Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.38 as permitted sender) client-ip=23.128.96.38;
MIME-Version: 1.0
References: <20231006103959.197485-1-claudiu.beznea.uj@bp.renesas.com> <20231006103959.197485-4-claudiu.beznea.uj@bp.renesas.com>
In-Reply-To: <20231006103959.197485-4-claudiu.beznea.uj@bp.renesas.com>
From:   Geert Uytterhoeven <geert@linux-m68k.org>
Date:   Mon, 9 Oct 2023 13:53:58 +0200
Message-ID: <CAMuHMdUc8jV_mf7Q1mXQ8XKmZfD0ZyCJQ6Pp9tTF1YkDjyRvhw@mail.gmail.com>
Subject: Re: [PATCH v3 3/4] clk: renesas: rzg2l: add a divider clock for RZ/G3S
To:     Claudiu <claudiu.beznea@tuxon.dev>
Cc:     mturquette@baylibre.com, sboyd@kernel.org,
        gregkh@linuxfoundation.org, jirislaby@kernel.org,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        conor+dt@kernel.org, magnus.damm@gmail.com,
        linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org,
        linux-serial@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 8BIT
Precedence: bulk

On Fri, Oct 6, 2023 at 12:40 PM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Add a divider clock driver for RZ/G3S. This will be used in RZ/G3S
> by SDHI, SPI, OCTA, I, I2, I3, P0, P1, P2, P3 core clocks.
> The divider has some limitation for SDHI, OCTA and SPI clocks:
> - SDHI div cannot be 1 if parent rate is 800MHz
> - OCTA, SPI div cannot be 1 if parent rate is 400MHz
> For these clocks a notifier could be registered from platform specific
> clock driver and proper actions are taken before clock rate is changed,
> if needed.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> ---
>
> Changes in v3:
> - adjusted commit message to specifies that divider has limitations also
>   for SPI clock
> - s/SD div/SDHI div in commit message
> - return proper code from notifier
> - used CPG_WEN_BIT where possible notifier and set explicitily 1 in div
>   notifier
> - removed rzg3s_div_clk_is_rate_valid() and all its occurencies: it was
>   not needed in rzg3s_div_clk_set_rate()
> - .round_rate was replaced by .determine_rate for the introduced divider
> - initialized max variable in rzg3s_cpg_div_clk_register()
> - introduced struct div_hw_data::max_rate to specify from the SoC-specific
>   drivers the maximum available rate for divider that will be requested
>   when a rate higher than this one is requested
> - removed bitmask variable from notifier and rzg3s_div_clk_set_rate()
> - added max_rate to DEF_G3S_DIV() macro
> - tested on RZ/G2L and RZ/G3S

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-clk-for-v6.7.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds