Received: by 2002:a05:7412:518d:b0:e2:908c:2ebd with SMTP id fn13csp413902rdb; Thu, 5 Oct 2023 09:23:50 -0700 (PDT) X-Google-Smtp-Source: AGHT+IGVgpeoCN/fpmIn7G+UbTkI3LvYsgZyvWhn0/nyUe6qoPcFrsTgtPJuy0ce87X3MMqS+ZnE X-Received: by 2002:a05:6a00:1a4e:b0:68a:69ba:6791 with SMTP id h14-20020a056a001a4e00b0068a69ba6791mr5649741pfv.8.1696523029589; Thu, 05 Oct 2023 09:23:49 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1696523029; cv=none; d=google.com; s=arc-20160816; b=AXufLZIa2GwrOCDFVMlaDLD6uC1F8tJL3Q0LTOHWGdRf+XB0KCH43AMx0P0rLmlYfL 1PLkMcOSOxaWpKO+MwUlSLQFiFKau0CytHFkkginA1LI+F/Kz9IruP7TTATRG6MATRMG dQP5uOy73Qx3t3+pRM8OZ30AvCzqjcTHGKhCfTyy8g2OgFXd4tlXF5D86kRcgh53pZXh lqmT6wAHUxYHANNKQ3GpjzTp9qN8QdoSK7flzzvfn09wKmnwVkBkdJyCBoUpD47J6CAM 9pFhd7uVMsQx5wh+aFH7wTtbIYhcD7vOyWCJOjpzxPzAlMt4x5U7lw89Yk8/Wq6IZpfb ja3g== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:in-reply-to:autocrypt :from:references:cc:to:content-language:subject:user-agent :mime-version:date:message-id:dkim-signature; bh=+j6t8P7x3sNH4LP0U+V+3wCRNBETm9NLxA+hRZ1Hi9w=; fh=TmZkpiKXHp0iFPRogaP8BaDotmk7wgkQib/MSflgnk8=; b=QH8iOhCd2qA/jfB/vmgfKCnRTyD7/Fh56Nzgnp7hUE5sQ5af0O1W61cvWAc1R4OfYr JDuOv663T2TnrIiS97/vC1fyj1o8pusDDuJdFTyWz9r7azEU8fhlXZQHjwUrB23/wLrZ JCrdqg0qEeXr/zg7TdzzUpxUCAx0L38H/jGKBZ2jWP/2icAdLbahxzlMRBKwLVHyNxQP vq/8oFHolwk6MFXfuDYBsdTIlLQxrwbMkCnuF48GNS286+wBuc54wd95bE5rx4yt7Vk4 AL1GsHPDnTIGk/6h/LTRGujwsgW+DNba+1Ix+UPAYQGSypEZlv8MJUTrqN5ziWo1QKkT bmKQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass (test mode) header.i=@ideasonboard.com header.s=mail header.b=KZOS4gWU; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.35 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from groat.vger.email (groat.vger.email. [23.128.96.35]) by mx.google.com with ESMTPS id w63-20020a638242000000b00565f65e16bfsi1669064pgd.762.2023.10.05.09.23.49 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 05 Oct 2023 09:23:49 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.35 as permitted sender) client-ip=23.128.96.35; Authentication-Results: mx.google.com; dkim=pass (test mode) header.i=@ideasonboard.com header.s=mail header.b=KZOS4gWU; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.35 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by groat.vger.email (Postfix) with ESMTP id E363583CF93B; Thu, 5 Oct 2023 09:23:17 -0700 (PDT) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.10 at groat.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S242705AbjJEQVq (ORCPT + 99 others); Thu, 5 Oct 2023 12:21:46 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36060 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241273AbjJEQQH (ORCPT ); Thu, 5 Oct 2023 12:16:07 -0400 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [213.167.242.64]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C5B6716841; Thu, 5 Oct 2023 08:11:23 -0700 (PDT) Received: from [192.168.0.43] (cpc141996-chfd3-2-0-cust928.12-3.cable.virginm.net [86.13.91.161]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 3975B8C2; Thu, 5 Oct 2023 17:09:33 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1696518574; bh=TzL/kOs9SvbBwvz6QprKV8P/MoH547rNUTYrt8O+Hxg=; h=Date:Subject:To:Cc:References:From:In-Reply-To:From; b=KZOS4gWUndnpLmqy0KG9/FOyAX8r5Ofa3QPIGQYYeVRuMXwoTQ2Tn2aWKzSUbgB1O OOmsI8qDhaVPRn1egPqAB4yhWX0YimM/mWrrFVXQBl+AVFvxUl6O7Sdc0ctC7JaLa9 p7R9VRjil5PP6vfVz8bgA4GlfzUFfK/tHyPJ8No0= Message-ID: <674282fe-00e3-40ad-84e4-108d0456f552@ideasonboard.com> Date: Thu, 5 Oct 2023 16:11:17 +0100 MIME-Version: 1.0 User-Agent: Mozilla Thunderbird Subject: Re: [PATCH v4 3/5] media: stm32-dcmipp: STM32 DCMIPP camera interface driver Content-Language: en-US To: Alain Volmat , Hugues Fruchet , Mauro Carvalho Chehab , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Maxime Coquelin , Alexandre Torgue , Russell King , Philipp Zabel Cc: Laurent Pinchart , Sakari Ailus , linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org References: <20230927123842.944025-1-alain.volmat@foss.st.com> <20230927123842.944025-4-alain.volmat@foss.st.com> From: Dan Scally Autocrypt: addr=dan.scally@ideasonboard.com; keydata= xsFNBGLydlEBEADa5O2s0AbUguprfvXOQun/0a8y2Vk6BqkQALgeD6KnXSWwaoCULp18etYW B31bfgrdphXQ5kUQibB0ADK8DERB4wrzrUb5CMxLBFE7mQty+v5NsP0OFNK9XTaAOcmD+Ove eIjYvqurAaro91jrRVrS1gBRxIFqyPgNvwwL+alMZhn3/2jU2uvBmuRrgnc/e9cHKiuT3Dtq MHGPKL2m+plk+7tjMoQFfexoQ1JKugHAjxAhJfrkXh6uS6rc01bYCyo7ybzg53m1HLFJdNGX sUKR+dQpBs3SY4s66tc1sREJqdYyTsSZf80HjIeJjU/hRunRo4NjRIJwhvnK1GyjOvvuCKVU RWpY8dNjNu5OeAfdrlvFJOxIE9M8JuYCQTMULqd1NuzbpFMjc9524U3Cngs589T7qUMPb1H1 NTA81LmtJ6Y+IV5/kiTUANflpzBwhu18Ok7kGyCq2a2jsOcVmk8gZNs04gyjuj8JziYwwLbf vzABwpFVcS8aR+nHIZV1HtOzyw8CsL8OySc3K9y+Y0NRpziMRvutrppzgyMb9V+N31mK9Mxl 1YkgaTl4ciNWpdfUe0yxH03OCuHi3922qhPLF4XX5LN+NaVw5Xz2o3eeWklXdouxwV7QlN33 u4+u2FWzKxDqO6WLQGjxPE0mVB4Gh5Pa1Vb0ct9Ctg0qElvtGQARAQABzShEYW4gU2NhbGx5 IDxkYW4uc2NhbGx5QGlkZWFzb25ib2FyZC5jb20+wsGNBBMBCAA3FiEEsdtt8OWP7+8SNfQe kiQuh/L+GMQFAmLydlIFCQWjmoACGwMECwkIBwUVCAkKCwUWAgMBAAAKCRCSJC6H8v4YxDI2 EAC2Gz0iyaXJkPInyshrREEWbo0CA6v5KKf3I/HlMPqkZ48bmGoYm4mEQGFWZJAT3K4ir8bg cEfs9V54gpbrZvdwS4abXbUK4WjKwEs8HK3XJv1WXUN2bsz5oEJWZUImh9gD3naiLLI9QMMm w/aZkT+NbN5/2KvChRWhdcha7+2Te4foOY66nIM+pw2FZM6zIkInLLUik2zXOhaZtqdeJZQi HSPU9xu7TRYN4cvdZAnSpG7gQqmLm5/uGZN1/sB3kHTustQtSXKMaIcD/DMNI3JN/t+RJVS7 c0Jh/ThzTmhHyhxx3DRnDIy7kwMI4CFvmhkVC2uNs9kWsj1DuX5kt8513mvfw2OcX9UnNKmZ nhNCuF6DxVrL8wjOPuIpiEj3V+K7DFF1Cxw1/yrLs8dYdYh8T8vCY2CHBMsqpESROnTazboh AiQ2xMN1cyXtX11Qwqm5U3sykpLbx2BcmUUUEAKNsM//Zn81QXKG8vOx0ZdMfnzsCaCzt8f6 9dcDBBI3tJ0BI9ByiocqUoL6759LM8qm18x3FYlxvuOs4wSGPfRVaA4yh0pgI+ModVC2Pu3y ejE/IxeatGqJHh6Y+iJzskdi27uFkRixl7YJZvPJAbEn7kzSi98u/5ReEA8Qhc8KO/B7wprj xjNMZNYd0Eth8+WkixHYj752NT5qshKJXcyUU87BTQRi8nZSARAAx0BJayh1Fhwbf4zoY56x xHEpT6DwdTAYAetd3yiKClLVJadYxOpuqyWa1bdfQWPb+h4MeXbWw/53PBgn7gI2EA7ebIRC PJJhAIkeym7hHZoxqDQTGDJjxFEL11qF+U3rhWiL2Zt0Pl+zFq0eWYYVNiXjsIS4FI2+4m16 tPbDWZFJnSZ828VGtRDQdhXfx3zyVX21lVx1bX4/OZvIET7sVUufkE4hrbqrrufre7wsjD1t 8MQKSapVrr1RltpzPpScdoxknOSBRwOvpp57pJJe5A0L7+WxJ+vQoQXj0j+5tmIWOAV1qBQp hyoyUk9JpPfntk2EKnZHWaApFp5TcL6c5LhUvV7F6XwOjGPuGlZQCWXee9dr7zym8iR3irWT +49bIh5PMlqSLXJDYbuyFQHFxoiNdVvvf7etvGfqFYVMPVjipqfEQ38ST2nkzx+KBICz7uwj JwLBdTXzGFKHQNckGMl7F5QdO/35An/QcxBnHVMXqaSd12tkJmoRVWduwuuoFfkTY5mUV3uX xGj3iVCK4V+ezOYA7c2YolfRCNMTza6vcK/P4tDjjsyBBZrCCzhBvd4VVsnnlZhVaIxoky4K aL+AP+zcQrUZmXmgZjXOLryGnsaeoVrIFyrU6ly90s1y3KLoPsDaTBMtnOdwxPmo1xisH8oL a/VRgpFBfojLPxMAEQEAAcLBfAQYAQgAJhYhBLHbbfDlj+/vEjX0HpIkLofy/hjEBQJi8nZT BQkFo5qAAhsMAAoJEJIkLofy/hjEXPcQAMIPNqiWiz/HKu9W4QIf1OMUpKn3YkVIj3p3gvfM Res4fGX94Ji599uLNrPoxKyaytC4R6BTxVriTJjWK8mbo9jZIRM4vkwkZZ2bu98EweSucxbp vjESsvMXGgxniqV/RQ/3T7LABYRoIUutARYq58p5HwSP0frF0fdFHYdTa2g7MYZl1ur2JzOC FHRpGadlNzKDE3fEdoMobxHB3Lm6FDml5GyBAA8+dQYVI0oDwJ3gpZPZ0J5Vx9RbqXe8RDuR du90hvCJkq7/tzSQ0GeD3BwXb9/R/A4dVXhaDd91Q1qQXidI+2jwhx8iqiYxbT+DoAUkQRQy xBtoCM1CxH7u45URUgD//fxYr3D4B1SlonA6vdaEdHZOGwECnDpTxecENMbz/Bx7qfrmd901 D+N9SjIwrbVhhSyUXYnSUb8F+9g2RDY42Sk7GcYxIeON4VzKqWM7hpkXZ47pkK0YodO+dRKM yMcoUWrTK0Uz6UzUGKoJVbxmSW/EJLEGoI5p3NWxWtScEVv8mO49gqQdrRIOheZycDmHnItt 9Qjv00uFhEwv2YfiyGk6iGF2W40s2pH2t6oeuGgmiZ7g6d0MEK8Ql/4zPItvr1c1rpwpXUC1 u1kQWgtnNjFHX3KiYdqjcZeRBiry1X0zY+4Y24wUU0KsEewJwjhmCKAsju1RpdlPg2kC In-Reply-To: <20230927123842.944025-4-alain.volmat@foss.st.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, score=1.1 required=5.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI, PDS_OTHER_BAD_TLD,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=no autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on groat.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (groat.vger.email [0.0.0.0]); Thu, 05 Oct 2023 09:23:18 -0700 (PDT) X-Spam-Level: * Hi Alain and Hugues - thanks for the update On 27/09/2023 13:38, Alain Volmat wrote: > From: Hugues Fruchet > > This V4L2 subdev driver enables Digital Camera Memory Interface > Pixel Processor(DCMIPP) of STMicroelectronics STM32 SoC series. > > Signed-off-by: Hugues Fruchet > Signed-off-by: Alain Volmat > --- > drivers/media/platform/st/stm32/Kconfig | 15 + > drivers/media/platform/st/stm32/Makefile | 1 + > .../platform/st/stm32/stm32-dcmipp/Makefile | 4 + > .../st/stm32/stm32-dcmipp/dcmipp-bytecap.c | 993 ++++++++++++++++++ > .../st/stm32/stm32-dcmipp/dcmipp-byteproc.c | 591 +++++++++++ > .../st/stm32/stm32-dcmipp/dcmipp-common.c | 106 ++ > .../st/stm32/stm32-dcmipp/dcmipp-common.h | 207 ++++ > .../st/stm32/stm32-dcmipp/dcmipp-core.c | 603 +++++++++++ > .../st/stm32/stm32-dcmipp/dcmipp-parallel.c | 461 ++++++++ > 9 files changed, 2981 insertions(+) > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/Makefile > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-bytecap.c > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-byteproc.c > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.c > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.h > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-core.c > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-parallel.c > > diff --git a/drivers/media/platform/st/stm32/Kconfig b/drivers/media/platform/st/stm32/Kconfig > index b22dd4753496..fab531866941 100644 > --- a/drivers/media/platform/st/stm32/Kconfig > +++ b/drivers/media/platform/st/stm32/Kconfig > @@ -16,6 +16,21 @@ config VIDEO_STM32_DCMI > To compile this driver as a module, choose M here: the module > will be called stm32-dcmi. > > +config VIDEO_STM32_DCMIPP > + tristate "STM32 Digital Camera Memory Interface Pixel Processor (DCMIPP) support" > + depends on V4L_PLATFORM_DRIVERS > + depends on VIDEO_DEV && OF > + depends on MEDIA_CONTROLLER > + depends on ARCH_STM32 || COMPILE_TEST > + select VIDEOBUF2_DMA_CONTIG > + select V4L2_FWNODE > + help > + This module makes the STM32 Digital Camera Memory Interface > + Pixel Processor (DCMIPP) available as a v4l2 device. > + > + To compile this driver as a module, choose M here: the module > + will be called stm32-dcmipp. > + > # Mem2mem drivers > config VIDEO_STM32_DMA2D > tristate "STM32 Chrom-Art Accelerator (DMA2D)" > diff --git a/drivers/media/platform/st/stm32/Makefile b/drivers/media/platform/st/stm32/Makefile > index 896ef98a73ab..7ed8297b9b19 100644 > --- a/drivers/media/platform/st/stm32/Makefile > +++ b/drivers/media/platform/st/stm32/Makefile > @@ -1,4 +1,5 @@ > # SPDX-License-Identifier: GPL-2.0-only > obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32-dcmi.o > +obj-$(CONFIG_VIDEO_STM32_DCMIPP) += stm32-dcmipp/ > stm32-dma2d-objs := dma2d/dma2d.o dma2d/dma2d-hw.o > obj-$(CONFIG_VIDEO_STM32_DMA2D) += stm32-dma2d.o > diff --git a/drivers/media/platform/st/stm32/stm32-dcmipp/Makefile b/drivers/media/platform/st/stm32/stm32-dcmipp/Makefile > new file mode 100644 > index 000000000000..8920d9388a21 > --- /dev/null > +++ b/drivers/media/platform/st/stm32/stm32-dcmipp/Makefile > @@ -0,0 +1,4 @@ > +# SPDX-License-Identifier: GPL-2.0 > +stm32-dcmipp-y := dcmipp-core.o dcmipp-common.o dcmipp-parallel.o dcmipp-byteproc.o dcmipp-bytecap.o > + > +obj-$(CONFIG_VIDEO_STM32_DCMIPP) += stm32-dcmipp.o > diff --git a/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-bytecap.c b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-bytecap.c > new file mode 100644 > index 000000000000..dfd41fe8546c > --- /dev/null > +++ b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-bytecap.c > @@ -0,0 +1,993 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Driver for STM32 Digital Camera Memory Interface Pixel Processor > + * > + * Copyright (C) STMicroelectronics SA 2022 > + * Authors: Hugues Fruchet > + * Alain Volmat > + * for STMicroelectronics. