Received: by 2002:a05:7412:da14:b0:e2:908c:2ebd with SMTP id fe20csp285445rdb; Fri, 6 Oct 2023 03:35:52 -0700 (PDT) X-Google-Smtp-Source: AGHT+IF2LJnXsynyN6XhvVcEfrIi/SpG5Tkdy5xZ71iXpGM6lQoF+pPvDL5Tu1CqxRO+pmlYwJF9 X-Received: by 2002:a05:6358:279c:b0:147:9b6d:f7f6 with SMTP id l28-20020a056358279c00b001479b6df7f6mr6426661rwb.27.1696588552067; Fri, 06 Oct 2023 03:35:52 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1696588552; cv=none; d=google.com; s=arc-20160816; b=Z8jT6X9GMN3EDthUaTuPk5prCaaUEk0P8ZDGwGT3OClb2Y2CkCtjBGNZi8QlocS2nP DX1hgPcueH86eu2O5nLuoOHXMIXqnXYN74TeVMT0+2E6hn3K8qt3P7yEfnaeAuMtgWdv ZItb2l1j9xvrGtTqjTJ21LeuhFBYuOZqf0aLFTQpZ1MBKNoY6am+pdl0weLAWzLGHj5U 3K0INC7GmTZl5zTsuD7GA61g1vXTjZRRw4oq4LMvgHvguHkhfw0xC4FewfSOvEKNf+Mj 6LPV00cd58FWqOLsNBnbvVvGYfKPyTK5srHYujRzJ694xEou0kS+6QzeIwRG/uW9eaO2 uMAw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=On741AyZ3AKo8NQuV3fMiGYE0rRhzhS6sjOJ83S5SHA=; fh=BdoWshtIblK2GXqnam+BYbM5jqNF+x6q1MbdFittGpM=; b=e3yGSmOFjIsbwB++l2n2n8nQfCPoqIOoDG9kKXFsdWMT7L1F3FYfBYWsjM2Up16R6c vQqzqwRxv5Qz4B9cdLQxoBVx+sDPmZUNj189/ecLmQQu46LylAu/2uPJWxQjcNJ3QG7W xjU+VZ0NpdLkRQLToGzBfD3CvEhcceVodVvoacmCud2uuQ4DPnTUuzXqA8FfQwUBt1T7 1ajgptwfxkbaCjl/RlSzhhahkZz8jDSYL35I7xGCYEY57OH0Xp7nurCbbwAPbDol4/jJ iJZ7miI0023Umk01yUT2Kw4KOxJP+b2HaepaJywSDdSjNt07b/UisMioa39fPQpDqbW4 lL0A== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@baylibre-com.20230601.gappssmtp.com header.s=20230601 header.b=gHEoT7Zh; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.31 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from morse.vger.email (morse.vger.email. [23.128.96.31]) by mx.google.com with ESMTPS id z17-20020a631911000000b00577f4d736bbsi3250393pgl.373.2023.10.06.03.35.51 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 06 Oct 2023 03:35:52 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.31 as permitted sender) client-ip=23.128.96.31; Authentication-Results: mx.google.com; dkim=pass header.i=@baylibre-com.20230601.gappssmtp.com header.s=20230601 header.b=gHEoT7Zh; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.31 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by morse.vger.email (Postfix) with ESMTP id 76C4B809C3AA; Fri, 6 Oct 2023 03:35:48 -0700 (PDT) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.10 at morse.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231778AbjJFKfQ (ORCPT + 99 others); Fri, 6 Oct 2023 06:35:16 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56264 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231772AbjJFKfO (ORCPT ); Fri, 6 Oct 2023 06:35:14 -0400 Received: from mail-wm1-x32b.google.com (mail-wm1-x32b.google.com [IPv6:2a00:1450:4864:20::32b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CD3C2E4 for ; Fri, 6 Oct 2023 03:35:08 -0700 (PDT) Received: by mail-wm1-x32b.google.com with SMTP id 5b1f17b1804b1-40535597f01so17561575e9.3 for ; Fri, 06 Oct 2023 03:35:08 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20230601.gappssmtp.com; s=20230601; t=1696588507; x=1697193307; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=On741AyZ3AKo8NQuV3fMiGYE0rRhzhS6sjOJ83S5SHA=; b=gHEoT7ZhBL/tepytlSiWUoBFKt1EaUBF0AK7Ln5I5YYsfQSqe8JATA0/tLyyJXLbNK lKUyGfv8IC/AXk9t+iOy0VCgbbl/tpWqdfWCYrFjLs+SkA4g/YAdZBETQZlukRS+FVgo 9KLszaBj3Bn27WkDIT3mFIgcdaht7DyOBRIXyZYb2RRrI5LYvcPshWKzr1isFMuWtmRK ztdRr0xdxeqbS3eeSntOxOEJgiIi0Jw0gyCM17TeIST5nojE96tCOcc/J9gX5D5MDPME chG8CId6vvec32weRPxhIUywW+CBXJ2KrPvfOhOIhzjF+Ity/Us7CB+4O2lmzs+YdRhe qiAw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1696588507; x=1697193307; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=On741AyZ3AKo8NQuV3fMiGYE0rRhzhS6sjOJ83S5SHA=; b=qYiiHedhVRgUpbu28VdkLiEfqK/ZPNgxHiR5JOjooKf8mfBPXa68cGRXrU+FmdjkHI 0PGI5csuVQJ/eZq/isZTKN/dBMKand2qNzWxcBV696SMzsv3bxO4FdjfegSND25iQHsI ZrYGsl4zWdeswJImSGeWjsLHoeToeyXMzdlEUN1dxQcelkefNVOv0ymCYSF/0NF/SOjC 08AP1sZEm7OgqcwUFHx7TeCUQ7yHsQteHjYP4XoBUOFJjSJE0yS/u/W1NEJsH74uhJVv M45rBd4rkcJG3WSVfsSGMbSMMWtyPipUcdGe60wnwubiIaACnk2xsojwiYoPoNAFgO5p