Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:8 as permitted sender) client-ip=2620:137:e000::3:8;
Message-ID: <9b7744bf-d42c-4922-85e8-ca4777f313a7@linaro.org>
Date:   Fri, 6 Oct 2023 23:15:40 +0200
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH RFC 2/2] regulator: qcom_smd: Disable unused regulators
Content-Language: en-US
To:     Stephan Gerhold <stephan.gerhold@kernkonzept.com>,
        Mark Brown <broonie@kernel.org>
Cc:     Liam Girdwood <lgirdwood@gmail.com>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        Stephan Gerhold <stephan@gerhold.net>
References: <20231004-reg-smd-unused-v1-0-5d682493d555@kernkonzept.com>
 <20231004-reg-smd-unused-v1-2-5d682493d555@kernkonzept.com>
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
Autocrypt: addr=konrad.dybcio@linaro.org; keydata=
 xsFNBF9ALYUBEADWAhxdTBWrwAgDQQzc1O/bJ5O7b6cXYxwbBd9xKP7MICh5YA0DcCjJSOum
 BB/OmIWU6X+LZW6P88ZmHe+KeyABLMP5s1tJNK1j4ntT7mECcWZDzafPWF4F6m4WJOG27kTJ
 HGWdmtO+RvadOVi6CoUDqALsmfS3MUG5Pj2Ne9+0jRg4hEnB92AyF9rW2G3qisFcwPgvatt7
 TXD5E38mLyOPOUyXNj9XpDbt1hNwKQfiidmPh5e7VNAWRnW1iCMMoKqzM1Anzq7e5Afyeifz
 zRcQPLaqrPjnKqZGL2BKQSZDh6NkI5ZLRhhHQf61fkWcUpTp1oDC6jWVfT7hwRVIQLrrNj9G
 MpPzrlN4YuAqKeIer1FMt8cq64ifgTzxHzXsMcUdclzq2LTk2RXaPl6Jg/IXWqUClJHbamSk
 t1bfif3SnmhA6TiNvEpDKPiT3IDs42THU6ygslrBxyROQPWLI9IL1y8S6RtEh8H+NZQWZNzm
 UQ3imZirlPjxZtvz1BtnnBWS06e7x/UEAguj7VHCuymVgpl2Za17d1jj81YN5Rp5L9GXxkV1
 aUEwONM3eCI3qcYm5JNc5X+JthZOWsbIPSC1Rhxz3JmWIwP1udr5E3oNRe9u2LIEq+wH/toH
 kpPDhTeMkvt4KfE5m5ercid9+ZXAqoaYLUL4HCEw+HW0DXcKDwARAQABzShLb25yYWQgRHli
 Y2lvIDxrb25yYWQuZHliY2lvQGxpbmFyby5vcmc+wsGOBBMBCAA4FiEEU24if9oCL2zdAAQV
 R4cBcg5dfFgFAmQ5bqwCGwMFCwkIBwIGFQoJCAsCBBYCAwECHgECF4AACgkQR4cBcg5dfFjO
 BQ//YQV6fkbqQCceYebGg6TiisWCy8LG77zV7DB0VMIWJv7Km7Sz0QQrHQVzhEr3trNenZrf
 yy+o2tQOF2biICzbLM8oyQPY8B///KJTWI2khoB8IJSJq3kNG68NjPg2vkP6CMltC/X3ohAo
 xL2UgwN5vj74QnlNneOjc0vGbtA7zURNhTz5P/YuTudCqcAbxJkbqZM4WymjQhe0XgwHLkiH
 5LHSZ31MRKp/+4Kqs4DTXMctc7vFhtUdmatAExDKw8oEz5NbskKbW+qHjW1XUcUIrxRr667V
 GWH6MkVceT9ZBrtLoSzMLYaQXvi3sSAup0qiJiBYszc/VOu3RbIpNLRcXN3KYuxdQAptacTE
 mA+5+4Y4DfC3rUSun+hWLDeac9z9jjHm5rE998OqZnOU9aztbd6zQG5VL6EKgsVXAZD4D3RP
 x1NaAjdA3MD06eyvbOWiA5NSzIcC8UIQvgx09xm7dThCuQYJR4Yxjd+9JPJHI6apzNZpDGvQ
 BBZzvwxV6L1CojUEpnilmMG1ZOTstktWpNzw3G2Gis0XihDUef0MWVsQYJAl0wfiv/0By+XK
 mm2zRR+l/dnzxnlbgJ5pO0imC2w0TVxLkAp0eo0LHw619finad2u6UPQAkZ4oj++iIGrJkt5
 Lkn2XgB+IW8ESflz6nDY3b5KQRF8Z6XLP0+IEdLOOARkOW7yEgorBgEEAZdVAQUBAQdAwmUx
 xrbSCx2ksDxz7rFFGX1KmTkdRtcgC6F3NfuNYkYDAQgHwsF2BBgBCAAgFiEEU24if9oCL2zd