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "dcmipp-common.h" > + > +#define DCMIPP_PRSR 0x1f8 > +#define DCMIPP_CMIER 0x3f0 > +#define DCMIPP_CMIER_P0FRAMEIE BIT(9) > +#define DCMIPP_CMIER_P0VSYNCIE BIT(10) > +#define DCMIPP_CMIER_P0OVRIE BIT(15) > +#define DCMIPP_CMIER_P0ALL (DCMIPP_CMIER_P0VSYNCIE |\ > + DCMIPP_CMIER_P0FRAMEIE |\ > + DCMIPP_CMIER_P0OVRIE) > +#define DCMIPP_CMSR1 0x3f4 > +#define DCMIPP_CMSR2 0x3f8 > +#define DCMIPP_CMSR2_P0FRAMEF BIT(9) > +#define DCMIPP_CMSR2_P0VSYNCF BIT(10) > +#define DCMIPP_CMSR2_P0OVRF BIT(15) > +#define DCMIPP_CMFCR 0x3fc > +#define DCMIPP_P0FSCR 0x404 > +#define DCMIPP_P0FSCR_PIPEN BIT(31) > +#define DCMIPP_P0FCTCR 0x500 > +#define DCMIPP_P0FCTCR_CPTREQ BIT(3) > +#define DCMIPP_P0DCCNTR 0x5b0 > +#define DCMIPP_P0DCLMTR 0x5b4 > +#define DCMIPP_P0DCLMTR_ENABLE BIT(31) > +#define DCMIPP_P0DCLMTR_LIMIT_MASK GENMASK(23, 0) > +#define DCMIPP_P0PPM0AR1 0x5c4 > +#define DCMIPP_P0SR 0x5f8 > +#define DCMIPP_P0SR_CPTACT BIT(23) > + > +struct dcmipp_bytecap_pix_map { > + unsigned int code; > + u32 pixelformat; > +}; > + > +#define PIXMAP_MBUS_PFMT(mbus, fmt) \ > + { \ > + .code = MEDIA_BUS_FMT_##mbus, \ > + .pixelformat = V4L2_PIX_FMT_##fmt \ > + } > + > +static const struct dcmipp_bytecap_pix_map dcmipp_bytecap_pix_map_list[] = { > + PIXMAP_MBUS_PFMT(RGB565_2X8_LE, RGB565), > + PIXMAP_MBUS_PFMT(YUYV8_2X8, YUYV), > + PIXMAP_MBUS_PFMT(YVYU8_2X8, YVYU), > + PIXMAP_MBUS_PFMT(UYVY8_2X8, UYVY), > + PIXMAP_MBUS_PFMT(VYUY8_2X8, VYUY), > + PIXMAP_MBUS_PFMT(Y8_1X8, GREY), > + PIXMAP_MBUS_PFMT(SBGGR8_1X8, SBGGR8), > + PIXMAP_MBUS_PFMT(SGBRG8_1X8, SGBRG8), > + PIXMAP_MBUS_PFMT(SGRBG8_1X8, SGRBG8), > + PIXMAP_MBUS_PFMT(SRGGB8_1X8, SRGGB8), > + PIXMAP_MBUS_PFMT(JPEG_1X8, JPEG), > +}; > + > +static const struct dcmipp_bytecap_pix_map * > +dcmipp_bytecap_pix_map_by_pixelformat(u32 pixelformat) > +{ > + unsigned int i; > + > + for (i = 0; i < ARRAY_SIZE(dcmipp_bytecap_pix_map_list); i++) { > + if (dcmipp_bytecap_pix_map_list[i].pixelformat == pixelformat) > + return &dcmipp_bytecap_pix_map_list[i]; > + } > + > + return NULL; > +} > + > +struct dcmipp_buf { > + struct vb2_v4l2_buffer vb; > + bool prepared; > + dma_addr_t addr; > + size_t size; > + struct list_head list; > +}; > + > +enum dcmipp_state { > + DCMIPP_STOPPED = 0, > + DCMIPP_WAIT_FOR_BUFFER, > + DCMIPP_RUNNING, > +}; > + > +struct dcmipp_bytecap_device { > + struct dcmipp_ent_device ved; > + struct video_device vdev; > + struct device *dev; > + struct v4l2_pix_format format; > + struct vb2_queue queue; > + struct list_head buffers; > + /* > + * Protects concurrent calls of buf queue / irq handler > + * and buffer handling related variables / lists > + */ > + spinlock_t irqlock; > + /* mutex used as vdev and queue lock */ > + struct mutex lock; > + u32 sequence; > + struct media_pipeline pipe; > + struct v4l2_subdev *s_subdev; > + > + enum dcmipp_state state; > + > + /* > + * DCMIPP driver is handling 2 buffers > + * active: buffer into which DCMIPP is currently writing into > + * next: buffer given to the DCMIPP and which will become > + * automatically active on next VSYNC > + */ > + struct dcmipp_buf *active, *next; > + > + void __iomem *regs; > + > + u32 cmier; > + u32 cmsr2; > + > + struct { > + u32 errors; > + u32 limit; > + u32 overrun; > + u32 buffers; > + u32 vsync; > + u32 frame; > + u32 it; > + u32 underrun; > + u32 nactive; > + } count; > +}; > + > +static const struct v4l2_pix_format fmt_default = { > + .width = DCMIPP_FMT_WIDTH_DEFAULT, > + .height = DCMIPP_FMT_HEIGHT_DEFAULT, > + .pixelformat = V4L2_PIX_FMT_RGB565, > + .field = V4L2_FIELD_NONE, > + .colorspace = DCMIPP_COLORSPACE_DEFAULT, > + .ycbcr_enc = DCMIPP_YCBCR_ENC_DEFAULT, > + .quantization = DCMIPP_QUANTIZATION_DEFAULT, > + .xfer_func = DCMIPP_XFER_FUNC_DEFAULT, > +}; > + > +static inline int dcmipp_frame_size(u32 width, u32 height, u32 format) > +{ > + switch (format) { > + case V4L2_PIX_FMT_SBGGR8: > + case V4L2_PIX_FMT_SGBRG8: > + case V4L2_PIX_FMT_SGRBG8: > + case V4L2_PIX_FMT_SRGGB8: > + case V4L2_PIX_FMT_GREY: > + return width * height; > + case V4L2_PIX_FMT_RGB565: > + case V4L2_PIX_FMT_YUYV: > + case V4L2_PIX_FMT_YVYU: > + case V4L2_PIX_FMT_UYVY: > + case V4L2_PIX_FMT_VYUY: > + return width * height * 2; > + case V4L2_PIX_FMT_JPEG: > + return width * height; > + default: > + return 0; > + } > +} > + > +static inline int dcmipp_frame_stride(u32 width, u32 format) > +{ > + switch (format) { > + case V4L2_PIX_FMT_SBGGR8: > + case V4L2_PIX_FMT_SGBRG8: > + case V4L2_PIX_FMT_SGRBG8: > + case V4L2_PIX_FMT_SRGGB8: > + case V4L2_PIX_FMT_GREY: > + case V4L2_PIX_FMT_JPEG: > + return width; > + case V4L2_PIX_FMT_RGB565: > + case V4L2_PIX_FMT_YUYV: > + case V4L2_PIX_FMT_YVYU: > + case V4L2_PIX_FMT_UYVY: > + case V4L2_PIX_FMT_VYUY: > + return width * 2; > + default: > + return 0; > + } > +} I'd be inclined to use v4l2_format_info()'s .bpp array for this rather than rolling your own but it's not a big deal either way. > + > +static inline int dcmipp_hdw_pixel_alignment(u32 format) > +{ > + /* 16 bytes alignment required by hardware */ > + switch (format) { > + case V4L2_PIX_FMT_SBGGR8: > + case V4L2_PIX_FMT_SGBRG8: > + case V4L2_PIX_FMT_SGRBG8: > + case V4L2_PIX_FMT_SRGGB8: > + case V4L2_PIX_FMT_GREY: > + case V4L2_PIX_FMT_JPEG: > + return 4; /* 2^4 = 16 pixels = 16 bytes */ > + case V4L2_PIX_FMT_RGB565: > + case V4L2_PIX_FMT_YUYV: > + case V4L2_PIX_FMT_YVYU: > + case V4L2_PIX_FMT_UYVY: > + case V4L2_PIX_FMT_VYUY: > + return 3; /* 2^3 = 8 pixels = 16 bytes */ > + default: > + return 0; > + } > +} > + > +static int dcmipp_bytecap_querycap(struct file *file, void *priv, > + struct v4l2_capability *cap) > +{ > + strscpy(cap->driver, DCMIPP_PDEV_NAME, sizeof(cap->driver)); > + strscpy(cap->card, KBUILD_MODNAME, sizeof(cap->card)); > + > + return 0; > +} > + > +static int dcmipp_bytecap_g_fmt_vid_cap(struct file *file, void *priv, > + struct v4l2_format *f) > +{ > + struct dcmipp_bytecap_device *vcap = video_drvdata(file); > + > + f->fmt.pix = vcap->format; > + > + return 0; > +} > + > +static int dcmipp_bytecap_try_fmt_vid_cap(struct file *file, void *priv, > + struct v4l2_format *f) > +{ > + struct dcmipp_bytecap_device *vcap = video_drvdata(file); > + struct v4l2_pix_format *format = &f->fmt.pix; > + const struct dcmipp_bytecap_pix_map *vpix; > + u32 in_w, in_h; > + > + /* Don't accept a pixelformat that is not on the table */ > + vpix = dcmipp_bytecap_pix_map_by_pixelformat(format->pixelformat); > + if (!vpix) > + format->pixelformat = fmt_default.pixelformat; > + > + /* Adjust width & height */ > + in_w = format->width; > + in_h = format->height; > + v4l_bound_align_image(&format->width, > + DCMIPP_FRAME_MIN_WIDTH, DCMIPP_FRAME_MAX_WIDTH, > + dcmipp_hdw_pixel_alignment(format->pixelformat), > + &format->height, > + DCMIPP_FRAME_MIN_HEIGHT, DCMIPP_FRAME_MAX_HEIGHT, > + dcmipp_hdw_pixel_alignment(format->pixelformat), > + 0); > + if (format->width != in_w || format->height != in_h) > + dev_dbg(vcap->dev, "resolution updated: %dx%d -> %dx%d\n", > + in_w, in_h, format->width, format->height); > + > + format->bytesperline = dcmipp_frame_stride(format->width, > + format->pixelformat); > + format->sizeimage = dcmipp_frame_size(format->width, format->height, > + format->pixelformat); > + > + if (format->field == V4L2_FIELD_ANY) > + format->field = fmt_default.field; > + > + dcmipp_colorimetry_clamp(format); > + > + return 0; > +} > + > +static int dcmipp_bytecap_s_fmt_vid_cap(struct file *file, void *priv, > + struct v4l2_format *f) > +{ > + struct dcmipp_bytecap_device *vcap = video_drvdata(file); > + int ret; > + > + /* Do not change the format while stream is on */ > + if (vb2_is_busy(&vcap->queue)) > + return -EBUSY; > + > + ret = dcmipp_bytecap_try_fmt_vid_cap(file, priv, f); > + if (ret) > + return ret; > + > + dev_dbg(vcap->dev, "%s: format update: old:%ux%u (0x%p4cc, %u, %u, %u, %u) new:%ux%d (0x%p4cc, %u, %u, %u, %u)\n", > + vcap->vdev.name, > + /* old */ > + vcap->format.width, vcap->format.height, > + &vcap->format.pixelformat, vcap->format.colorspace, > + vcap->format.quantization, vcap->format.xfer_func, > + vcap->format.ycbcr_enc, > + /* new */ > + f->fmt.pix.width, f->fmt.pix.height, > + &f->fmt.pix.pixelformat, f->fmt.pix.colorspace, > + f->fmt.pix.quantization, f->fmt.pix.xfer_func, > + f->fmt.pix.ycbcr_enc); > + > + vcap->format = f->fmt.pix; > + > + return 0; > +} > + > +static int dcmipp_bytecap_enum_fmt_vid_cap(struct file *file, void *priv, > + struct v4l2_fmtdesc *f) > +{ > + const struct dcmipp_bytecap_pix_map *vpix; > + unsigned int index = f->index; > + unsigned int i; > + > + if (f->mbus_code) { > + /* > + * If a media bus code is specified, only enumerate formats > + * compatible with it. > + */ > + for (i = 0; i < ARRAY_SIZE(dcmipp_bytecap_pix_map_list); i++) { > + vpix = &dcmipp_bytecap_pix_map_list[i]; > + if (vpix->code != f->mbus_code) > + continue; > + > + if (index == 0) > + break; > + > + index--; > + } > + > + if (i == ARRAY_SIZE(dcmipp_bytecap_pix_map_list)) > + return -EINVAL; > + } else { > + /* Otherwise, enumerate all formatS. */ stray capital S at the end there > + if (f->index >= ARRAY_SIZE(dcmipp_bytecap_pix_map_list)) > + return -EINVAL; > + > + vpix = &dcmipp_bytecap_pix_map_list[f->index]; > + } > + > + f->pixelformat = vpix->pixelformat; > + > + return 0; > +} > + > +static int dcmipp_bytecap_enum_framesizes(struct file *file, void *fh, > + struct v4l2_frmsizeenum *fsize) > +{ > + const struct dcmipp_bytecap_pix_map *vpix; > + > + if (fsize->index) > + return -EINVAL; > + > + /* Only accept code in the pix map table */ > + vpix = dcmipp_bytecap_pix_map_by_pixelformat(fsize->pixel_format); > + if (!vpix) > + return -EINVAL; > + > + fsize->type = V4L2_FRMSIZE_TYPE_CONTINUOUS; > + fsize->stepwise.min_width = DCMIPP_FRAME_MIN_WIDTH; > + fsize->stepwise.max_width = DCMIPP_FRAME_MAX_WIDTH; > + fsize->stepwise.min_height = DCMIPP_FRAME_MIN_HEIGHT; > + fsize->stepwise.max_height = DCMIPP_FRAME_MAX_HEIGHT; > + fsize->stepwise.step_width = 1; > + fsize->stepwise.step_height = 1; > + > + return 0; > +} > + > +static const struct v4l2_file_operations dcmipp_bytecap_fops = { > + .owner = THIS_MODULE, > + .open = v4l2_fh_open, > + .release = vb2_fop_release, > + .read = vb2_fop_read, > + .poll = vb2_fop_poll, > + .unlocked_ioctl = video_ioctl2, > + .mmap = vb2_fop_mmap, > +}; > + > +static const struct v4l2_ioctl_ops dcmipp_bytecap_ioctl_ops = { > + .vidioc_querycap = dcmipp_bytecap_querycap, > + > + .vidioc_g_fmt_vid_cap = dcmipp_bytecap_g_fmt_vid_cap, > + .vidioc_s_fmt_vid_cap = dcmipp_bytecap_s_fmt_vid_cap, > + .vidioc_try_fmt_vid_cap = dcmipp_bytecap_try_fmt_vid_cap, > + .vidioc_enum_fmt_vid_cap = dcmipp_bytecap_enum_fmt_vid_cap, > + .vidioc_enum_framesizes = dcmipp_bytecap_enum_framesizes, > + > + .vidioc_reqbufs = vb2_ioctl_reqbufs, > + .vidioc_create_bufs = vb2_ioctl_create_bufs, > + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, > + .vidioc_querybuf = vb2_ioctl_querybuf, > + .vidioc_qbuf = vb2_ioctl_qbuf, > + .vidioc_dqbuf = vb2_ioctl_dqbuf, > + .vidioc_expbuf = vb2_ioctl_expbuf, > + .vidioc_streamon = vb2_ioctl_streamon, > + .vidioc_streamoff = vb2_ioctl_streamoff, > +}; > + > +static int dcmipp_pipeline_s_stream(struct dcmipp_bytecap_device *vcap, > + int state) > +{ > + struct media_pad *pad; > + int ret; > + > + /* > + * Get source subdev - since link is IMMUTABLE, pointer is cached > + * within the dcmipp_bytecap_device structure > + */ > + if (!vcap->s_subdev) { > + pad = media_pad_remote_pad_first(&vcap->vdev.entity.pads[0]); > + if (!pad || !is_media_entity_v4l2_subdev(pad->entity)) > + return -EINVAL; > + vcap->s_subdev = media_entity_to_v4l2_subdev(pad->entity); > + } > + > + ret = v4l2_subdev_call(vcap->s_subdev, video, s_stream, state); > + if (ret < 0) { > + dev_err(vcap->dev, "failed to %s streaming (%d)\n", > + state ? "start" : "stop", ret); > + return ret; > + } > + > + return 0; > +} > + > +static void dcmipp_start_capture(struct dcmipp_bytecap_device *vcap, > + struct dcmipp_buf *buf) > +{ > + /* Set buffer address */ > + reg_write(vcap, DCMIPP_P0PPM0AR1, buf->addr); > + > + /* Set buffer size */ > + reg_write(vcap, DCMIPP_P0DCLMTR, DCMIPP_P0DCLMTR_ENABLE | > + ((buf->size / 4) & DCMIPP_P0DCLMTR_LIMIT_MASK)); > + > + /* Capture request */ > + reg_set(vcap, DCMIPP_P0FCTCR, DCMIPP_P0FCTCR_CPTREQ); > +} > + > +static void dcmipp_bytecap_all_buffers_done(struct dcmipp_bytecap_device *vcap, > + enum vb2_buffer_state state) > +{ > + struct dcmipp_buf *buf, *node; > + > + list_for_each_entry_safe(buf, node, &vcap->buffers, list) { > + list_del_init(&buf->list); > + vb2_buffer_done(&buf->vb.vb2_buf, state); > + } > +} > + > +static int dcmipp_bytecap_start_streaming(struct vb2_queue *vq, > + unsigned int count) > +{ > + struct dcmipp_bytecap_device *vcap = vb2_get_drv_priv(vq); > + struct media_entity *entity = &vcap->vdev.entity; > + struct dcmipp_buf *buf; > + int ret; > + > + vcap->sequence = 0; > + memset(&vcap->count, 0, sizeof(vcap->count)); > + > + ret = pm_runtime_resume_and_get(vcap->dev); > + if (ret < 0) { > + dev_err(vcap->dev, "%s: Failed to start streaming, cannot get sync (%d)\n", > + __func__, ret); > + goto err_buffer_done; > + } > + > + /* Start the media pipeline */ > + ret = media_pipeline_start(entity->pads, &vcap->pipe); > + if (ret) { > + dev_dbg(vcap->dev, "%s: Failed to start streaming, media pipeline start error (%d)\n", > + __func__, ret); > + goto err_pm_put; > + } > + > + /* Start all the elements within pipeline */ > + ret = dcmipp_pipeline_s_stream(vcap, 1); > + if (ret) > + goto err_media_pipeline_stop; > + > + spin_lock_irq(&vcap->irqlock); > + > + /* Enable pipe at the end of programming */ > + reg_set(vcap, DCMIPP_P0FSCR, DCMIPP_P0FSCR_PIPEN); > + > + /* > + * Start capture if at least one buffer has been queued, > + * otherwise start is deferred until the next buffer is queued > + */ > + buf = list_first_entry_or_null(&vcap->buffers, typeof(*buf), list); > + if (!buf) { > + dev_dbg(vcap->dev, "Start streaming is deferred to next buffer queueing\n"); > + vcap->next = NULL; > + vcap->state = DCMIPP_WAIT_FOR_BUFFER; > + spin_unlock_irq(&vcap->irqlock); > + return 0; > + } The vb2 core ought to handle this for you; if you've set min_buffers_needed then vb2_start_streaming() shouldn't be called until the required number of buffers have been queued. > + vcap->next = buf; > + dev_dbg(vcap->dev, "Start with next [%d] %p phy=%pad\n", > + buf->vb.vb2_buf.index, buf, &buf->addr); > + > + /* Start capture */ > + dcmipp_start_capture(vcap, buf); This comment and a couple of the other ones above are a bit superfluous. > + > + /* Enable interruptions */ > + vcap->cmier |= DCMIPP_CMIER_P0ALL; > + reg_set(vcap, DCMIPP_CMIER, vcap->cmier); > + > + vcap->state = DCMIPP_RUNNING; > + > + spin_unlock_irq(&vcap->irqlock); > + > + return 0; > + > +err_media_pipeline_stop: > + media_pipeline_stop(entity->pads); > +err_pm_put: > + pm_runtime_put(vcap->dev); > +err_buffer_done: > + spin_lock_irq(&vcap->irqlock); > + /* > + * Return all buffers to vb2 in QUEUED state. > + * This will give ownership back to userspace > + */ > + dcmipp_bytecap_all_buffers_done(vcap, VB2_BUF_STATE_QUEUED); > + vcap->active = NULL; > + spin_unlock_irq(&vcap->irqlock); > + > + return ret; > +} > + > +static void dcmipp_dump_status(struct dcmipp_bytecap_device *vcap) > +{ > + struct device *dev = vcap->dev; > + > + dev_dbg(dev, "[DCMIPP_PRSR] =%#10.8x\n", reg_read(vcap, DCMIPP_PRSR)); > + dev_dbg(dev, "[DCMIPP_P0SR] =%#10.8x\n", reg_read(vcap, DCMIPP_P0SR)); > + dev_dbg(dev, "[DCMIPP_P0DCCNTR]=%#10.8x\n", > + reg_read(vcap, DCMIPP_P0DCCNTR)); > + dev_dbg(dev, "[DCMIPP_CMSR1] =%#10.8x\n", reg_read(vcap, DCMIPP_CMSR1)); > + dev_dbg(dev, "[DCMIPP_CMSR2] =%#10.8x\n", reg_read(vcap, DCMIPP_CMSR2)); > +} > + > +/* > + * Stop the stream engine. Any remaining buffers in the stream queue are > + * dequeued and passed on to the vb2 framework marked as STATE_ERROR. > + */ > +static void dcmipp_bytecap_stop_streaming(struct vb2_queue *vq) > +{ > + struct dcmipp_bytecap_device *vcap = vb2_get_drv_priv(vq); > + int ret; > + u32 status; > + > + dcmipp_pipeline_s_stream(vcap, 0); > + > + /* Stop the media pipeline */ > + media_pipeline_stop(vcap->vdev.entity.pads); > + > + /* Disable interruptions */ > + reg_clear(vcap, DCMIPP_CMIER, vcap->cmier); > + > + /* Stop capture */ > + reg_clear(vcap, DCMIPP_P0FCTCR, DCMIPP_P0FCTCR_CPTREQ); > + > + /* Wait until CPTACT become 0 */ > + ret = readl_relaxed_poll_timeout(vcap->regs + DCMIPP_P0SR, status, > + !(status & DCMIPP_P0SR_CPTACT), > + 20 * USEC_PER_MSEC, > + 1000 * USEC_PER_MSEC); > + if (ret) > + dev_warn(vcap->dev, "Timeout when stopping\n"); > + > + /* Disable pipe */ > + reg_clear(vcap, DCMIPP_P0FSCR, DCMIPP_P0FSCR_PIPEN); > + > + spin_lock_irq(&vcap->irqlock); > + > + /* Return all queued buffers to vb2 in ERROR state */ > + dcmipp_bytecap_all_buffers_done(vcap, VB2_BUF_STATE_ERROR); > + INIT_LIST_HEAD(&vcap->buffers); > + > + vcap->active = NULL; Does vcap->active not need a vb2_buffer_done() call too? > + vcap->state = DCMIPP_STOPPED; > + > + spin_unlock_irq(&vcap->irqlock); > + > + dcmipp_dump_status(vcap); > + > + pm_runtime_put(vcap->dev); > + > + if (vcap->count.errors) > + dev_warn(vcap->dev, "Some errors found while streaming: errors=%d (overrun=%d, limit=%d, nactive=%d), underrun=%d, buffers=%d\n", > + vcap->count.errors, vcap->count.overrun, > + vcap->count.limit, vcap->count.nactive, > + vcap->count.underrun, vcap->count.buffers); > +} > + > +static int dcmipp_bytecap_buf_prepare(struct vb2_buffer *vb) > +{ > + struct dcmipp_bytecap_device *vcap = vb2_get_drv_priv(vb->vb2_queue); > + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); > + struct dcmipp_buf *buf = container_of(vbuf, struct dcmipp_buf, vb); > + unsigned long size; > + > + size = vcap->format.sizeimage; > + > + if (vb2_plane_size(vb, 0) < size) { > + dev_err(vcap->dev, "%s data will not fit into plane (%lu < %lu)\n", > + __func__, vb2_plane_size(vb, 0), size); > + return -EINVAL; > + } > + > + vb2_set_plane_payload(vb, 0, size); > + > + if (!buf->prepared) { > + /* Get memory addresses */ > + buf->addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); > + buf->size = vb2_plane_size(&buf->vb.vb2_buf, 0); > + buf->prepared = true; > + > + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, buf->size); > + > + dev_dbg(vcap->dev, "Setup [%d] phy=%pad size=%zu\n", > + vb->index, &buf->addr, buf->size); > + } > + > + return 0; > +} > + > +static void dcmipp_bytecap_buf_queue(struct vb2_buffer *vb2_buf) > +{ > + struct dcmipp_bytecap_device *vcap = > + vb2_get_drv_priv(vb2_buf->vb2_queue); > + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb2_buf); > + struct dcmipp_buf *buf = container_of(vbuf, struct dcmipp_buf, vb); > + > + dev_dbg(vcap->dev, "Queue [%d] %p phy=%pad\n", buf->vb.vb2_buf.index, > + buf, &buf->addr); > + > + spin_lock_irq(&vcap->irqlock); > + list_add_tail(&buf->list, &vcap->buffers); > + > + if (vcap->state == DCMIPP_WAIT_FOR_BUFFER) { > + vcap->next = buf; > + dev_dbg(vcap->dev, "Restart with next [%d] %p phy=%pad\n", > + buf->vb.vb2_buf.index, buf, &buf->addr); > + > + dcmipp_start_capture(vcap, buf); > + > + vcap->state = DCMIPP_RUNNING; > + } Again the vb2 core ought to handle this wait for you. > + > + spin_unlock_irq(&vcap->irqlock); > +} > + > +static int dcmipp_bytecap_queue_setup(struct vb2_queue *vq, > + unsigned int *nbuffers, > + unsigned int *nplanes, > + unsigned int sizes[], > + struct device *alloc_devs[]) > +{ > + struct dcmipp_bytecap_device *vcap = vb2_get_drv_priv(vq); > + unsigned int size; > + > + size = vcap->format.sizeimage; > + > + /* Make sure the image size is large enough */ > + if (*nplanes) > + return sizes[0] < vcap->format.sizeimage ? -EINVAL : 0; > + > + *nplanes = 1; > + sizes[0] = vcap->format.sizeimage; > + > + dev_dbg(vcap->dev, "Setup queue, count=%d, size=%d\n", > + *nbuffers, size); > + > + return 0; > +} > + > +static int dcmipp_bytecap_buf_init(struct vb2_buffer *vb) > +{ > + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); > + struct dcmipp_buf *buf = container_of(vbuf, struct dcmipp_buf, vb); > + > + INIT_LIST_HEAD(&buf->list); > + > + return 0; > +} > + > +static const struct vb2_ops dcmipp_bytecap_qops = { > + .start_streaming = dcmipp_bytecap_start_streaming, > + .stop_streaming = dcmipp_bytecap_stop_streaming, > + .buf_init = dcmipp_bytecap_buf_init, > + .buf_prepare = dcmipp_bytecap_buf_prepare, > + .buf_queue = dcmipp_bytecap_buf_queue, > + .queue_setup = dcmipp_bytecap_queue_setup, > + /* > + * Since q->lock is set we can use the standard > + * vb2_ops_wait_prepare/finish helper functions. > + */ > + .wait_prepare = vb2_ops_wait_prepare, > + .wait_finish = vb2_ops_wait_finish, > +}; > + > +static void dcmipp_bytecap_release(struct video_device *vdev) > +{ > + struct dcmipp_bytecap_device *vcap = > + container_of(vdev, struct dcmipp_bytecap_device, vdev); > + > + dcmipp_pads_cleanup(vcap->ved.pads); > + mutex_destroy(&vcap->lock); > + > + kfree(vcap); > +} > + > +void dcmipp_bytecap_ent_release(struct dcmipp_ent_device *ved) > +{ > + struct dcmipp_bytecap_device *vcap = > + container_of(ved, struct dcmipp_bytecap_device, ved); > + > + media_entity_cleanup(ved->ent); > + vb2_video_unregister_device(&vcap->vdev); > +} > + > +static void dcmipp_buffer_done(struct dcmipp_bytecap_device *vcap, > + struct dcmipp_buf *buf, > + size_t bytesused, > + int err) > +{ > + struct vb2_v4l2_buffer *vbuf; > + > + list_del_init(&buf->list); > + > + vbuf = &buf->vb; > + > + vbuf->sequence = vcap->sequence++; > + vbuf->field = V4L2_FIELD_NONE; > + vbuf->vb2_buf.timestamp = ktime_get_ns(); > + vb2_set_plane_payload(&vbuf->vb2_buf, 0, bytesused); > + vb2_buffer_done(&vbuf->vb2_buf, > + err ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE); > + dev_dbg(vcap->dev, "Done [%d] %p phy=%pad\n", buf->vb.vb2_buf.index, > + buf, &buf->addr); > + vcap->count.buffers++; > +} > + > +/* irqlock must be held */ > +static void > +dcmipp_bytecap_set_next_frame_or_stop(struct dcmipp_bytecap_device *vcap) > +{ > + if (!vcap->next && list_is_singular(&vcap->buffers)) { > + /* > + * If there is no available buffer (none or a single one in the > + * list while two are expected), stop the capture (effective > + * for next frame). On-going frame capture will continue until > + * FRAME END but no further capture will be done. > + */ > + reg_clear(vcap, DCMIPP_P0FCTCR, DCMIPP_P0FCTCR_CPTREQ); > + > + dev_dbg(vcap->dev, "Capture restart is deferred to next buffer queueing\n"); > + vcap->next = NULL; > + vcap->state = DCMIPP_WAIT_FOR_BUFFER; > + return; > + } > + > + /* If we don't have buffer yet, pick the one after active */ > + if (!vcap->next) > + vcap->next = list_next_entry(vcap->active, list); > + > + /* > + * Set buffer address > + * This register is shadowed and will be taken into > + * account on next VSYNC (start of next frame) > + */ > + reg_write(vcap, DCMIPP_P0PPM0AR1, vcap->next->addr); > + dev_dbg(vcap->dev, "Write [%d] %p phy=%pad\n", > + vcap->next->vb.vb2_buf.index, vcap->next, &vcap->next->addr); > +} > + > +/* irqlock must be held */ > +static void dcmipp_bytecap_process_frame(struct dcmipp_bytecap_device *vcap, > + size_t bytesused) > +{ > + int err = 0; > + struct dcmipp_buf *buf = vcap->active; > + > + if (!buf) { > + vcap->count.nactive++; > + vcap->count.errors++; > + return; > + } > + > + if (bytesused > buf->size) { > + dev_dbg(vcap->dev, "frame larger than expected (%zu > %zu)\n", > + bytesused, buf->size); > + /* Clip to buffer size and return buffer to V4L2 in error */ > + bytesused = buf->size; > + vcap->count.limit++; > + vcap->count.errors++; > + err = -EOVERFLOW; > + } > + > + dcmipp_buffer_done(vcap, buf, bytesused, err); > + vcap->active = NULL; > +} > + > +static irqreturn_t dcmipp_bytecap_irq_thread(int irq, void *arg) > +{ > + struct dcmipp_bytecap_device *vcap = > + container_of(arg, struct dcmipp_bytecap_device, ved); > + size_t bytesused = 0; > + u32 cmsr2; > + > + spin_lock_irq(&vcap->irqlock); > + > + cmsr2 = vcap->cmsr2 & vcap->cmier; > + > + /* > + * If we have an overrun, a frame-end will probably not be generated, > + * in that case the active buffer will be recycled as next buffer by > + * the VSYNC handler > + */ > + if (cmsr2 & DCMIPP_CMSR2_P0OVRF) { > + vcap->count.errors++; > + vcap->count.overrun++; > + } > + > + if (cmsr2 & DCMIPP_CMSR2_P0FRAMEF) { > + vcap->count.frame++; > + > + /* Read captured buffer size */ > + bytesused = reg_read(vcap, DCMIPP_P0DCCNTR); > + dcmipp_bytecap_process_frame(vcap, bytesused); > + } > + > + if (cmsr2 & DCMIPP_CMSR2_P0VSYNCF) { > + vcap->count.vsync++; > + if (vcap->state == DCMIPP_WAIT_FOR_BUFFER) { > + vcap->count.underrun++; > + goto out; > + } > + > + /* > + * On VSYNC, the previously set next buffer is going to become > + * active thanks to the shadowing mechanism of the DCMIPP. In > + * most of the cases, since a FRAMEEND has already come, > + * pointer next is NULL since active is reset during the > + * FRAMEEND handling. However, in case of framerate adjustment, > + * there are more VSYNC than FRAMEEND. Thus we recycle the > + * active (but not used) buffer and put it back into next. > + */ > + swap(vcap->active, vcap->next); > + dcmipp_bytecap_set_next_frame_or_stop(vcap); > + } > + > +out: > + spin_unlock_irq(&vcap->irqlock); > + return IRQ_HANDLED; > +} > + > +static irqreturn_t dcmipp_bytecap_irq_callback(int irq, void *arg) > +{ > + struct dcmipp_bytecap_device *vcap = > + container_of(arg, struct dcmipp_bytecap_device, ved); > + > + /* Store interrupt status register */ > + vcap->cmsr2 = reg_read(vcap, DCMIPP_CMSR2) & vcap->cmier; > + vcap->count.it++; > + > + /* Clear interrupt */ > + reg_write(vcap, DCMIPP_CMFCR, vcap->cmsr2); > + > + return IRQ_WAKE_THREAD; > +} > + > +struct dcmipp_ent_device *dcmipp_bytecap_ent_init(struct device *dev, > + const char *entity_name, > + struct v4l2_device *v4l2_dev, > + void __iomem *regs) > +{ > + struct dcmipp_bytecap_device *vcap; > + struct v4l2_pix_format *format; > + struct video_device *vdev; > + struct vb2_queue *q; > + int ret = 0; > + > + /* Allocate the dcmipp_bytecap_device struct */ > + vcap = kzalloc(sizeof(*vcap), GFP_KERNEL); > + if (!vcap) > + return ERR_PTR(-ENOMEM); > + > + /* Allocate the pads */ > + vcap->ved.pads = > + dcmipp_pads_init(1, > + (const unsigned long[1]) {MEDIA_PAD_FL_SINK}); > + if (IS_ERR(vcap->ved.pads)) { > + ret = PTR_ERR(vcap->ved.pads); > + goto err_free_vcap; > + } > + > + /* Initialize the media entity */ > + vcap->vdev.entity.name = entity_name; > + vcap->vdev.entity.function = MEDIA_ENT_F_IO_V4L; > + ret = media_entity_pads_init(&vcap->vdev.entity, 1, vcap->ved.pads); > + if (ret) > + goto err_clean_pads; > + > + /* Initialize the lock */ > + mutex_init(&vcap->lock); > + > + /* Initialize the vb2 queue */ > + q = &vcap->queue; > + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; > + q->io_modes = VB2_MMAP | VB2_DMABUF; > + q->lock = &vcap->lock; > + q->drv_priv = vcap; > + q->buf_struct_size = sizeof(struct dcmipp_buf); > + q->ops = &dcmipp_bytecap_qops; > + q->mem_ops = &vb2_dma_contig_memops; > + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; > + q->min_buffers_needed = 1; > + q->dev = dev; > + > + /* DCMIPP requires 16 bytes aligned buffers */ > + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32) & ~0x0f); > + if (ret) { > + dev_err(dev, "Failed to set DMA mask\n"); > + goto err_clean_pads; > + } > + > + ret = vb2_queue_init(q); > + if (ret) { > + dev_err(dev, "%s: vb2 queue init failed (err=%d)\n", > + entity_name, ret); > + goto err_clean_m_ent; > + } > + > + /* Initialize buffer list and its lock */ > + INIT_LIST_HEAD(&vcap->buffers); > + spin_lock_init(&vcap->irqlock); > + > + /* Set default frame format */ > + vcap->format = fmt_default; > + format = &vcap->format; > + format->bytesperline = dcmipp_frame_stride(format->width, > + format->pixelformat); > + format->sizeimage = dcmipp_frame_size(format->width, format->height, > + format->pixelformat); > + > + /* Fill the dcmipp_ent_device struct */ > + vcap->ved.ent = &vcap->vdev.entity; > + vcap->ved.handler = dcmipp_bytecap_irq_callback; > + vcap->ved.thread_fn = dcmipp_bytecap_irq_thread; > + vcap->dev = dev; > + vcap->regs = regs; > + > + /* Initialize the video_device struct */ > + vdev = &vcap->vdev; > + vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | > + V4L2_CAP_IO_MC; > + vdev->release = dcmipp_bytecap_release; > + vdev->fops = &dcmipp_bytecap_fops; > + vdev->ioctl_ops = &dcmipp_bytecap_ioctl_ops; > + vdev->lock = &vcap->lock; > + vdev->queue = q; > + vdev->v4l2_dev = v4l2_dev; > + strscpy(vdev->name, entity_name, sizeof(vdev->name)); > + video_set_drvdata(vdev, &vcap->ved); > + > + /* Register the video_device with the v4l2 and the media framework */ > + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); > + if (ret) { > + dev_err(dev, "%s: video register failed (err=%d)\n", > + vcap->vdev.name, ret); > + goto err_clean_m_ent; > + } > + > + return &vcap->ved; > + > +err_clean_m_ent: > + media_entity_cleanup(&vcap->vdev.entity); > +err_clean_pads: > + dcmipp_pads_cleanup(vcap->ved.pads); > +err_free_vcap: > + kfree(vcap); > + > + return ERR_PTR(ret); > +} > diff --git a/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-byteproc.c b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-byteproc.c > new file mode 100644 > index 000000000000..897869cc8be0 > --- /dev/null > +++ b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-byteproc.c > @@ -0,0 +1,591 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Driver for STM32 Digital Camera Memory Interface Pixel Processor > + * > + * Copyright (C) STMicroelectronics SA 2022 > + * Authors: Hugues Fruchet > + * Alain Volmat > + * for STMicroelectronics. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "dcmipp-common.h" > + > +#define DCMIPP_P0FCTCR 0x500 > +#define DCMIPP_P0FCTCR_FRATE_MASK GENMASK(1, 0) > +#define DCMIPP_P0SCSTR 0x504 > +#define DCMIPP_P0SCSTR_HSTART_SHIFT 0 > +#define DCMIPP_P0SCSTR_VSTART_SHIFT 16 > +#define DCMIPP_P0SCSZR 0x508 > +#define DCMIPP_P0SCSZR_ENABLE BIT(31) > +#define DCMIPP_P0SCSZR_HSIZE_SHIFT 0 > +#define DCMIPP_P0SCSZR_VSIZE_SHIFT 16 > +#define DCMIPP_P0PPCR 0x5c0 > +#define DCMIPP_P0PPCR_BSM_1_2 0x1 > +#define DCMIPP_P0PPCR_BSM_1_4 0x2 > +#define DCMIPP_P0PPCR_BSM_2_4 0x3 > +#define DCMIPP_P0PPCR_BSM_MASK GENMASK(8, 7) > +#define DCMIPP_P0PPCR_BSM_SHIFT 0x7 > +#define DCMIPP_P0PPCR_LSM BIT(10) > +#define DCMIPP_P0PPCR_OELS BIT(11) > + > +#define IS_SINK(pad) (!(pad)) > +#define IS_SRC(pad) ((pad)) > + > +struct dcmipp_byteproc_pix_map { > + unsigned int code; > + unsigned int bpp; > +}; > + > +#define PIXMAP_MBUS_BPP(mbus, byteperpixel) \ > + { \ > + .code = MEDIA_BUS_FMT_##mbus, \ > + .bpp = byteperpixel, \ > + } > +static const struct dcmipp_byteproc_pix_map dcmipp_byteproc_pix_map_list[] = { > + PIXMAP_MBUS_BPP(RGB565_2X8_LE, 2), > + PIXMAP_MBUS_BPP(YUYV8_2X8, 2), > + PIXMAP_MBUS_BPP(YVYU8_2X8, 2), > + PIXMAP_MBUS_BPP(UYVY8_2X8, 2), > + PIXMAP_MBUS_BPP(VYUY8_2X8, 2), > + PIXMAP_MBUS_BPP(Y8_1X8, 1), > + PIXMAP_MBUS_BPP(SBGGR8_1X8, 1), > + PIXMAP_MBUS_BPP(SGBRG8_1X8, 1), > + PIXMAP_MBUS_BPP(SGRBG8_1X8, 1), > + PIXMAP_MBUS_BPP(SRGGB8_1X8, 1), > + PIXMAP_MBUS_BPP(JPEG_1X8, 1), > +}; > + > +static const struct dcmipp_byteproc_pix_map * > +dcmipp_byteproc_pix_map_by_code(u32 code) > +{ > + unsigned int i; > + > + for (i = 0; i < ARRAY_SIZE(dcmipp_byteproc_pix_map_list); i++) { > + if (dcmipp_byteproc_pix_map_list[i].code == code) > + return &dcmipp_byteproc_pix_map_list[i]; > + } > + > + return NULL; > +} > + > +struct dcmipp_byteproc_device { > + struct dcmipp_ent_device ved; > + struct v4l2_subdev sd; > + struct device *dev; > + void __iomem *regs; > + bool streaming; > +}; > + > +static const struct v4l2_mbus_framefmt fmt_default = { > + .width = DCMIPP_FMT_WIDTH_DEFAULT, > + .height = DCMIPP_FMT_HEIGHT_DEFAULT, > + .code = MEDIA_BUS_FMT_RGB565_2X8_LE, > + .field = V4L2_FIELD_NONE, > + .colorspace = DCMIPP_COLORSPACE_DEFAULT, > + .ycbcr_enc = DCMIPP_YCBCR_ENC_DEFAULT, > + .quantization = DCMIPP_QUANTIZATION_DEFAULT, > + .xfer_func = DCMIPP_XFER_FUNC_DEFAULT, > +}; > + > +static const struct v4l2_rect crop_min = { > + .width = DCMIPP_FRAME_MIN_WIDTH, > + .height = DCMIPP_FRAME_MIN_HEIGHT, > + .top = 0, > + .left = 0, > +}; > + > +static void dcmipp_byteproc_adjust_crop(struct v4l2_rect *r, > + struct v4l2_rect *compose) > +{ > + /* Disallow rectangles smaller than the minimal one. */ > + v4l2_rect_set_min_size(r, &crop_min); > + v4l2_rect_map_inside(r, compose); > +} > + > +static void dcmipp_byteproc_adjust_compose(struct v4l2_rect *r, > + const struct v4l2_mbus_framefmt *fmt) > +{ > + r->top = 0; > + r->left = 0; > + > + /* Compose is not possible for JPEG or Bayer formats */ > + if (fmt->code == MEDIA_BUS_FMT_JPEG_1X8 || > + fmt->code == MEDIA_BUS_FMT_SBGGR8_1X8 || > + fmt->code == MEDIA_BUS_FMT_SGBRG8_1X8 || > + fmt->code == MEDIA_BUS_FMT_SGRBG8_1X8 || > + fmt->code == MEDIA_BUS_FMT_SRGGB8_1X8) { > + r->width = fmt->width; > + r->height = fmt->height; > + return; > + } > + > + /* Adjust height - we can only perform 1/2 decimation */ > + if (r->height <= (fmt->height / 2)) > + r->height = fmt->height / 2; > + else > + r->height = fmt->height; > + > + /* Adjust width /2 or /4 for 8bits formats and /2 for 16bits formats */ > + if (fmt->code == MEDIA_BUS_FMT_Y8_1X8 && r->width <= (fmt->width / 4)) > + r->width = fmt->width / 4; > + else if (r->width <= (fmt->width / 2)) > + r->width = fmt->width / 2; > + else > + r->width = fmt->width; > +} > + > +static void dcmipp_byteproc_adjust_fmt(struct v4l2_mbus_framefmt *fmt) > +{ > + const struct dcmipp_byteproc_pix_map *vpix; > + > + /* Only accept code in the pix map table */ > + vpix = dcmipp_byteproc_pix_map_by_code(fmt->code); > + if (!vpix) > + fmt->code = fmt_default.code; > + > + fmt->width = clamp_t(u32, fmt->width, DCMIPP_FRAME_MIN_WIDTH, > + DCMIPP_FRAME_MAX_WIDTH) & ~1; > + fmt->height = clamp_t(u32, fmt->height, DCMIPP_FRAME_MIN_HEIGHT, > + DCMIPP_FRAME_MAX_HEIGHT) & ~1; > + > + if (fmt->field == V4L2_FIELD_ANY || fmt->field == V4L2_FIELD_ALTERNATE) > + fmt->field = fmt_default.field; > + > + dcmipp_colorimetry_clamp(fmt); > +} > + > +static int dcmipp_byteproc_init_cfg(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *sd_state) > +{ > + unsigned int i; > + > + for (i = 0; i < sd->entity.num_pads; i++) { > + struct v4l2_mbus_framefmt *mf; > + struct v4l2_rect *r; > + > + mf = v4l2_subdev_get_try_format(sd, sd_state, i); > + *mf = fmt_default; > + > + if (IS_SINK(i)) > + r = v4l2_subdev_get_try_compose(sd, sd_state, i); > + else > + r = v4l2_subdev_get_try_crop(sd, sd_state, i); > + > + r->top = 0; > + r->left = 0; > + r->width = DCMIPP_FMT_WIDTH_DEFAULT; > + r->height = DCMIPP_FMT_HEIGHT_DEFAULT; > + } > + > + return 0; > +} > + > +static int > +dcmipp_byteproc_enum_mbus_code(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *sd_state, > + struct v4l2_subdev_mbus_code_enum *code) > +{ > + const struct dcmipp_byteproc_pix_map *vpix; > + struct v4l2_mbus_framefmt *sink_fmt; > + > + if (IS_SINK(code->pad)) { > + if (code->index >= ARRAY_SIZE(dcmipp_byteproc_pix_map_list)) > + return -EINVAL; > + vpix = &dcmipp_byteproc_pix_map_list[code->index]; > + code->code = vpix->code; > + } else { > + /* byteproc doesn't support transformation on format */ > + if (code->index > 0) > + return -EINVAL; > + > + sink_fmt = v4l2_subdev_get_pad_format(sd, sd_state, 0); > + code->code = sink_fmt->code; > + } > + > + return 0; > +} > + > +static int > +dcmipp_byteproc_enum_frame_size(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *sd_state, > + struct v4l2_subdev_frame_size_enum *fse) > +{ > + struct v4l2_rect *compose; > + > + if (fse->index) > + return -EINVAL; > + > + fse->min_width = DCMIPP_FRAME_MIN_WIDTH; > + fse->min_height = DCMIPP_FRAME_MIN_HEIGHT; > + > + if (IS_SINK(fse->pad)) { > + fse->max_width = DCMIPP_FRAME_MAX_WIDTH; > + fse->max_height = DCMIPP_FRAME_MAX_HEIGHT; > + } else { > + compose = v4l2_subdev_get_pad_compose(sd, sd_state, 0); > + fse->max_width = compose->width; > + fse->max_height = compose->height; > + } > + > + return 0; > +} > + > +static int dcmipp_byteproc_get_fmt(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *sd_state, > + struct v4l2_subdev_format *fmt) > +{ > + struct v4l2_rect *crop_rect; > + > + fmt->format = *v4l2_subdev_get_pad_format(sd, sd_state, 0); > + crop_rect = v4l2_subdev_get_pad_crop(sd, sd_state, 1); > + > + if (IS_SRC(fmt->pad)) { > + fmt->format.width = crop_rect->width; > + fmt->format.height = crop_rect->height; > + } Is this necessary since you're setting the format.width to account for the crop in the s_fmt() callback below? I think you could probably drop this whole function and use v4l2_subdev_get_fmt() > + > + return 0; > +} > + > +static int dcmipp_byteproc_set_fmt(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *sd_state, > + struct v4l2_subdev_format *fmt) > +{ > + struct dcmipp_byteproc_device *byteproc = v4l2_get_subdevdata(sd); > + struct v4l2_mbus_framefmt *sink_fmt; > + struct v4l2_rect *crop, *compose; > + > + if (byteproc->streaming) > + return -EBUSY; > + > + sink_fmt = v4l2_subdev_get_pad_format(sd, sd_state, 0); > + crop = v4l2_subdev_get_pad_crop(sd, sd_state, 1); > + compose = v4l2_subdev_get_pad_compose(sd, sd_state, 0); > + > + if (IS_SRC(fmt->pad)) { > + fmt->format = *sink_fmt; > + fmt->format.width = crop->width; > + fmt->format.height = crop->height; > + } else { > + dcmipp_byteproc_adjust_fmt(&fmt->format); > + crop->top = 0; > + crop->left = 0; > + crop->width = fmt->format.width; > + crop->height = fmt->format.height; > + *compose = *crop; > + *sink_fmt = fmt->format; > + } > + > + return 0; > +} > + > +static int dcmipp_byteproc_get_selection(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *sd_state, > + struct v4l2_subdev_selection *s) > +{ > + struct v4l2_mbus_framefmt *sink_fmt; > + struct v4l2_rect *crop, *compose; > + > + /* > + * In the HW, the decimation block is located prior to the crop hence: > + * Compose is done on the sink pad > + * Crop is done on the src pad > + */ > + if (IS_SINK(s->pad) && > + (s->target == V4L2_SEL_TGT_CROP || > + s->target == V4L2_SEL_TGT_CROP_BOUNDS || > + s->target == V4L2_SEL_TGT_CROP_DEFAULT)) > + return -EINVAL; > + > + if (IS_SRC(s->pad) && > + (s->target == V4L2_SEL_TGT_COMPOSE || > + s->target == V4L2_SEL_TGT_COMPOSE_BOUNDS || > + s->target == V4L2_SEL_TGT_COMPOSE_DEFAULT)) > + return -EINVAL; > + > + sink_fmt = v4l2_subdev_get_pad_format(sd, sd_state, 0); > + crop = v4l2_subdev_get_pad_crop(sd, sd_state, 1); > + compose = v4l2_subdev_get_pad_compose(sd, sd_state, 0); > + > + switch (s->target) { > + case V4L2_SEL_TGT_CROP: > + s->r = *crop; > + break; > + case V4L2_SEL_TGT_CROP_BOUNDS: > + case V4L2_SEL_TGT_CROP_DEFAULT: > + s->r = *compose; > + break; > + case V4L2_SEL_TGT_COMPOSE: > + s->r = *compose; > + break; > + case V4L2_SEL_TGT_COMPOSE_BOUNDS: > + case V4L2_SEL_TGT_COMPOSE_DEFAULT: > + s->r.top = 0; > + s->r.left = 0; > + s->r.width = sink_fmt->width; > + s->r.height = sink_fmt->height; > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int dcmipp_byteproc_set_selection(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *sd_state, > + struct v4l2_subdev_selection *s) > +{ > + struct dcmipp_byteproc_device *byteproc = v4l2_get_subdevdata(sd); > + struct v4l2_mbus_framefmt *sink_fmt; > + struct v4l2_rect *crop, *compose; > + > + /* > + * In the HW, the decimation block is located prior to the crop hence: > + * Compose is done on the sink pad > + * Crop is done on the src pad > + */ > + if ((s->target == V4L2_SEL_TGT_CROP || > + s->target == V4L2_SEL_TGT_CROP_BOUNDS || > + s->target == V4L2_SEL_TGT_CROP_DEFAULT) && IS_SINK(s->pad)) > + return -EINVAL; > + > + if ((s->target == V4L2_SEL_TGT_COMPOSE || > + s->target == V4L2_SEL_TGT_COMPOSE_BOUNDS || > + s->target == V4L2_SEL_TGT_COMPOSE_DEFAULT) && IS_SRC(s->pad)) > + return -EINVAL; > + > + sink_fmt = v4l2_subdev_get_pad_format(sd, sd_state, 0); > + crop = v4l2_subdev_get_pad_crop(sd, sd_state, 1); > + compose = v4l2_subdev_get_pad_compose(sd, sd_state, 0); > + > + switch (s->target) { > + case V4L2_SEL_TGT_CROP: > + dcmipp_byteproc_adjust_crop(&s->r, compose); > + > + *crop = s->r; > + > + dev_dbg(byteproc->dev, "s_selection: crop %ux%u@(%u,%u)\n", > + crop->width, crop->height, crop->left, crop->top); > + break; > + case V4L2_SEL_TGT_COMPOSE: > + dcmipp_byteproc_adjust_compose(&s->r, sink_fmt); > + *compose = s->r; > + *crop = s->r; > + > + dev_dbg(byteproc->dev, "s_selection: compose %ux%u@(%u,%u)\n", > + compose->width, compose->height, > + compose->left, compose->top); > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static const struct v4l2_subdev_pad_ops dcmipp_byteproc_pad_ops = { > + .init_cfg = dcmipp_byteproc_init_cfg, > + .enum_mbus_code = dcmipp_byteproc_enum_mbus_code, > + .enum_frame_size = dcmipp_byteproc_enum_frame_size, > + .get_fmt = dcmipp_byteproc_get_fmt, > + .set_fmt = dcmipp_byteproc_set_fmt, > + .get_selection = dcmipp_byteproc_get_selection, > + .set_selection = dcmipp_byteproc_set_selection, > +}; > + > +static int dcmipp_byteproc_configure_scale_crop > + (struct dcmipp_byteproc_device *byteproc) > +{ > + const struct dcmipp_byteproc_pix_map *vpix; > + struct v4l2_subdev_state *state; > + struct v4l2_mbus_framefmt *sink_fmt; > + u32 hprediv, vprediv; > + struct v4l2_rect *compose, *crop; > + u32 val = 0; > + > + state = v4l2_subdev_lock_and_get_active_state(&byteproc->sd); > + sink_fmt = v4l2_subdev_get_pad_format(&byteproc->sd, state, 0); > + compose = v4l2_subdev_get_pad_compose(&byteproc->sd, state, 0); > + crop = v4l2_subdev_get_pad_crop(&byteproc->sd, state, 1); > + v4l2_subdev_unlock_state(state); > + > + /* find output format bpp */ > + vpix = dcmipp_byteproc_pix_map_by_code(sink_fmt->code); > + if (!vpix) > + return -EINVAL; > + > + /* clear decimation/crop */ > + reg_clear(byteproc, DCMIPP_P0PPCR, DCMIPP_P0PPCR_BSM_MASK); > + reg_clear(byteproc, DCMIPP_P0PPCR, DCMIPP_P0PPCR_LSM); > + reg_write(byteproc, DCMIPP_P0SCSTR, 0); > + reg_write(byteproc, DCMIPP_P0SCSZR, 0); > + > + /* Ignore decimation/crop with JPEG */ > + if (vpix->code == MEDIA_BUS_FMT_JPEG_1X8) > + return 0; > + > + /* decimation */ > + hprediv = sink_fmt->width / compose->width; > + if (hprediv == 4) > + val |= DCMIPP_P0PPCR_BSM_1_4 << DCMIPP_P0PPCR_BSM_SHIFT; > + else if ((vpix->code == MEDIA_BUS_FMT_Y8_1X8) && (hprediv == 2)) > + val |= DCMIPP_P0PPCR_BSM_1_2 << DCMIPP_P0PPCR_BSM_SHIFT; > + else if (hprediv == 2) > + val |= DCMIPP_P0PPCR_BSM_2_4 << DCMIPP_P0PPCR_BSM_SHIFT; > + > + vprediv = sink_fmt->height / compose->height; > + if (vprediv == 2) > + val |= DCMIPP_P0PPCR_LSM | DCMIPP_P0PPCR_OELS; > + > + /* decimate using bytes and lines skipping */ > + if (val) { > + reg_set(byteproc, DCMIPP_P0PPCR, val); > + > + dev_dbg(byteproc->dev, "decimate to %dx%d [prediv=%dx%d]\n", > + compose->width, compose->height, > + hprediv, vprediv); > + } > + > + dev_dbg(byteproc->dev, "crop to %dx%d\n", crop->width, crop->height); > + > + /* expressed in 32-bits words on X axis, lines on Y axis */ > + reg_write(byteproc, DCMIPP_P0SCSTR, > + (((crop->left * vpix->bpp) / 4) << > + DCMIPP_P0SCSTR_HSTART_SHIFT) | > + (crop->top << DCMIPP_P0SCSTR_VSTART_SHIFT)); > + reg_write(byteproc, DCMIPP_P0SCSZR, > + DCMIPP_P0SCSZR_ENABLE | > + (((crop->width * vpix->bpp) / 4) << > + DCMIPP_P0SCSZR_HSIZE_SHIFT) | > + (crop->height << DCMIPP_P0SCSZR_VSIZE_SHIFT)); > + > + return 0; > +} > + > +static int dcmipp_byteproc_s_stream(struct v4l2_subdev *sd, int enable) > +{ > + struct dcmipp_byteproc_device *byteproc = v4l2_get_subdevdata(sd); > + struct v4l2_subdev *s_subdev; > + struct media_pad *pad; > + int ret = 0; > + > + /* Get source subdev */ > + pad = media_pad_remote_pad_first(&sd->entity.pads[0]); > + if (!pad || !is_media_entity_v4l2_subdev(pad->entity)) > + return -EINVAL; > + s_subdev = media_entity_to_v4l2_subdev(pad->entity); > + > + if (enable) { > + ret = dcmipp_byteproc_configure_scale_crop(byteproc); > + if (ret) > + return ret; > + > + ret = v4l2_subdev_call(s_subdev, video, s_stream, enable); > + if (ret < 0) { > + dev_err(byteproc->dev, > + "failed to start source subdev streaming (%d)\n", > + ret); > + return ret; > + } > + } else { > + ret = v4l2_subdev_call(s_subdev, video, s_stream, enable); > + if (ret < 0) { > + dev_err(byteproc->dev, > + "failed to stop source subdev streaming (%d)\n", > + ret); > + return ret; > + } > + } > + > + byteproc->streaming = enable; > + > + return 0; > +} > + > +static const struct v4l2_subdev_video_ops dcmipp_byteproc_video_ops = { > + .s_stream = dcmipp_byteproc_s_stream, > +}; > + > +static const struct v4l2_subdev_ops dcmipp_byteproc_ops = { > + .pad = &dcmipp_byteproc_pad_ops, > + .video = &dcmipp_byteproc_video_ops, > +}; > + > +static void dcmipp_byteproc_release(struct v4l2_subdev *sd) > +{ > + struct dcmipp_byteproc_device *byteproc = v4l2_get_subdevdata(sd); > + > + kfree(byteproc); > +} > + > +static const struct v4l2_subdev_internal_ops dcmipp_byteproc_int_ops = { > + .release = dcmipp_byteproc_release, > +}; > + > +void dcmipp_byteproc_ent_release(struct dcmipp_ent_device *ved) > +{ > + struct dcmipp_byteproc_device *byteproc = > + container_of(ved, struct dcmipp_byteproc_device, ved); > + > + dcmipp_ent_sd_unregister(ved, &byteproc->sd); > +} > + > +struct dcmipp_ent_device * > +dcmipp_byteproc_ent_init(struct device *dev, const char *entity_name, > + struct v4l2_device *v4l2_dev, void __iomem *regs) > +{ > + struct dcmipp_byteproc_device *byteproc; > + struct v4l2_subdev_state *state; > + struct v4l2_mbus_framefmt *sink_fmt; > + struct v4l2_rect *compose, *crop; > + struct v4l2_rect r = { > + .top = 0, > + .left = 0, > + .width = DCMIPP_FMT_WIDTH_DEFAULT, > + .height = DCMIPP_FMT_HEIGHT_DEFAULT, > + }; > + int ret; > + > + /* Allocate the byteproc struct */ > + byteproc = kzalloc(sizeof(*byteproc), GFP_KERNEL); > + if (!byteproc) > + return ERR_PTR(-ENOMEM); > + > + byteproc->regs = regs; > + > + /* Initialize ved and sd */ > + ret = dcmipp_ent_sd_register(&byteproc->ved, &byteproc->sd, > + v4l2_dev, entity_name, > + MEDIA_ENT_F_PROC_VIDEO_SCALER, 2, > + (const unsigned long[2]) { > + MEDIA_PAD_FL_SINK, > + MEDIA_PAD_FL_SOURCE, > + }, > + &dcmipp_byteproc_int_ops, > + &dcmipp_byteproc_ops, > + NULL, NULL); > + if (ret) { > + kfree(byteproc); > + return ERR_PTR(ret); > + } > + > + byteproc->dev = dev; > + > + /* Initialize the frame format */ > + state = v4l2_subdev_lock_and_get_active_state(&byteproc->sd); > + sink_fmt = v4l2_subdev_get_pad_format(&byteproc->sd, state, 0); > + *sink_fmt = fmt_default; > + compose = v4l2_subdev_get_pad_compose(&byteproc->sd, state, 0); > + *compose = r; > + crop = v4l2_subdev_get_pad_crop(&byteproc->sd, state, 1); > + *crop = r; > + v4l2_subdev_unlock_state(state); The dcmipp_ent_sd_register path should result in .init_cfg() being called for the subdev I think, which does all this already. So this is probably duplicated effort. > + > + return &byteproc->ved; > +} > diff --git a/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.c b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.c > new file mode 100644 > index 000000000000..76016955dc1d > --- /dev/null > +++ b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.c > @@ -0,0 +1,106 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Driver for STM32 Digital Camera Memory Interface Pixel Processor > + * > + * Copyright (C) STMicroelectronics SA 2022 > + * Authors: Hugues Fruchet > + * Alain Volmat > + * for STMicroelectronics. > + */ > + > +#include > +#include > + > +#include "dcmipp-common.h" > + > +/* Helper function to allocate and initialize pads */ > +struct media_pad *dcmipp_pads_init(u16 num_pads, const unsigned long *pads_flag) > +{ > + struct media_pad *pads; > + unsigned int i; > + > + /* Allocate memory for the pads */ > + pads = kcalloc(num_pads, sizeof(*pads), GFP_KERNEL); > + if (!pads) > + return ERR_PTR(-ENOMEM); > + > + /* Initialize the pads */ > + for (i = 0; i < num_pads; i++) { > + pads[i].index = i; > + pads[i].flags = pads_flag[i]; > + } > + > + return pads; > +} > + > +int dcmipp_ent_sd_register(struct dcmipp_ent_device *ved, > + struct v4l2_subdev *sd, > + struct v4l2_device *v4l2_dev, > + const char *const name, > + u32 function, > + u16 num_pads, > + const unsigned long *pads_flag, > + const struct v4l2_subdev_internal_ops *sd_int_ops, > + const struct v4l2_subdev_ops *sd_ops, > + irq_handler_t handler, > + irq_handler_t thread_fn) > +{ > + int ret; > + > + /* Allocate the pads. Should be released from the sd_int_op release */ > + ved->pads = dcmipp_pads_init(num_pads, pads_flag); > + if (IS_ERR(ved->pads)) > + return PTR_ERR(ved->pads); > + > + /* Fill the dcmipp_ent_device struct */ > + ved->ent = &sd->entity; > + > + /* Initialize the subdev */ > + v4l2_subdev_init(sd, sd_ops); > + sd->internal_ops = sd_int_ops; > + sd->entity.function = function; > + sd->owner = THIS_MODULE; > + strscpy(sd->name, name, sizeof(sd->name)); > + v4l2_set_subdevdata(sd, ved); > + > + /* Expose this subdev to user space */ > + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > + if (sd->ctrl_handler) > + sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS; > + > + /* Initialize the media entity */ > + ret = media_entity_pads_init(&sd->entity, num_pads, ved->pads); > + if (ret) > + goto err_clean_pads; > + > + ret = v4l2_subdev_init_finalize(sd); > + if (ret < 0) > + goto err_clean_m_ent; > + > + /* Register the subdev with the v4l2 and the media framework */ > + ret = v4l2_device_register_subdev(v4l2_dev, sd); > + if (ret) { > + dev_err(v4l2_dev->dev, > + "%s: subdev register failed (err=%d)\n", > + name, ret); > + goto err_clean_m_ent; > + } > + > + ved->handler = handler; > + ved->thread_fn = thread_fn; > + > + return 0; > + > +err_clean_m_ent: > + media_entity_cleanup(&sd->entity); > +err_clean_pads: > + dcmipp_pads_cleanup(ved->pads); > + return ret; > +} > + > +void > +dcmipp_ent_sd_unregister(struct dcmipp_ent_device *ved, struct v4l2_subdev *sd) > +{ > + media_entity_cleanup(ved->ent); > + v4l2_device_unregister_subdev(sd); > +} > diff --git a/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.h b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.h > new file mode 100644 > index 000000000000..8f1f0c9bbc01 > --- /dev/null > +++ b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.h > @@ -0,0 +1,207 @@ > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > +/* > + * Driver for STM32 Digital Camera Memory Interface Pixel Processor > + * > + * Copyright (C) STMicroelectronics SA 2022 > + * Authors: Hugues Fruchet > + * Alain Volmat > + * for STMicroelectronics. > + */ > + > +#ifndef _DCMIPP_COMMON_H_ > +#define _DCMIPP_COMMON_H_ > + > +#include > +#include > +#include > +#include > +#include > + > +#define DCMIPP_PDEV_NAME "dcmipp" > + > +#define DCMIPP_FRAME_MAX_WIDTH 4096 > +#define DCMIPP_FRAME_MAX_HEIGHT 2160 > +#define DCMIPP_FRAME_MIN_WIDTH 16 > +#define DCMIPP_FRAME_MIN_HEIGHT 16 > + > +#define DCMIPP_FMT_WIDTH_DEFAULT 640 > +#define DCMIPP_FMT_HEIGHT_DEFAULT 480 > + > +#define DCMIPP_COLORSPACE_DEFAULT V4L2_COLORSPACE_REC709 > +#define DCMIPP_YCBCR_ENC_DEFAULT V4L2_YCBCR_ENC_DEFAULT > +#define DCMIPP_QUANTIZATION_DEFAULT V4L2_QUANTIZATION_DEFAULT > +#define DCMIPP_XFER_FUNC_DEFAULT V4L2_XFER_FUNC_DEFAULT > + > +/** > + * struct dcmipp_colorimetry_clamp - Adjust colorimetry parameters > + * > + * @fmt: the pointer to struct v4l2_pix_format or > + * struct v4l2_mbus_framefmt > + * > + * Entities must check if colorimetry given by the userspace is valid, if not > + * then set them as DEFAULT > + */ > +#define dcmipp_colorimetry_clamp(fmt) \ > +do { \ > + if ((fmt)->colorspace == V4L2_COLORSPACE_DEFAULT || \ > + (fmt)->colorspace > V4L2_COLORSPACE_DCI_P3) { \ > + (fmt)->colorspace = DCMIPP_COLORSPACE_DEFAULT; \ > + (fmt)->ycbcr_enc = DCMIPP_YCBCR_ENC_DEFAULT; \ > + (fmt)->quantization = DCMIPP_QUANTIZATION_DEFAULT; \ > + (fmt)->xfer_func = DCMIPP_XFER_FUNC_DEFAULT; \ > + } \ > + if ((fmt)->ycbcr_enc > V4L2_YCBCR_ENC_SMPTE240M) \ > + (fmt)->ycbcr_enc = DCMIPP_YCBCR_ENC_DEFAULT; \ > + if ((fmt)->quantization > V4L2_QUANTIZATION_LIM_RANGE) \ > + (fmt)->quantization = DCMIPP_QUANTIZATION_DEFAULT; \ > + if ((fmt)->xfer_func > V4L2_XFER_FUNC_SMPTE2084) \ > + (fmt)->xfer_func = DCMIPP_XFER_FUNC_DEFAULT; \ > +} while (0) > + > +/** > + * struct dcmipp_ent_device - core struct that represents a node in the topology > + * > + * @ent: the pointer to struct media_entity for the node > + * @pads: the list of pads of the node > + * @process_frame: callback send a frame to that node A hangover? I can't see a member called process_frame. There's also some members missing from the documentation here and whilst I wouldn't ordinarily bother mentioning that I think in this case given the way the IRQ handling is working it might be beneficial to explain why they're embedded here rather than just assigned at probe. > + * > + * Each node of the topology must create a dcmipp_ent_device struct. > + * Depending on the node it will be of an instance of v4l2_subdev or > + * video_device struct where both contains a struct media_entity. > + * Those structures should embedded the dcmipp_ent_device struct through > + * v4l2_set_subdevdata() and video_set_drvdata() respectivaly, allowing the > + * dcmipp_ent_device struct to be retrieved from the corresponding struct > + * media_entity > + */ > +struct dcmipp_ent_device { > + struct media_entity *ent; > + struct media_pad *pads; > + > + /* Parallel input device */ > + struct v4l2_mbus_config_parallel bus; > + enum v4l2_mbus_type bus_type; > + irq_handler_t handler; > + irqreturn_t handler_ret; > + irq_handler_t thread_fn; > +}; > + > +/** > + * dcmipp_pads_init - initialize pads > + * > + * @num_pads: number of pads to initialize > + * @pads_flags: flags to use in each pad > + * > + * Helper functions to allocate/initialize pads > + */ > +struct media_pad *dcmipp_pads_init(u16 num_pads, > + const unsigned long *pads_flag); > + > +/** > + * dcmipp_pads_cleanup - free pads > + * > + * @pads: pointer to the pads > + * > + * Helper function to free the pads initialized with dcmipp_pads_init > + */ > +static inline void dcmipp_pads_cleanup(struct media_pad *pads) > +{ > + kfree(pads); > +} > + > +/** > + * dcmipp_ent_sd_register - initialize and register a subdev node > + * > + * @ved: the dcmipp_ent_device struct to be initialize > + * @sd: the v4l2_subdev struct to be initialize and registered > + * @v4l2_dev: the v4l2 device to register the v4l2_subdev > + * @name: name of the sub-device. Please notice that the name must be > + * unique. > + * @function: media entity function defined by MEDIA_ENT_F_* macros > + * @num_pads: number of pads to initialize > + * @pads_flag: flags to use in each pad > + * @sd_int_ops: pointer to &struct v4l2_subdev_internal_ops > + * @sd_ops: pointer to &struct v4l2_subdev_ops. > + * > + * Helper function initialize and register the struct dcmipp_ent_device and > + * struct v4l2_subdev which represents a subdev node in the topology > + */ > +int dcmipp_ent_sd_register(struct dcmipp_ent_device *ved, > + struct v4l2_subdev *sd, > + struct v4l2_device *v4l2_dev, > + const char *const name, > + u32 function, > + u16 num_pads, > + const unsigned long *pads_flag, > + const struct v4l2_subdev_internal_ops *sd_int_ops, > + const struct v4l2_subdev_ops *sd_ops, > + irq_handler_t handler, > + irq_handler_t thread_fn); > + > +/** > + * dcmipp_ent_sd_unregister - cleanup and unregister a subdev node > + * > + * @ved: the dcmipp_ent_device struct to be cleaned up > + * @sd: the v4l2_subdev struct to be unregistered > + * > + * Helper function cleanup and unregister the struct dcmipp_ent_device and > + * struct v4l2_subdev which represents a subdev node in the topology > + */ > +void dcmipp_ent_sd_unregister(struct dcmipp_ent_device *ved, > + struct v4l2_subdev *sd); > + > +#define reg_write(device, reg, val) \ > + (__reg_write((device)->dev, (device)->regs, (reg), (val))) > +#define reg_read(device, reg) \ > + (__reg_read((device)->dev, (device)->regs, (reg))) > +#define reg_set(device, reg, mask) \ > + (__reg_set((device)->dev, (device)->regs, (reg), (mask))) > +#define reg_clear(device, reg, mask) \ > + (__reg_clear((device)->dev, (device)->regs, (reg), (mask))) > + > +static inline u32 __reg_read(struct device *dev, void __iomem *base, u32 reg) > +{ > + u32 val = readl_relaxed(base + reg); > + > + dev_dbg(dev, "RD 0x%x %#10.8x\n", reg, val); > + return val; > +} > + > +static inline void __reg_write(struct device *dev, void __iomem *base, u32 reg, > + u32 val) > +{ > + dev_dbg(dev, "WR 0x%x %#10.8x\n", reg, val); > + writel_relaxed(val, base + reg); > +} > + > +static inline void __reg_set(struct device *dev, void __iomem *base, u32 reg, > + u32 mask) > +{ > + dev_dbg(dev, "SET 0x%x %#10.8x\n", reg, mask); > + __reg_write(dev, base, reg, readl_relaxed(base + reg) | mask); > +} > + > +static inline void __reg_clear(struct device *dev, void __iomem *base, u32 reg, > + u32 mask) > +{ > + dev_dbg(dev, "CLR 0x%x %#10.8x\n", reg, mask); > + __reg_write(dev, base, reg, readl_relaxed(base + reg) & ~mask); > +} > + > +/* DCMIPP subdev init / release entry points */ > +struct dcmipp_ent_device *dcmipp_par_ent_init(struct device *dev, > + const char *entity_name, > + struct v4l2_device *v4l2_dev, > + void __iomem *regs); > +void dcmipp_par_ent_release(struct dcmipp_ent_device *ved); > +struct dcmipp_ent_device * > +dcmipp_byteproc_ent_init(struct device *dev, const char *entity_name, > + struct v4l2_device *v4l2_dev, void __iomem *regs); > +void dcmipp_byteproc_ent_release(struct dcmipp_ent_device *ved); > +struct dcmipp_ent_device *dcmipp_bytecap_ent_init(struct device *dev, > + const char *entity_name, > + struct v4l2_device *v4l2_dev, > + void __iomem *regs); > +void dcmipp_bytecap_ent_release(struct dcmipp_ent_device *ved); > + > +#endif > + > diff --git a/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-core.c b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-core.c > new file mode 100644 > index 000000000000..c8fccfb6f4b4 > --- /dev/null > +++ b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-core.c > @@ -0,0 +1,603 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Driver for STM32 Digital Camera Memory Interface Pixel Processor > + * > + * Copyright (C) STMicroelectronics SA 2022 > + * Authors: Hugues Fruchet > + * Alain Volmat > + * for STMicroelectronics. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "dcmipp-common.h" > + > +#define DCMIPP_MDEV_MODEL_NAME "DCMIPP MDEV" > + > +#define DCMIPP_ENT_LINK(src, srcpad, sink, sinkpad, link_flags) { \ > + .src_ent = src, \ > + .src_pad = srcpad, \ > + .sink_ent = sink, \ > + .sink_pad = sinkpad, \ > + .flags = link_flags, \ > +} > + > +struct dcmipp_device { > + /* The platform device */ > + struct platform_device pdev; > + struct device *dev; > + > + /* Hardware resources */ > + struct reset_control *rstc; > + void __iomem *regs; > + struct clk *kclk; > + > + /* The pipeline configuration */ > + const struct dcmipp_pipeline_config *pipe_cfg; > + > + /* The Associated media_device parent */ > + struct media_device mdev; > + > + /* Internal v4l2 parent device*/ > + struct v4l2_device v4l2_dev; > + > + /* Entities */ > + struct dcmipp_ent_device **entity; > + > + struct v4l2_async_notifier notifier; > +}; > + > +static inline struct dcmipp_device * > +notifier_to_dcmipp(struct v4l2_async_notifier *n) > +{ > + return container_of(n, struct dcmipp_device, notifier); > +} > + > +/* Structure which describes individual configuration for each entity */ > +struct dcmipp_ent_config { > + const char *name; > + struct dcmipp_ent_device *(*init) > + (struct device *dev, const char *entity_name, > + struct v4l2_device *v4l2_dev, void __iomem *regs); > + void (*release)(struct dcmipp_ent_device *ved); > +}; > + > +/* Structure which describes links between entities */ > +struct dcmipp_ent_link { > + unsigned int src_ent; > + u16 src_pad; > + unsigned int sink_ent; > + u16 sink_pad; > + u32 flags; > +}; > + > +/* Structure which describes the whole topology */ > +struct dcmipp_pipeline_config { > + const struct dcmipp_ent_config *ents; > + size_t num_ents; > + const struct dcmipp_ent_link *links; > + size_t num_links; > +}; > + > +/* -------------------------------------------------------------------------- > + * Topology Configuration > + */ > + > +static const struct dcmipp_ent_config stm32mp13_ent_config[] = { > + { > + .name = "dcmipp_parallel", > + .init = dcmipp_par_ent_init, > + .release = dcmipp_par_ent_release, > + }, > + { > + .name = "dcmipp_dump_postproc", > + .init = dcmipp_byteproc_ent_init, > + .release = dcmipp_byteproc_ent_release, > + }, > + { > + .name = "dcmipp_dump_capture", > + .init = dcmipp_bytecap_ent_init, > + .release = dcmipp_bytecap_ent_release, > + }, > +}; > + > +#define ID_PARALLEL 0 > +#define ID_DUMP_BYTEPROC 1 > +#define ID_DUMP_CAPTURE 2 > + > +static const struct dcmipp_ent_link stm32mp13_ent_links[] = { > + DCMIPP_ENT_LINK(ID_PARALLEL, 1, ID_DUMP_BYTEPROC, 0, > + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE), > + DCMIPP_ENT_LINK(ID_DUMP_BYTEPROC, 1, ID_DUMP_CAPTURE, 0, > + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE), > +}; > + > +static const struct dcmipp_pipeline_config stm32mp13_pipe_cfg = { > + .ents = stm32mp13_ent_config, > + .num_ents = ARRAY_SIZE(stm32mp13_ent_config), > + .links = stm32mp13_ent_links, > + .num_links = ARRAY_SIZE(stm32mp13_ent_links) > +}; > + > +#define LINK_FLAG_TO_STR(f) ((f) == 0 ? "" :\ > + (f) == MEDIA_LNK_FL_ENABLED ? "ENABLED" :\ > + (f) == MEDIA_LNK_FL_IMMUTABLE ? "IMMUTABLE" :\ > + (f) == (MEDIA_LNK_FL_ENABLED |\ > + MEDIA_LNK_FL_IMMUTABLE) ?\ > + "ENABLED, IMMUTABLE" :\ > + "UNKNOWN") > + > +static int dcmipp_create_links(struct dcmipp_device *dcmipp) > +{ > + unsigned int i; > + int ret; > + > + /* Initialize the links between entities */ > + for (i = 0; i < dcmipp->pipe_cfg->num_links; i++) { > + const struct dcmipp_ent_link *link = > + &dcmipp->pipe_cfg->links[i]; > + struct dcmipp_ent_device *ved_src = > + dcmipp->entity[link->src_ent]; > + struct dcmipp_ent_device *ved_sink = > + dcmipp->entity[link->sink_ent]; > + > + dev_dbg(dcmipp->dev, "Create link \"%s\":%d -> %d:\"%s\" [%s]\n", > + dcmipp->pipe_cfg->ents[link->src_ent].name, > + link->src_pad, link->sink_pad, > + dcmipp->pipe_cfg->ents[link->sink_ent].name, > + LINK_FLAG_TO_STR(link->flags)); > + > + ret = media_create_pad_link(ved_src->ent, link->src_pad, > + ved_sink->ent, link->sink_pad, > + link->flags); > + if (ret) > + return ret; > + } > + > + return 0; > +} > + > +static int dcmipp_graph_init(struct dcmipp_device *dcmipp); > + > +static int dcmipp_create_subdevs(struct dcmipp_device *dcmipp) > +{ > + int ret, i; > + > + /* Call all subdev inits */ > + for (i = 0; i < dcmipp->pipe_cfg->num_ents; i++) { > + const char *name = dcmipp->pipe_cfg->ents[i].name; > + > + dev_dbg(dcmipp->dev, "add subdev %s\n", name); > + dcmipp->entity[i] = > + dcmipp->pipe_cfg->ents[i].init(dcmipp->dev, name, > + &dcmipp->v4l2_dev, > + dcmipp->regs); > + if (IS_ERR(dcmipp->entity[i])) { > + dev_err(dcmipp->dev, "failed to init subdev %s\n", > + name); > + ret = PTR_ERR(dcmipp->entity[i]); > + goto err_init_entity; > + } > + } > + > + /* Initialize links */ > + ret = dcmipp_create_links(dcmipp); > + if (ret) > + goto err_init_entity; > + > + ret = dcmipp_graph_init(dcmipp); > + if (ret < 0) > + goto err_init_entity; > + > + return 0; > + > +err_init_entity: > + while (i > 0) > + dcmipp->pipe_cfg->ents[i - 1].release(dcmipp->entity[i - 1]); > + return ret; > +} > + > +static const struct of_device_id dcmipp_of_match[] = { > + { .compatible = "st,stm32mp13-dcmipp", .data = &stm32mp13_pipe_cfg }, > + { /* end node */ }, > +}; > +MODULE_DEVICE_TABLE(of, dcmipp_of_match); > + > +static int dcmipp_graph_notify_complete(struct v4l2_async_notifier *notifier) > +{ > + struct dcmipp_device *dcmipp = notifier_to_dcmipp(notifier); > + int ret; > + > + /* Register the media device */ > + ret = media_device_register(&dcmipp->mdev); > + if (ret) { > + dev_err(dcmipp->mdev.dev, > + "media device register failed (err=%d)\n", ret); > + return ret; > + } > + > + /* Expose all subdev's nodes*/ > + ret = v4l2_device_register_subdev_nodes(&dcmipp->v4l2_dev); > + if (ret) { > + dev_err(dcmipp->mdev.dev, > + "dcmipp subdev nodes registration failed (err=%d)\n", > + ret); > + media_device_unregister(&dcmipp->mdev); > + return ret; > + } > + > + dev_dbg(dcmipp->dev, "Notify complete !