oCvQ== X-Gm-Message-State: AOJu0Yxdzkg8NpFD82oaKhsviThskG1XIlKpwtybdeRxg1VBUr2EgiYk Rrf4D5q0uK90yKLkFaweo5jTAA== X-Received: by 2002:a1c:f710:0:b0:400:ce4f:f184 with SMTP id v16-20020a1cf710000000b00400ce4ff184mr7319582wmh.41.1696588507105; Fri, 06 Oct 2023 03:35:07 -0700 (PDT) Received: from toaster.lan ([2a01:e0a:3c5:5fb1:8f44:72b3:5bcb:6c6b]) by smtp.googlemail.com with ESMTPSA id l9-20020a1c7909000000b00401b242e2e6sm5664963wme.47.2023.10.06.03.35.06 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 06 Oct 2023 03:35:06 -0700 (PDT) From: Jerome Brunet To: Neil Armstrong , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: Jerome Brunet , Kevin Hilman , Da Xue , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org Subject: [PATCH v2 2/2] arm64: dts: amlogic: add libretech cottonwood support Date: Fri, 6 Oct 2023 12:35:00 +0200 Message-Id: <20231006103500.2015183-3-jbrunet@baylibre.com> X-Mailer: git-send-email 2.40.1 In-Reply-To: <20231006103500.2015183-1-jbrunet@baylibre.com> References: <20231006103500.2015183-1-jbrunet@baylibre.com> MIME-Version: 1.0 X-Patchwork-Bot: notify Content-Transfer-Encoding: 8bit X-Spam-Status: No, score=2.8 required=5.0 tests=DKIM_SIGNED,DKIM_VALID, HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI,RCVD_IN_SBL_CSS, SPF_HELO_NONE,SPF_PASS autolearn=no autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on morse.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (morse.vger.email [0.0.0.0]); Fri, 06 Oct 2023 03:35:48 -0700 (PDT) X-Spam-Level: ** Add support for the Libretech cottonwood board family. These 2 boards are based on the same PCB, with an RPi B form factor. The "Alta" board uses an a311d while the "Solitude" variant uses an s905d3. Co-developed-by: Da Xue Signed-off-by: Da Xue Signed-off-by: Jerome Brunet --- arch/arm64/boot/dts/amlogic/Makefile | 2 + .../amlogic/meson-g12b-a311d-libretech-cc.dts | 121 ++++ .../amlogic/meson-libretech-cottonwood.dtsi | 614 ++++++++++++++++++ .../amlogic/meson-sm1-s905d3-libretech-cc.dts | 89 +++ 4 files changed, 826 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts create mode 100644 arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 4ce401d17b63..cc8b34bd583d 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-libretech-cc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-go-ultra.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb @@ -73,6 +74,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m2-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-s905d3-libretech-cc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts new file mode 100644 index 000000000000..65b963d794cd --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 BayLibre, SAS. + * Author: Jerome Brunet + */ + +/dts-v1/; + +#include +#include "meson-g12b-a311d.dtsi" +#include "meson-libretech-cottonwood.dtsi" + +/ { + compatible = "libretech,aml-a311d-cc", "amlogic,a311d", "amlogic,g12b"; + model = "Libre Computer AML-A311D-CC Alta"; + + vddcpu_a: regulator-vddcpu-a { + compatible = "pwm-regulator"; + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1011000>; + regulator-boot-on; + regulator-always-on; + pwm-supply = <&dc_in>; + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + }; + + sound { + model = "LC-ALTA"; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_B IN 0", "TDM_A Capture", + "TDMIN_C IN 0", "TDM_A Capture", + "TDMIN_A IN 3", "TDM_A Loopback", + "TDMIN_B IN 3", "TDM_A Loopback", + "TDMIN_C IN 3", "TDM_A Loopback", + "TDMIN_A IN 1", "TDM_B Capture", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_C IN 1", "TDM_B Capture", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 4", "TDM_B Loopback", + "TDMIN_C IN 4", "TDM_B Loopback", + "TDMIN_A IN 2", "TDM_C Capture", + "TDMIN_B IN 2", "TDM_C Capture", + "TDMIN_C IN 2", "TDM_C Capture", + "TDMIN_A IN 5", "TDM_C Loopback", + "TDMIN_B IN 5", "TDM_C Loopback", + "TDMIN_C IN 5", "TDM_C Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "Lineout", "ACODEC LOLP", + "Lineout", "ACODEC