Received: by 2002:a05:7412:da14:b0:e2:908c:2ebd with SMTP id fe20csp2321783rdb; Mon, 9 Oct 2023 23:31:19 -0700 (PDT) X-Google-Smtp-Source: AGHT+IGJF5nR+eju4S0glptAQvpHW68nqxtnYRGycgemm+GkaB/qsSJlU6ro/oIOgcnwcaBFc/4l X-Received: by 2002:a05:6a21:61c:b0:15d:9ee7:1811 with SMTP id ll28-20020a056a21061c00b0015d9ee71811mr13773833pzb.36.1696919479181; Mon, 09 Oct 2023 23:31:19 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1696919479; cv=none; d=google.com; s=arc-20160816; b=HvqcSlMeKErn0MaS4V9aKxG2znbqvvqmwySmQVpDdD3O0dbQI73VKuxiOLk+r7laqX 3ohxI7G2+TY/ViLtbpfOZmxA7dHCpfnfbnSHhcWoFgURa6Eb/KF3yvop+r2qMLT2ANgV cgzbzAPex830yf5tyQWKM0/3tqFDflo8pHKRoeER+T8FBDkRDQtxajWg6KDct4z7JPvg 9KJS3KxR3OYFkziMFmEcEkixiEZ8WU83zE8Nt7WZ6kFGDOmx7nlPKq6fkiJ6h98EBg+u mpNRsuHxE1sq12Ey2D+4pOE4LNOuO4M6k6aMffPmECWY4Vb/XkagkrO8GwNncP5ZERgF 7BSw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from; bh=s4Du2g3tvqcYoEQdhq656JloQBgOlXS382Eu38b/xyI=; fh=oBbb0mPe52rzzTIwtg9Xc2rZ0LejYIA322XCn8vhPVE=; b=yaHOF/nD69ueSWTlwygod2+runMATiv3NlLHVbpBWqvvTHXOduSx34qlecACrSTHhW jc9FgY1bxDG3JEPIIBwWU24vIZGphchtob3tMDEaTog2ctUJgS/iI86qZkqtn73oNBcH dnb380awKAT58LdZtqxOY0jrD9gEZTg9nJZaoOIY5ifEspxvEagkGyRnkhTCuqGE9Dqb 5EgdmAa3wcNMxD+dRmGla3OECrJXhAUhR+To/29aIUgBJfU0ewCCdii6Mc+Lf/EPw1hm qhyDF5jVtiu37soy6VRTH9KIjRqWXNv2wF3NEZO3yNmaKx+bQaGcXVkjTSIU1ZNjWo0R tddQ== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.32 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=amlogic.com Return-Path: Received: from agentk.vger.email (agentk.vger.email. [23.128.96.32]) by mx.google.com with ESMTPS id fb40-20020a056a002da800b0068ff3927553si8966165pfb.35.2023.10.09.23.31.18 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 09 Oct 2023 23:31:19 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.32 as permitted sender) client-ip=23.128.96.32; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.32 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=amlogic.com Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by agentk.vger.email (Postfix) with ESMTP id DA7898026AC5; Mon, 9 Oct 2023 23:31:04 -0700 (PDT) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.10 at agentk.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1442298AbjJJGah (ORCPT + 99 others); Tue, 10 Oct 2023 02:30:37 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37310 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1442242AbjJJGac (ORCPT ); Tue, 10 Oct 2023 02:30:32 -0400 Received: from mail-sh.amlogic.com (mail-sh.amlogic.com [58.32.228.43]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 78ED091; Mon, 9 Oct 2023 23:29:41 -0700 (PDT) Received: from droid01-cd.amlogic.com (10.98.11.200) by mail-sh.amlogic.com (10.18.11.5) with Microsoft SMTP Server id 15.1.2507.13; Tue, 10 Oct 2023 14:29:39 +0800 From: Xianwei Zhao To: , , , , CC: Neil Armstrong , Jerome Brunet , Michael Turquette , "Stephen Boyd" , Rob Herring , "Krzysztof Kozlowski" , Kevin Hilman , Martin Blumenstingl , Chuan Liu , Xianwei Zhao Subject: [PATCH V2 3/4] clk: meson: c3: add support for the C3 SoC PLL clock Date: Tue, 10 Oct 2023 14:29:16 +0800 Message-ID: <20231010062917.3624223-4-xianwei.zhao@amlogic.com> X-Mailer: git-send-email 2.37.1 In-Reply-To: <20231010062917.3624223-1-xianwei.zhao@amlogic.com> References: <20231010062917.3624223-1-xianwei.zhao@amlogic.com> MIME-Version: 1.0 Content-Transfer-Encoding: 7BIT Content-Type: text/plain; charset=US-ASCII X-Originating-IP: [10.98.11.200] X-Spam-Status: No, score=2.8 required=5.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,RCVD_IN_SBL_CSS,SPF_HELO_NONE,SPF_PASS autolearn=no autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on agentk.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (agentk.vger.email [0.0.0.0]); Mon, 09 Oct 2023 23:31:05 -0700 (PDT) X-Spam-Level: ** Add the C3 PLL clock controller driver for the Amlogic C3 SoC family. Signed-off-by: Xianwei Zhao --- V1 -> V2: Delete macro definition. --- drivers/clk/meson/Kconfig | 12 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/c3-pll.c | 808 +++++++++++++++++++++++++++++++++++++ drivers/clk/meson/c3-pll.h | 35 ++ 4 files changed, 856 insertions(+) create mode 100644 drivers/clk/meson/c3-pll.c create mode 100644 drivers/clk/meson/c3-pll.h diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index c5303e4c1604..76be4bbd2afb 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -128,6 +128,18 @@ config COMMON_CLK_A1_PERIPHERALS device, A1 SoC Family. Say Y