\n"); > + > + return 0; > +} > + > +static void dcmipp_graph_notify_unbind(struct v4l2_async_notifier *notifier, > + struct v4l2_subdev *sd, > + struct v4l2_async_connection *asd) > +{ > + struct dcmipp_device *dcmipp = notifier_to_dcmipp(notifier); > + > + dev_dbg(dcmipp->dev, "Removing %s\n", sd->name); > +} Can these two functions go next to dcmipp_graph_notify_bound() below? > + > +static irqreturn_t dcmipp_irq_thread(int irq, void *arg) > +{ > + struct dcmipp_device *dcmipp = arg; > + struct dcmipp_ent_device *ved; > + unsigned int i; > + > + /* Call irq thread of each entities of pipeline */ > + for (i = 0; i < dcmipp->pipe_cfg->num_ents; i++) { > + ved = dcmipp->entity[i]; > + if (ved->thread_fn && ved->handler_ret == IRQ_WAKE_THREAD) > + ved->thread_fn(irq, ved); > + } > + > + return IRQ_HANDLED; > +} > + > +static irqreturn_t dcmipp_irq_callback(int irq, void *arg) > +{ > + struct dcmipp_device *dcmipp = arg; > + struct dcmipp_ent_device *ved; > + irqreturn_t ret = IRQ_HANDLED; > + unsigned int i; > + > + /* Call irq handler of each entities of pipeline */ > + for (i = 0; i < dcmipp->pipe_cfg->num_ents; i++) { > + ved = dcmipp->entity[i]; > + if (ved->handler) > + ved->handler_ret = ved->handler(irq, ved); > + else if (ved->thread_fn) > + ved->handler_ret = IRQ_WAKE_THREAD; > + else > + ved->handler_ret = IRQ_HANDLED; > + if (ved->handler_ret != IRQ_HANDLED) > + ret = ved->handler_ret; > + } > + > + return ret; > +} > + > +static int dcmipp_graph_notify_bound(struct v4l2_async_notifier *notifier, > + struct v4l2_subdev *subdev, > + struct v4l2_async_connection *asd) > +{ > + struct dcmipp_device *dcmipp = notifier_to_dcmipp(notifier); > + unsigned int ret; > + int src_pad; > + struct dcmipp_ent_device *sink; > + struct v4l2_fwnode_endpoint vep = { .bus_type = V4L2_MBUS_PARALLEL }; > + struct fwnode_handle *ep; > + > + dev_dbg(dcmipp->dev, "Subdev \"%s\" bound\n", subdev->name); > + > + /* > + * Link this sub-device to DCMIPP, it could be > + * a parallel camera sensor or a CSI-2 to parallel bridge > + */ > + src_pad = media_entity_get_fwnode_pad(&subdev->entity, > + subdev->fwnode, > + MEDIA_PAD_FL_SOURCE); > + > + /* Get bus characteristics from devicetree */ > + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dcmipp->dev), 0, 0, > + FWNODE_GRAPH_ENDPOINT_NEXT); > + if (!ep) { > + dev_err(dcmipp->dev, "Could not find the endpoint\n"); > + return -ENODEV; > + } > + > + /* Check for parallel bus-type first, then bt656 */ > + ret = v4l2_fwnode_endpoint_parse(ep, &vep); > + if (ret) { > + vep.bus_type = V4L2_MBUS_BT656; > + ret = v4l2_fwnode_endpoint_parse(ep, &vep); > + if (ret) { > + dev_err(dcmipp->dev, "Could not parse the endpoint\n"); > + fwnode_handle_put(ep); > + return ret; > + } > + } > + > + fwnode_handle_put(ep); > + > + if (vep.bus.parallel.bus_width == 0) { > + dev_err(dcmipp->dev, "Invalid parallel interface bus-width\n"); > + return -ENODEV; > + } > + > + /* Only 8 bits bus width supported with BT656 bus */ > + if (vep.bus_type == V4L2_MBUS_BT656 && > + vep.bus.parallel.bus_width != 8) { > + dev_err(dcmipp->dev, "BT656 bus conflicts with %u bits bus width (8 bits required)\n", > + vep.bus.parallel.bus_width); > + return -ENODEV; > + } > + > + /* Parallel input device detected, connect it to parallel subdev */ > + sink = dcmipp->entity[ID_PARALLEL]; > + sink->bus.flags = vep.bus.parallel.flags; > + sink->bus.bus_width = vep.bus.parallel.bus_width; > + sink->bus.data_shift = vep.bus.parallel.data_shift; > + sink->bus_type = vep.bus_type; > + ret = media_create_pad_link(&subdev->entity, src_pad, sink->ent, 0, > + MEDIA_LNK_FL_IMMUTABLE | > + MEDIA_LNK_FL_ENABLED); > + if (ret) { > + dev_err(dcmipp->dev, "Failed to create media pad link with subdev \"%s\"\n", > + subdev->name); > + return ret; > + } > + > + dev_dbg(dcmipp->dev, "DCMIPP is now linked to \"%s\"\n", subdev->name); > + > + return 0; > +} > + > +static const struct v4l2_async_notifier_operations dcmipp_graph_notify_ops = { > + .bound = dcmipp_graph_notify_bound, > + .unbind = dcmipp_graph_notify_unbind, > + .complete = dcmipp_graph_notify_complete, > +}; > + > +static int dcmipp_graph_init(struct dcmipp_device *dcmipp) > +{ > + struct v4l2_async_connection *asd; > + struct fwnode_handle *ep; > + int ret; > + > + ep = fwnode_graph_get_next_endpoint(dev_fwnode(dcmipp->dev), NULL); > + if (!ep) { > + dev_err(dcmipp->dev, "Failed to get next endpoint\n"); > + return -EINVAL; > + } > + > + v4l2_async_nf_init(&dcmipp->notifier, &dcmipp->v4l2_dev); > + > + asd = v4l2_async_nf_add_fwnode_remote(&dcmipp->notifier, ep, > + struct v4l2_async_connection); > + > + fwnode_handle_put(ep); > + > + if (IS_ERR(asd)) { > + dev_err(dcmipp->dev, "Failed to add fwnode remote subdev\n"); > + return PTR_ERR(asd); > + } > + > + dcmipp->notifier.ops = &dcmipp_graph_notify_ops; > + > + ret = v4l2_async_nf_register(&dcmipp->notifier); > + if (ret < 0) { > + dev_err(dcmipp->dev, "Failed to register notifier\n"); > + v4l2_async_nf_cleanup(&dcmipp->notifier); > + return ret; > + } > + > + return 0; > +} > + > +static int dcmipp_probe(struct platform_device *pdev) > +{ > + struct dcmipp_device *dcmipp; > + struct clk *kclk; > + const struct dcmipp_pipeline_config *pipe_cfg; > + int irq; > + int ret; > + > + dcmipp = devm_kzalloc(&pdev->dev, sizeof(*dcmipp), GFP_KERNEL); > + if (!dcmipp) > + return -ENOMEM; > + > + dcmipp->dev = &pdev->dev; > + > + pipe_cfg = of_device_get_match_data(&pdev->dev); > + if (!pipe_cfg) { > + dev_err(&pdev->dev, "Can't get device data\n"); > + return -ENODEV; > + } > + dcmipp->pipe_cfg = pipe_cfg; > + > + platform_set_drvdata(pdev, dcmipp); > + > + /* Get hardware resources from devicetree */ > + dcmipp->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); > + if (IS_ERR(dcmipp->rstc)) > + return dev_err_probe(&pdev->dev, PTR_ERR(dcmipp->rstc), > + "Could not get reset control\n"); > + > + irq = platform_get_irq(pdev, 0); > + if (irq <= 0) { > + if (irq != -EPROBE_DEFER) > + dev_err(&pdev->dev, "Could not get irq\n"); > + return irq ? irq : -ENXIO; > + } > + > + dcmipp->regs = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); > + if (IS_ERR(dcmipp->regs)) { > + dev_err(&pdev->dev, "Could not map registers\n"); > + return PTR_ERR(dcmipp->regs); > + } > + > + ret = devm_request_threaded_irq(&pdev->dev, irq, dcmipp_irq_callback, > + dcmipp_irq_thread, IRQF_ONESHOT, > + dev_name(&pdev->dev), dcmipp); > + if (ret) { > + dev_err(&pdev->dev, "Unable to request irq %d\n", irq); > + return ret; > + } > + > + /* Reset device */ > + ret = reset_control_assert(dcmipp->rstc); > + if (ret) { > + dev_err(&pdev->dev, "Failed to assert the reset line\n"); > + return ret; > + } > + > + usleep_range(3000, 5000); > + > + ret = reset_control_deassert(dcmipp->rstc); > + if (ret) { > + dev_err(&pdev->dev, "Failed to deassert the reset line\n"); > + return ret; > + } > + > + kclk = devm_clk_get(&pdev->dev, NULL); > + if (IS_ERR(kclk)) > + return dev_err_probe(&pdev->dev, PTR_ERR(kclk), > + "Unable to get kclk\n"); > + dcmipp->kclk = kclk; > + > + dcmipp->entity = devm_kcalloc(&pdev->dev, dcmipp->pipe_cfg->num_ents, > + sizeof(*dcmipp->entity), GFP_KERNEL); > + if (!dcmipp->entity) > + return -ENOMEM; > + > + /* Register the v4l2 struct */ > + ret = v4l2_device_register(&pdev->dev, &dcmipp->v4l2_dev); > + if (ret) { > + dev_err(&pdev->dev, > + "v4l2 device register failed (err=%d)\n", ret); > + return ret; > + } > + > + /* Link the media device within the v4l2_device */ > + dcmipp->v4l2_dev.mdev = &dcmipp->mdev; > + > + /* Initialize media device */ > + strscpy(dcmipp->mdev.model, DCMIPP_MDEV_MODEL_NAME, > + sizeof(dcmipp->mdev.model)); > + dcmipp->mdev.dev = &pdev->dev; > + media_device_init(&dcmipp->mdev); > + > + /* Initialize subdevs */ > + ret = dcmipp_create_subdevs(dcmipp); > + if (ret) { > + media_device_cleanup(&dcmipp->mdev); > + v4l2_device_unregister(&dcmipp->v4l2_dev); > + return ret; > + } > + > + pm_runtime_enable(dcmipp->dev); > + > + dev_info(&pdev->dev, "Probe done"); > + > + return 0; > +} > + > +static int dcmipp_remove(struct platform_device *pdev) > +{ > + struct dcmipp_device *dcmipp = platform_get_drvdata(pdev); > + unsigned int i; > + > + pm_runtime_disable(&pdev->dev); > + > + v4l2_async_nf_unregister(&dcmipp->notifier); > + v4l2_async_nf_cleanup(&dcmipp->notifier); > + > + media_device_unregister(&dcmipp->mdev); > + media_device_cleanup(&dcmipp->mdev); > + > + for (i = 0; i < dcmipp->pipe_cfg->num_ents; i++) > + dcmipp->pipe_cfg->ents[i].release(dcmipp->entity[i]); > + > + v4l2_device_unregister(&dcmipp->v4l2_dev); > + > + return 0; > +} > + > +static int dcmipp_runtime_suspend(struct device *dev) > +{ > + struct dcmipp_device *dcmipp = dev_get_drvdata(dev); > + > + clk_disable_unprepare(dcmipp->kclk); > + > + return 0; > +} > + > +static int dcmipp_runtime_resume(struct device *dev) > +{ > + struct dcmipp_device *dcmipp = dev_get_drvdata(dev); > + int ret; > + > + ret = clk_prepare_enable(dcmipp->kclk); > + if (ret) > + dev_err(dev, "%s: Failed to prepare_enable kclk\n", __func__); > + > + return ret; > +} > + > +static int dcmipp_suspend(struct device *dev) > +{ > + /* disable clock */ > + pm_runtime_force_suspend(dev); > + > + /* change pinctrl state */ > + pinctrl_pm_select_sleep_state(dev); > + > + return 0; > +} > + > +static int dcmipp_resume(struct device *dev) > +{ > + /* restore pinctl default state */ > + pinctrl_pm_select_default_state(dev); > + > + /* clock enable */ > + pm_runtime_force_resume(dev); > + > + return 0; > +} > + > +static const struct dev_pm_ops dcmipp_pm_ops = { > + SYSTEM_SLEEP_PM_OPS(dcmipp_suspend, dcmipp_resume) > + RUNTIME_PM_OPS(dcmipp_runtime_suspend, dcmipp_runtime_resume, NULL) > +}; > + > +static struct platform_driver dcmipp_pdrv = { > + .probe = dcmipp_probe, > + .remove = dcmipp_remove, > + .driver = { > + .name = DCMIPP_PDEV_NAME, > + .of_match_table = dcmipp_of_match, > + .pm = pm_ptr(&dcmipp_pm_ops), > + }, > +}; > + > +module_platform_driver(dcmipp_pdrv); > + > +MODULE_AUTHOR("Hugues Fruchet "); > +MODULE_AUTHOR("Alain Volmat "); > +MODULE_DESCRIPTION("STMicroelectronics STM32 Digital Camera Memory Interface with Pixel Processor driver"); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-parallel.c b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-parallel.c > new file mode 100644 > index 000000000000..fbde198a571a > --- /dev/null > +++ b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-parallel.c > @@ -0,0 +1,461 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Driver for STM32 Digital Camera Memory Interface Pixel Processor > + * > + * Copyright (C) STMicroelectronics SA 2022 > + * Authors: Hugues Fruchet > + * Alain Volmat > + * for STMicroelectronics. > + */ > + > +#include > +#include > +#include > + > +#include "dcmipp-common.h" > + > +#define DCMIPP_PRCR 0x104 > +#define DCMIPP_PRCR_FORMAT_SHIFT 16 > +#define DCMIPP_PRCR_FORMAT_YUV422 0x1e > +#define DCMIPP_PRCR_FORMAT_RGB565 0x22 > +#define DCMIPP_PRCR_FORMAT_RAW8 0x2a > +#define DCMIPP_PRCR_FORMAT_G8 0x4a > +#define DCMIPP_PRCR_FORMAT_BYTE_STREAM 0x5a > +#define DCMIPP_PRCR_ESS BIT(4) > +#define DCMIPP_PRCR_PCKPOL BIT(5) > +#define DCMIPP_PRCR_HSPOL BIT(6) > +#define DCMIPP_PRCR_VSPOL BIT(7) > +#define DCMIPP_PRCR_ENABLE BIT(14) > +#define DCMIPP_PRCR_SWAPCYCLES BIT(25) > + > +#define DCMIPP_PRESCR 0x108 > +#define DCMIPP_PRESUR 0x10c > + > +#define IS_SINK(pad) (!