LORP"; + }; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>, <&pwm_b_x7_pins>; + clocks = <&xtal>, <&xtal>; + clock-names = "clkin0", "clkin1"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi new file mode 100644 index 000000000000..ed826f673349 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi @@ -0,0 +1,614 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 BayLibre, SAS. + * Author: Jerome Brunet + */ + +#include +#include +#include +#include +#include +#include +#include + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + spi0 = &spifc; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + dioo2133: audio-amplifier-0 { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio GPIOX_0 GPIO_ACTIVE_HIGH>; + VCC-supply = <&vcc_5v>; + sound-name-prefix = "10U2"; + }; + + /* TOFIX: handle CVBS_DET on SARADC channel 0 */ + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + led-blue { + compatible = "pwm-leds"; + + led { + color = ; + function = LED_FUNCTION_ACTIVITY; + linux,default-trigger = "heartbeat"; + max-brightness = <255>; + pwms = <&pwm_cd 1 1250 0>; + active-low; + }; + }; + + led-green { + compatible = "pwm-leds"; + + led { + color = ; + function = LED_FUNCTION_STATUS; + linux,default-trigger = "default-on"; + max-brightness = <255>; + pwms = <&pwm_ab 1 1250 0>; + active-low; + }; + }; + + led-orange { + compatible = "gpio-leds"; + + led { + color = ; + function = LED_FUNCTION_STANDBY; + gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + panic-indicator; + }; + }; + + dc_in: regulator-dc-in { + compatible = "regulator-fixed"; + regulator-name = "5V_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + flash_1v8: regulator-flash-1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vcc_3v3>; + }; + + vcc_card: regulator-vcc-card { + compatible = "regulator-fixed"; + regulator-name = "VCC_CARD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOX_2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + enable-active-high; + gpio-open-drain; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vddao_3v3>; + + /* FIXME: controlled by TEST_N */ + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&dc_in>; + gpio = <&gpio GPIOH_8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + enable-active-high; + gpio-open-drain; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&dc_in>; + }; + + vddcpu_b: regulator-vddcpu-b { + compatible = "pwm-regulator"; + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1011000>; + regulator-boot-on; + regulator-always-on; + pwm-supply = <&dc_in>; + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vddao_3v3>; + }; + + vddio_c: regulator-vddio_c { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_C"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-settling-time-up-us = <200>; + regulator-settling-time-down-us = <50000>; + vin-supply = <&vddao_3v3>; + gpios = <&gpio GPIOX_4 GPIO_ACTIVE_HIGH>; + states = <3300000 0>, + <1800000 1>; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + audio-widgets = "Line", "Lineout"; + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>, + <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, + <&dioo2133>; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* + * Audio setup: The 40 pins header provides access to 2 TDMs, + * SPDIF In/Out and PDM inputs. + * - TDM A: 2 lanes + * D0: 40/X9 + * D1: 38/X8 + * BCLK: 12/X11 + * FS: 35/X10 + * - TDM B: 4 lanes + * D0: 37/A3 + * D1: 16/A4 + * D2: 18/A5 or 7/AO6 + * D3: 22/A6 or 21/H5 + * BCLK: 29/A1 or 8/AO8 + * FS: 31/A2 or 11/AO7 + * - 2 Master Clocks: + * MCLK0: 15/A0 or 10/AO9 + * MCLK1: 33/X15 + * - SPDIF: + * OUT: 32/A11 + * IN: 21/H5 + * - PDM Input: + * DO: 13/A8 + * D1: 26/A9 + * D2: 22/A6 + * D3: 18/A5 + * DCLK: 36/A7 + * + * TDM C is not usable on the 40 pins connector so it is + * setup for the HDMI 4 lanes i2s. + * + * No pinctrl is enabled by default to preserve the + * genericity of the 40 pins header. Many configurations are + * possible based on the