if you want A1 Peripherals clock controller to work. +config COMMON_CLK_C3_PLL + tristate "Amlogic C3 PLL clock controller" + default y + select COMMON_CLK_MESON_REGMAP + select COMMON_CLK_MESON_PLL + select COMMON_CLK_MESON_CLKC_UTILS + help + Support for the PLL clock controller on Amlogic C302X and C308L devices, + AKA c3. Amlogic C302X and C308L devices include AW402, AW409 and AW419. + Say Y if you want the board to work, because PLLs are the parent of most + peripherals. + config COMMON_CLK_G12A tristate "G12 and SM1 SoC clock controllers support" depends on ARM64 diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 9ee4b954c896..4420af628b31 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o +obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o diff --git a/drivers/clk/meson/c3-pll.c b/drivers/clk/meson/c3-pll.c new file mode 100644 index 000000000000..97619bc7ab79 --- /dev/null +++ b/drivers/clk/meson/c3-pll.c @@ -0,0 +1,808 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Amlogic C3 PLL Controller Driver + * + * Copyright (c) 2023 Amlogic, inc. + * Author: Chuan Liu + */ + +#include +#include +#include +#include +#include "clk-regmap.h" +#include "clk-pll.h" +#include "c3-pll.h" +#include "meson-clkc-utils.h" +#include + +static const struct clk_parent_data pll_dco_parent = { + .fw_name = "pll_in", +}; + +static const struct clk_parent_data mclk_pll_dco_parent = { + .fw_name = "mclk_pll_in", +}; + +static struct clk_regmap fixed_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 16, + .width = 5, + }, + .l = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 29, + .width = 1, + }, + }, + .hw.init = &(struct clk_init_data){ + .name = "fixed_pll_dco", + .ops = &meson_clk_pll_ro_ops, + .parent_data = &pll_dco_parent, + .num_parents = 1, + }, +}; + +static struct clk_regmap fixed_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .shift = 12, + .width = 3, + .flags = CLK_DIVIDER_POWER_OF_TWO, + }, + .hw.init = &(struct clk_init_data){ + .name = "fixed_pll", + .ops = &clk_regmap_divider_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll_dco.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor fclk_div40_div = { + .mult = 1, + .div = 40, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div40_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div40 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL4, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "fclk_div40", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div40_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor fclk_div2_div = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL4, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "fclk_div2", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div2_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor fclk_div2p5_div = { + .mult = 2, + .div = 5, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2p5_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div2p5 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL4, + .bit_idx = 4, + }, + .hw.init = &(struct clk_init_data) { + .name = "fclk_div2p5", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div2p5_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor fclk_div3_div = { + .mult = 1, + .div = 3, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div3 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL4, + .bit_idx = 20, + }, + .hw.init = &(struct clk_init_data) { + .name = "fclk_div3", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div3_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor fclk_div4_div = { + .mult = 1, + .div = 4, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div4_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div4 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL4, + .bit_idx = 21, + }, + .hw.init = &(struct clk_init_data) { + .name = "fclk_div4", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div4_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor fclk_div5_div = { + .mult = 1, + .div = 5, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div5 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL4, + .bit_idx = 22, + }, + .hw.init = &(struct clk_init_data) { + .name = "fclk_div5", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div5_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor fclk_div7_div = { + .mult = 1, + .div = 7, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div7 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL4, + .bit_idx = 23, + }, + .hw.init = &(struct clk_init_data) { + .name = "fclk_div7", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div7_div.hw + }, + .num_parents = 1, + }, +}; + +static const struct reg_sequence c3_gp0_init_regs[] = { + { .reg = ANACTRL_GP0PLL_CTRL1, .def = 0x0 }, + { .