(pad)) > +#define IS_SRC(pad) ((pad)) > + > +struct dcmipp_par_pix_map { > + unsigned int code_sink; > + unsigned int code_src; > + u8 prcr_format; > + u8 prcr_swapcycles; > +}; > + > +#define PIXMAP_SINK_SRC_PRCR_SWAP(sink, src, prcr, swap) \ > + { \ > + .code_sink = MEDIA_BUS_FMT_##sink, \ > + .code_src = MEDIA_BUS_FMT_##src, \ > + .prcr_format = DCMIPP_PRCR_FORMAT_##prcr, \ > + .prcr_swapcycles = swap, \ > + } > +static const struct dcmipp_par_pix_map dcmipp_par_pix_map_list[] = { > + /* RGB565 */ > + PIXMAP_SINK_SRC_PRCR_SWAP(RGB565_2X8_LE, RGB565_2X8_LE, RGB565, 1), > + PIXMAP_SINK_SRC_PRCR_SWAP(RGB565_2X8_BE, RGB565_2X8_LE, RGB565, 0), > + /* YUV422 */ > + PIXMAP_SINK_SRC_PRCR_SWAP(YUYV8_2X8, YUYV8_2X8, YUV422, 1), > + PIXMAP_SINK_SRC_PRCR_SWAP(YUYV8_2X8, UYVY8_2X8, YUV422, 0), > + PIXMAP_SINK_SRC_PRCR_SWAP(UYVY8_2X8, UYVY8_2X8, YUV422, 1), > + PIXMAP_SINK_SRC_PRCR_SWAP(UYVY8_2X8, YUYV8_2X8, YUV422, 0), > + PIXMAP_SINK_SRC_PRCR_SWAP(YVYU8_2X8, YVYU8_2X8, YUV422, 1), > + PIXMAP_SINK_SRC_PRCR_SWAP(VYUY8_2X8, VYUY8_2X8, YUV422, 1), > + /* GREY */ > + PIXMAP_SINK_SRC_PRCR_SWAP(Y8_1X8, Y8_1X8, G8, 0), > + /* Raw Bayer */ > + PIXMAP_SINK_SRC_PRCR_SWAP(SBGGR8_1X8, SBGGR8_1X8, RAW8, 0), > + PIXMAP_SINK_SRC_PRCR_SWAP(SGBRG8_1X8, SGBRG8_1X8, RAW8, 0), > + PIXMAP_SINK_SRC_PRCR_SWAP(SGRBG8_1X8, SGRBG8_1X8, RAW8, 0), > + PIXMAP_SINK_SRC_PRCR_SWAP(SRGGB8_1X8, SRGGB8_1X8, RAW8, 0), > + /* JPEG */ > + PIXMAP_SINK_SRC_PRCR_SWAP(JPEG_1X8, JPEG_1X8, BYTE_STREAM, 0), > +}; > + > +/* > + * Search through the pix_map table, skipping two consecutive entry with the > + * same code > + */ > +static inline const struct dcmipp_par_pix_map *dcmipp_par_pix_map_by_index > + (unsigned int index, > + unsigned int pad) > +{ > + unsigned int i = 0; > + u32 prev_code = 0, cur_code; > + > + while (i < ARRAY_SIZE(dcmipp_par_pix_map_list)) { > + if (IS_SRC(pad)) > + cur_code = dcmipp_par_pix_map_list[i].code_src; > + else > + cur_code = dcmipp_par_pix_map_list[i].code_sink; > + > + if (cur_code == prev_code) { > + i++; > + continue; > + } > + prev_code = cur_code; > + > + if (index == 0) > + break; > + i++; > + index--; > + } > + > + if (i >= ARRAY_SIZE(dcmipp_par_pix_map_list)) > + return NULL; > + > + return &dcmipp_par_pix_map_list[i]; > +} > + > +static inline const struct dcmipp_par_pix_map *dcmipp_par_pix_map_by_code > + (u32 code_sink, u32 code_src) > +{ > + unsigned int i; > + > + for (i = 0; i < ARRAY_SIZE(dcmipp_par_pix_map_list); i++) { > + if ((dcmipp_par_pix_map_list[i].code_sink == code_sink && > + dcmipp_par_pix_map_list[i].code_src == code_src) || > + (dcmipp_par_pix_map_list[i].code_sink == code_src && > + dcmipp_par_pix_map_list[i].code_src == code_sink) || > + (dcmipp_par_pix_map_list[i].code_sink == code_sink && > + code_src == 0) || > + (code_sink == 0 && > + dcmipp_par_pix_map_list[i].code_src == code_src)) > + return &dcmipp_par_pix_map_list[i]; > + } > + return NULL; > +} > + > +struct dcmipp_par_device { > + struct dcmipp_ent_device ved; > + struct v4l2_subdev sd; > + struct device *dev; > + void __iomem *regs; > + bool streaming; > +}; > + > +static const struct v4l2_mbus_framefmt fmt_default = { > + .width = DCMIPP_FMT_WIDTH_DEFAULT, > + .height = DCMIPP_FMT_HEIGHT_DEFAULT, > + .code = MEDIA_BUS_FMT_RGB565_2X8_LE, > + .field = V4L2_FIELD_NONE, > + .colorspace = DCMIPP_COLORSPACE_DEFAULT, > + .ycbcr_enc = DCMIPP_YCBCR_ENC_DEFAULT, > + .quantization = DCMIPP_QUANTIZATION_DEFAULT, > + .xfer_func = DCMIPP_XFER_FUNC_DEFAULT, > +}; > + > +static int dcmipp_par_init_cfg(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *sd_state) > +{ > + unsigned int i; > + > + for (i = 0; i < sd->entity.num_pads; i++) { > + struct v4l2_mbus_framefmt *mf; > + > + mf = v4l2_subdev_get_try_format(sd, sd_state, i); > + *mf = fmt_default; > + } > + > + return 0; > +} > + > +static int dcmipp_par_enum_mbus_code(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *sd_state, > + struct v4l2_subdev_mbus_code_enum *code) > +{ > + const struct dcmipp_par_pix_map *vpix = > + dcmipp_par_pix_map_by_index(code->index, code->pad); > + > + if (!vpix) > + return -EINVAL; > + > + code->code = IS_SRC(code->pad) ? vpix->code_src : vpix->code_sink; > + > + return 0; > +} > + > +static int dcmipp_par_enum_frame_size(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *sd_state, > + struct v4l2_subdev_frame_size_enum *fse) > +{ > + const struct dcmipp_par_pix_map *vpix; > + > + if (fse->index) > + return -EINVAL; > + > + /* Only accept code in the pix map table */ > + vpix = dcmipp_par_pix_map_by_code(IS_SINK(fse->pad) ? fse->code : 0, > + IS_SRC(fse->pad) ? fse->code : 0); > + if (!vpix) > + return -EINVAL; > + > + fse->min_width = DCMIPP_FRAME_MIN_WIDTH; > + fse->max_width = DCMIPP_FRAME_MAX_WIDTH; > + fse->min_height = DCMIPP_FRAME_MIN_HEIGHT; > + fse->max_height = DCMIPP_FRAME_MAX_HEIGHT; > + > + return 0; > +} > + > +static int dcmipp_par_get_fmt(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *sd_state, > + struct v4l2_subdev_format *fmt) > +{ > + fmt->format = *v4l2_subdev_get_pad_format(sd, sd_state, fmt->pad); > + > + return 0; > +} v4l2_subdev_get_fmt() does this for you > + > +static void dcmipp_par_adjust_fmt(struct dcmipp_par_device *par, > + struct v4l2_mbus_framefmt *fmt, __u32 pad) > +{ > + const struct dcmipp_par_pix_map *vpix; > + > + /* Only accept code in the pix map table */ > + vpix = dcmipp_par_pix_map_by_code(IS_SINK(pad) ? fmt->code : 0, > + IS_SRC(pad) ? fmt->code : 0); > + if (!vpix) > + fmt->code = fmt_default.code; > + > + /* Exclude JPEG if BT656 bus is selected */ > + if (vpix && vpix->code_sink == MEDIA_BUS_FMT_JPEG_1X8 && > + par->ved.bus_type == V4L2_MBUS_BT656) > + fmt->code = fmt_default.code; > + > + fmt->width = clamp_t(u32, fmt->width, DCMIPP_FRAME_MIN_WIDTH, > + DCMIPP_FRAME_MAX_WIDTH) & ~1; > + fmt->height = clamp_t(u32, fmt->height, DCMIPP_FRAME_MIN_HEIGHT, > + DCMIPP_FRAME_MAX_HEIGHT) & ~1; > + > + if (fmt->field == V4L2_FIELD_ANY || fmt->field == V4L2_FIELD_ALTERNATE) > + fmt->field = fmt_default.field; > + > + dcmipp_colorimetry_clamp(fmt); > +} > + > +static int dcmipp_par_set_fmt(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *sd_state, > + struct v4l2_subdev_format *fmt) > +{ > + struct dcmipp_par_device *par = v4l2_get_subdevdata(sd); > + struct v4l2_mbus_framefmt *mf; > + > + if (par->streaming) > + return -EBUSY; > + > + mf = v4l2_subdev_get_pad_format(sd, sd_state, fmt->pad); > + > + /* Set the new format */ > + dcmipp_par_adjust_fmt(par, &fmt->format, fmt->pad); > + > + dev_dbg(par->dev, "%s: format update: old:%dx%d (0x%x, %d, %d, %d, %d) new:%dx%d (0x%x, %d, %d, %d, %d)\n", > + par->sd.name, > + /* old */ > + mf->width, mf->height, mf->code, > + mf->colorspace, mf->quantization, > + mf->xfer_func, mf->ycbcr_enc, > + /* new */ > + fmt->format.width, fmt->format.height, fmt->format.code, > + fmt->format.colorspace, fmt->format.quantization, > + fmt->format.xfer_func, fmt->format.ycbcr_enc); > + > + *mf = fmt->format; > + > + /* When setting the sink format, report that format on the src pad */ > + if (IS_SINK(fmt->pad)) { > + mf = v4l2_subdev_get_pad_format(sd, sd_state, 1); > + *mf = fmt->format; > + dcmipp_par_adjust_fmt(par, mf, 1); > + } > + > + return 0; > +} > + > +static const struct v4l2_subdev_pad_ops dcmipp_par_pad_ops = { > + .init_cfg = dcmipp_par_init_cfg, > + .enum_mbus_code = dcmipp_par_enum_mbus_code, > + .enum_frame_size = dcmipp_par_enum_frame_size, > + .get_fmt = dcmipp_par_get_fmt, > + .set_fmt = dcmipp_par_set_fmt, > +}; > + > +static int dcmipp_par_configure(struct dcmipp_par_device *par) > +{ > + u32 val = 0; > + const struct dcmipp_par_pix_map *vpix; > + struct v4l2_subdev_state *state; > + struct v4l2_mbus_framefmt *sink_fmt; > + struct v4l2_mbus_framefmt *src_fmt; > + > + /* Set vertical synchronization polarity */ > + if (par->ved.bus.flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) > + val |= DCMIPP_PRCR_VSPOL; > + > + /* Set horizontal synchronization polarity */ > + if (par->ved.bus.flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) > + val |= DCMIPP_PRCR_HSPOL; > + > + /* Set pixel clock polarity */ > + if (par->ved.bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING) > + val |= DCMIPP_PRCR_PCKPOL; > + > + /* > + * BT656 embedded synchronisation bus mode. > + * > + * Default SAV/EAV mode is supported here with default codes > + * SAV=0xff000080 & EAV=0xff00009d. > + * With DCMIPP this means LSC=SAV=0x80 & LEC=EAV=0x9d. > + */ > + if (par->ved.bus_type == V4L2_MBUS_BT656) { > + val |= DCMIPP_PRCR_ESS; > + > + /* Unmask all codes */ > + reg_write(par, DCMIPP_PRESUR, 0xffffffff);/* FEC:LEC:LSC:FSC */ > + > + /* Trig on LSC=0x80 & LEC=0x9d codes, ignore FSC and FEC */ > + reg_write(par, DCMIPP_PRESCR, 0xff9d80ff);/* FEC:LEC:LSC:FSC */ > + } > + > + /* Set format */ > + state = v4l2_subdev_lock_and_get_active_state(&par->sd); > + sink_fmt = v4l2_subdev_get_pad_format(&par->sd, state, 0); > + src_fmt = v4l2_subdev_get_pad_format(&par->sd, state, 1); > + v4l2_subdev_unlock_state(state); > + > + vpix = dcmipp_par_pix_map_by_code(sink_fmt->code, src_fmt->code); > + if (!vpix) { > + dev_err(par->dev, "Invalid sink/src format configuration\n"); > + return -EINVAL; > + } > + > + val |= vpix->prcr_format << DCMIPP_PRCR_FORMAT_SHIFT; > + > + /* swap cycles */ > + if (vpix->prcr_swapcycles) > + val |= DCMIPP_PRCR_SWAPCYCLES; > + > + reg_write(par, DCMIPP_PRCR, val); > + > + return 0; > +} > + > +static int dcmipp_par_s_stream(struct v4l2_subdev *sd, int enable) > +{ > + struct dcmipp_par_device *par = > + container_of(sd, struct dcmipp_par_device, sd); > + struct v4l2_subdev *s_subdev; > + struct media_pad *pad; > + int ret = 0; > + > + /* Get source subdev */ > + pad = media_pad_remote_pad_first(&sd->entity.pads[0]); > + if (!pad || !is_media_entity_v4l2_subdev(pad->entity)) > + return -EINVAL; > + s_subdev = media_entity_to_v4l2_subdev(pad->entity); > + > + if (enable) { > + ret = dcmipp_par_configure(par); > + if (ret) > + return ret; > + > + /* Enable parallel interface */ > + reg_set(par, DCMIPP_PRCR, DCMIPP_PRCR_ENABLE); > + > + ret = v4l2_subdev_call(s_subdev, video, s_stream, enable); > + if (ret < 0) { > + dev_err(par->dev, > + "failed to start source subdev streaming (%d)\n", > + ret); > + return ret; > + } > + } else { > + ret = v4l2_subdev_call(s_subdev, video, s_stream, enable); > + if (ret < 0) { > + dev_err(par->dev, > + "failed to stop source subdev streaming (%d)\n", > + ret); > + return ret; > + } > + > + /* Disable parallel interface */ > + reg_clear(par, DCMIPP_PRCR, DCMIPP_PRCR_ENABLE); > + } > + > + par->streaming = enable; > + > + return ret; > +} > + > +static const struct v4l2_subdev_video_ops dcmipp_par_video_ops = { > + .s_stream = dcmipp_par_s_stream, > +}; > + > +static const struct v4l2_subdev_ops dcmipp_par_ops = { > + .pad = &dcmipp_par_pad_ops, > + .video = &dcmipp_par_video_ops, > +}; > + > +static void dcmipp_par_release(struct v4l2_subdev *sd) > +{ > + struct dcmipp_par_device *par = > + container_of(sd, struct dcmipp_par_device, sd); > + > + kfree(par); > +} > + > +static const struct v4l2_subdev_internal_ops dcmipp_par_int_ops = { > + .release = dcmipp_par_release, > +}; > + > +void dcmipp_par_ent_release(struct dcmipp_ent_device *ved) > +{ > + struct dcmipp_par_device *par = > + container_of(ved, struct dcmipp_par_device, ved); > + > + dcmipp_ent_sd_unregister(ved, &par->sd); > +} > + > +struct dcmipp_ent_device *dcmipp_par_ent_init(struct device *dev, > + const char *entity_name, > + struct v4l2_device *v4l2_dev, > + void __iomem *regs) > +{ > + struct dcmipp_par_device *par; > + struct v4l2_subdev_state *state; > + struct v4l2_mbus_framefmt *sink_fmt; > + struct v4l2_mbus_framefmt *src_fmt; > + int ret; > + > + /* Allocate the par struct */ > + par = kzalloc(sizeof(*par), GFP_KERNEL); > + if (!par) > + return ERR_PTR(-ENOMEM); > + > + par->regs = regs; > + > + /* Initialize ved and sd */ > + ret = dcmipp_ent_sd_register(&par->ved, &par->sd, v4l2_dev, > + entity_name, > + MEDIA_ENT_F_VID_IF_BRIDGE, 2, > + (const unsigned long[2]) { > + MEDIA_PAD_FL_SINK, > + MEDIA_PAD_FL_SOURCE, > + }, > + &dcmipp_par_int_ops, &dcmipp_par_ops, > + NULL, NULL); > + if (ret) { > + kfree(par); > + return ERR_PTR(ret); > + } > + > + par->dev = dev; > + > + /* Initialize the frame format */ > + state = v4l2_subdev_lock_and_get_active_state(&par->sd); > + sink_fmt = v4l2_subdev_get_pad_format(&par->sd, state, 0); > + src_fmt = v4l2_subdev_get_pad_format(&par->sd, state, 0); > + *sink_fmt = fmt_default; > + *src_fmt = fmt_default; > + v4l2_subdev_unlock_state(state); Should already be done by the call to .init_cfg() within the dcmipp_ent_sd_register() path. > + > + return &par->ved; > +}