desired use case. Please adjust TDM + * masks, clock setups and pinctrl accordingly. + */ + + dai-link-6 { + sound-dai = <&tdmif_a>; + dai-format = "dsp_a"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_A>; + }; + }; + + dai-link-7 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-rx-mask-1 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_B>; + }; + }; + + dai-link-8 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_C>; + }; + }; + + dai-link-9 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + + dai-link-10 { + sound-dai = <&toacodec TOACODEC_OUT>; + + codec { + sound-dai = <&acodec>; + }; + }; + }; +}; + +&acodec { + status = "okay"; + AVDD-supply = <&vddio_ao18>; +}; + +&arb { + status = "okay"; +}; + +&cecb_AO { + status = "okay"; + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&dwc3 { + #address-cells = <1>; + #size-cells = <0>; + + hub: hub@1 { + compatible = "usb5e3,626"; + reg = <1>; + reset-gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&vcc_5v>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>, <ð_phy_irq_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&periphs_pinctrl { + spi_cs_disable_pins: spi-cs-disable { + mux { + groups = "BOOT_14"; + function = "gpio_periphs"; + bias-disable; + output-high; + }; + }; + + eth_phy_irq_pins: eth-phy-irq { + mux { + groups = "GPIOZ_14"; + function = "gpio_periphs"; + bias-pull-up; + output-disable; + }; + }; +}; + +&pwm_AO_cd { + status = "okay"; + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_b_x7_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; +}; + +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_d_x3_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + max-frequency = <200000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vcc_card>; + vqmmc-supply = <&vddio_c>; +}; + +/* + * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS + * and eMMC Data 4 to 7 pins. + * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0, + * and change bus-width to 4 then spifc can be enabled. + */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>, + <&spi_cs_disable_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&spifc { + status = "disabled"; + pinctrl-0 = <&nor_pins>; + pinctrl-names = "default"; + cs-gpios = <&gpio BOOT_14 GPIO_ACTIVE_LOW>; + + w25lq128d: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <80000000>; + }; +}; + +&tdmif_a { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmif_c { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tdmout_c { + status = "okay"; +}; + +&toacodec { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb2_phy1 { + phy-supply = <&dc_in>; +}; + +&usb3_pcie_phy { + phy-supply = <&vcc_5v>; +}; + +&usb { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts new file mode 100644 index 000000000000..537370db360f --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 BayLibre, SAS. + * Author: Jerome Brunet + */ + +/dts-v1/; + +#include +#include "meson-sm1.dtsi" +#include "meson-libretech-cottonwood.dtsi" + +/ { + compatible = "libretech,aml-s905d3-cc", "amlogic,sm1"; + model = "Libre Computer AML-S905D3-CC Solitude"; + + sound { + model = "LC-SOLITUDE"; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_B IN 0", "TDM_A Capture", + "TDMIN_C IN 0", "TDM_A Capture", + "TDMIN_A IN 13", "TDM_A Loopback", + "TDMIN_B IN 13", "TDM_A Loopback", + "TDMIN_C IN 13", "TDM_A Loopback", + "TDMIN_A IN 1", "TDM_B Capture", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_C IN 1", "TDM_B Capture", + "TDMIN_A IN 14", "TDM_B Loopback", + "TDMIN_B IN 14", "TDM_B Loopback", + "TDMIN_C IN 14", "TDM_B Loopback", + "TDMIN_A IN 2", "TDM_C Capture", + "TDMIN_B IN 2", "TDM_C Capture", + "TDMIN_C IN 2", "TDM_C Capture", + "TDMIN_A IN 15", "TDM_C Loopback", + "TDMIN_B IN 15", "TDM_C Loopback", + "TDMIN_C IN 15", "TDM_C Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "Lineout", "ACODEC LOLP", + "Lineout", "ACODEC LORP"; + }; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; -- 2.40.1