Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) client-ip=2620:137:e000::3:2;
Message-ID: <c69dc6e0-30a8-460c-a718-99874b543534@linaro.org>
Date:   Mon, 9 Oct 2023 23:12:34 +0200
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH 5/7] arm64: dts: qcom: sc7180: Add UFS nodes
Content-Language: en-US
To:     David Wronek <davidwronek@gmail.com>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Vinod Koul <vkoul@kernel.org>,
        Kishon Vijay Abraham I <kishon@kernel.org>,
        Manivannan Sadhasivam <mani@kernel.org>,
        Alim Akhtar <alim.akhtar@samsung.com>,
        Avri Altman <avri.altman@wdc.com>,
        Bart Van Assche <bvanassche@acm.org>,
        Joe Mason <buddyjojo06@outlook.com>
Cc:     cros-qcom-dts-watchers@chromium.org, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-phy@lists.infradead.org, linux-scsi@vger.kernel.org,
        hexdump0815@googlemail.com, ~postmarketos/upstreaming@lists.sr.ht,
        phone-devel@vger.kernel.org
References: <20231007140053.1731245-1-davidwronek@gmail.com>
 <20231007140053.1731245-6-davidwronek@gmail.com>
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
In-Reply-To: <20231007140053.1731245-6-davidwronek@gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 10/7/23 15:58, David Wronek wrote:
> Add the UFS and QMP PHY nodes for the Qualcomm SC7180 SoC.
> 
> Signed-off-by: David Wronek <davidwronek@gmail.com>
> ---
>   arch/arm64/boot/dts/qcom/sc7180.dtsi | 70 ++++++++++++++++++++++++++++
>   1 file changed, 70 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 11f353d416b4..9f18be4fd61a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -1532,6 +1532,76 @@ mmss_noc: interconnect@1740000 {
>   			qcom,bcm-voters = <&apps_bcm_voter>;
>   		};
>   
> +		ufs_mem_hc: ufshc@1d84000 {
> +			compatible = "qcom,sc7180-ufshc", "qcom,ufshc",
> +				     "jedec,ufs-2.0";
> +			reg = <0 0x01d84000 0 0x3000>,
> +			      <0 0x01d90000 0 0x8000>;
> +			reg-names = "std", "ice";
Recently the ICE was separated into its own node

> +			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> +			phys = <&ufs_mem_phy>;
> +			phy-names = "ufsphy";
> +			lanes-per-direction = <1>;
> +			power-domains = <&gcc UFS_PHY_GDSC>;
> +			#reset-cells = <1>;
> +			resets = <&gcc GCC_UFS_PHY_BCR>;
> +			reset-names = "rst";
> +
> +			iommus = <&apps_smmu 0xa0 0x0>;
> +
> +			clock-names =
> +				"core_clk",
Remove the newline after the =, here and below

> +				"bus_aggr_clk",
> +				"iface_clk",
> +				"core_clk_unipro",
> +				"ref_clk",
> +				"tx_lane0_sync_clk",
> +				"rx_lane0_sync_clk",
> +				"ice_core_clk";
> +			clocks =
> +				<&gcc GCC_UFS_PHY_AXI_CLK>,
> +				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> +				<&gcc GCC_UFS_PHY_AHB_CLK>,
> +				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> +				<&rpmhcc RPMH_CXO_CLK>,
> +				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> +				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> +				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
> +			freq-table-hz =
> +				<50000000 200000000>,
> +				<0 0>,
> +				<0 0>,
> +				<37500000 150000000>,
> +				<0 0>,
> +				<0 0>,
> +				<0 0>,
> +				<0 300000000>;
> +
> +			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
Please make the <s align and use QCOM_ICC_TAG_ALWAYS from 
include/dt-bindings/interconnect/qcom,icc.h like in sa8775p.dtsi
> +			interconnect-names = "ufs-ddr", "cpu-ufs";
> +
> +			status = "disabled";
> +		};
> +
> +		ufs_mem_phy: phy@1d87000 {
> +			compatible = "qcom,sc7180-qmp-ufs-phy";
> +			reg = <0 0x01d87000 0 0x1000>;
> +
> +			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
> +				<&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
Please align the <s

Konrad