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x0 }, + { .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x48681c00 }, + { .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x88770290 }, + { .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x3927200a }, + { .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x56540000, .delay_us = 10 }, + { .reg = ANACTRL_GP0PLL_CTRL0, .def = 0x080304fa }, + { .reg = ANACTRL_GP0PLL_CTRL0, .def = 0x380304fa, .delay_us = 10 }, + { .reg = ANACTRL_GP0PLL_CTRL0, .def = 0X180304fa } +}; + +static const struct pll_params_table c3_gp0_pll_params_table[] = { + PLL_PARAMS(150, 1), /* DCO = 3600M */ + PLL_PARAMS(130, 1), /* DCO = 3120M */ + PLL_PARAMS(192, 1), /* DCO = 4608M */ + PLL_PARAMS(125, 1), /* DCO = 3000M */ + { /* sentinel */ } +}; + +/* The maximum frequency divider supports is 32, not 128(2^7) */ +static const struct clk_div_table c3_gp0_pll_od_table[] = { + { 0, 1 }, + { 1, 2 }, + { 2, 4 }, + { 3, 8 }, + { 4, 16 }, + { 5, 32 }, + { /* sentinel */ } +}; + +static struct clk_regmap gp0_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 0, + .width = 9, + }, + .frac = { + .reg_off = ANACTRL_GP0PLL_CTRL1, + .shift = 0, + .width = 19, + }, + .n = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 10, + .width = 5, + }, + .l = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 29, + .width = 1, + }, + .table = c3_gp0_pll_params_table, + .init_regs = c3_gp0_init_regs, + .init_count = ARRAY_SIZE(c3_gp0_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "gp0_pll_dco", + .ops = &meson_clk_pll_ops, + .parent_data = &pll_dco_parent, + .num_parents = 1, + }, +}; + +static struct clk_regmap gp0_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_GP0PLL_CTRL0, + .shift = 16, + .width = 3, + .table = c3_gp0_pll_od_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "gp0_pll", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &gp0_pll_dco.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct reg_sequence c3_hifi_init_regs[] = { + { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x08010496 }, + { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x38010496 }, + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x0000ce40 }, + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00000000 }, + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a285c00 }, + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 }, + { .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x3927200a }, + { .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x56540000, .delay_us = 50 }, + { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x18010496, .delay_us = 20 }, +}; + +static const struct pll_params_table c3_hifi_pll_params_table[] = { + PLL_PARAMS(150, 1), /* DCO = 3600M */ + PLL_PARAMS(130, 1), /* DCO = 3120M */ + PLL_PARAMS(192, 1), /* DCO = 4608M */ + PLL_PARAMS(125, 1), /* DCO = 3000M */ + { /* sentinel */ } +}; + +static struct clk_regmap hifi_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .frac = { + .reg_off = ANACTRL_HIFIPLL_CTRL1, + .shift = 0, + .width = 19, + }, + .n = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .l = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 29, + .width = 1, + }, + .table = c3_hifi_pll_params_table, + .init_regs = c3_hifi_init_regs, + .init_count = ARRAY_SIZE(c3_hifi_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "hifi_pll_dco", + .ops = &meson_clk_pll_ops, + .parent_data = &pll_dco_parent, + .num_parents = 1, + }, +}; + +static struct clk_regmap hifi_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_HIFIPLL_CTRL0, + .shift = 16, + .width = 2, + .flags = CLK_DIVIDER_POWER_OF_TWO, + }, + .hw.init = &(struct clk_init_data){ + .name = "hifi_pll", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &hifi_pll_dco.