 AAQVR4cBcg5dfFgFAmQ5bvICGwwACgkQR4cBcg5dfFju1Q//Xta1ShwL0MLSC1KL1lXGXeRM
 8arzfyiB5wJ9tb9U/nZvhhdfilEDLe0jKJY0RJErbdRHsalwQCrtq/1ewQpMpsRxXzAjgfRN
 jc4tgxRWmI+aVTzSRpywNahzZBT695hMz81cVZJoZzaV0KaMTlSnBkrviPz1nIGHYCHJxF9r
 cIu0GSIyUjZ/7xslxdvjpLth16H27JCWDzDqIQMtg61063gNyEyWgt1qRSaK14JIH/DoYRfn
 jfFQSC8bffFjat7BQGFz4ZpRavkMUFuDirn5Tf28oc5ebe2cIHp4/kajTx/7JOxWZ80U70mA
 cBgEeYSrYYnX+UJsSxpzLc/0sT1eRJDEhI4XIQM4ClIzpsCIN5HnVF76UQXh3a9zpwh3dk8i
 bhN/URmCOTH+LHNJYN/MxY8wuukq877DWB7k86pBs5IDLAXmW8v3gIDWyIcgYqb2v8QO2Mqx
 YMqL7UZxVLul4/JbllsQB8F/fNI8AfttmAQL9cwo6C8yDTXKdho920W4WUR9k8NT/OBqWSyk
 bGqMHex48FVZhexNPYOd58EY9/7mL5u0sJmo+jTeb4JBgIbFPJCFyng4HwbniWgQJZ1WqaUC
 nas9J77uICis2WH7N8Bs9jy0wQYezNzqS+FxoNXmDQg2jetX8en4bO2Di7Pmx0jXA4TOb9TM
 izWDgYvmBE8=
In-Reply-To: <20231004-reg-smd-unused-v1-2-5d682493d555@kernkonzept.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 4.10.2023 16:17, Stephan Gerhold wrote:
> The RPM firmware on Qualcomm platforms does not provide a way to check
> if a regulator is on during boot using the SMD interface. If the
> regulators are already on during boot and Linux does not make use of
> them they will currently stay enabled forever. The regulator core does
> not know these regulators are on and cannot clean them up together with
> the other unused regulators.
> 
> Fix this by setting the initial enable state to -EINVAL similar to
> qcom-rpmh-regulator.c. The regulator core will then also explicitly
> disable all unused regulators with unknown status.
> 
> Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
> ---
> NOTE: This has a slight potential of breaking boards that rely on having
> unused regulators permanently enabled (without regulator-always-on).
> However, this is always a mistake in the device tree so it's probably
> better to risk some breakage now, add the missing regulators and avoid
> this problem for all future boards.
> ---
>  drivers/regulator/qcom_smd-regulator.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
> index f53ada076252..0bbfba2e17ff 100644
> --- a/drivers/regulator/qcom_smd-regulator.c
> +++ b/drivers/regulator/qcom_smd-regulator.c
> @@ -53,14 +53,14 @@ static int rpm_reg_write_active(struct qcom_rpm_reg *vreg)
>  		reqlen++;
>  	}
>  
> -	if (vreg->uv_updated && vreg->is_enabled) {
> +	if (vreg->uv_updated && vreg->is_enabled > 0) {
At a quick glance, are there any states for this value, other
than 0 and 1? This is not the regulator_ops->is_enabled, but
qcom_rpm_reg->is_enabled.

Konrad