", "iface";
> +			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
> +			dma-names = "tx", "rx";
> +			status = "disabled";
> +		};
> +
>   		intc: interrupt-controller@b000000 {
>   			compatible = "qcom,msm-qgic2";
>   			reg = <0x0b000000 0x1000>,  /* GICD */