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct reg_sequence c3_mclk_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL0, .def = 0x20011063 }, + { .reg = ANACTRL_MPLL_CTRL0, .def = 0x30011063 }, + { .reg = ANACTRL_MPLL_CTRL1, .def = 0x1420500f }, + { .reg = ANACTRL_MPLL_CTRL2, .def = 0x00023041 }, + { .reg = ANACTRL_MPLL_CTRL3, .def = 0x18180000 }, + { .reg = ANACTRL_MPLL_CTRL0, .def = 0x10011063 }, + { .reg = ANACTRL_MPLL_CTRL2, .def = 0x00023001 } +}; + +static const struct pll_params_table c3_mclk_pll_params_table[] = { + PLL_PARAMS(99, 1), /* VCO = 2376M */ + { /* sentinel */ } +}; + +static const struct clk_div_table c3_mpll_od_table[] = { + { 0, 1 }, + { 1, 2 }, + { 2, 4 }, + { 3, 8 }, + { 4, 16 }, + { /* sentinel */ } +}; + +static struct clk_regmap mclk_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_MPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_MPLL_CTRL0, + .shift = 0, + .width = 9, + }, + .n = { + .reg_off = ANACTRL_MPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .l = { + .reg_off = ANACTRL_MPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_MPLL_CTRL0, + .shift = 29, + .width = 1, + }, + .table = c3_mclk_pll_params_table, + .init_regs = c3_mclk_init_regs, + .init_count = ARRAY_SIZE(c3_mclk_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mclk_pll_dco", + .ops = &meson_clk_pll_ops, + .parent_data = &mclk_pll_dco_parent, + .num_parents = 1, + }, +}; + +static struct clk_regmap mclk_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_MPLL_CTRL0, + .shift = 12, + .width = 3, + .table = c3_mpll_od_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "mclk_pll", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &mclk_pll_dco.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap mclk_pll_clk = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_MPLL_CTRL4, + .shift = 16, + .width = 5, + .flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + }, + .hw.init = &(struct clk_init_data){ + .name = "mclk_pll_clk", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &mclk_pll.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data mclk_parent[] = { + { .hw = &mclk_pll_clk.hw }, + { .fw_name = "mclk_pll_in" }, + { .hw = &fclk_div40.hw } +}; + +static struct clk_regmap mclk0_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = ANACTRL_MPLL_CTRL4, + .mask = 0x3, + .shift = 4, + }, + .hw.init = &(struct clk_init_data){ + .name = "mclk0_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = mclk_parent, + .num_parents = ARRAY_SIZE(mclk_parent), + }, +}; + +static struct clk_regmap mclk0_sel_out = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL4, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "mclk0_sel_out", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &mclk0_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap mclk0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_MPLL_CTRL4, + .shift = 2, + .width = 1, + }, + .hw.init = &(struct clk_init_data){ + .name = "mclk0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &mclk0_sel_out.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap mclk0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL4, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "mclk0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &mclk0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap mclk1_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = ANACTRL_MPLL_CTRL4, + .mask = 0x3, + .shift = 12, + }, + .hw.init = &(struct clk_init_data){ + .name = "mclk1_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = mclk_parent, + .num_parents = ARRAY_SIZE(mclk_parent), + }, +}; + +static struct clk_regmap mclk1_sel_out = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL4, + .bit_idx = 9, + }, + .hw.init = &(struct clk_init_data) { + .name = "mclk1_sel_out", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &mclk1_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap mclk1_div = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_MPLL_CTRL4, + .shift = 10, + .width = 1, + }, + .hw.init = &(struct clk_init_data){ + .name = "mclk1_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &mclk1_sel_out.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap mclk1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL4, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "mclk1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &mclk1_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_hw *c3_pll_hw_clks[] = { + [CLKID_FIXED_PLL_DCO] = &fixed_pll_dco.hw, + [CLKID_FIXED_PLL] = &fixed_pll.hw, + [CLKID_FCLK_DIV40_DIV] = &fclk_div40_div.hw, + [CLKID_FCLK_DIV40] = &fclk_div40.hw, + [CLKID_FCLK_DIV2_DIV] = &fclk_div2_div.hw, + [CLKID_FCLK_DIV2] = &fclk_div2.hw, + [CLKID_FCLK_DIV2P5_DIV] = &fclk_div2p5_div.hw, + [CLKID_FCLK_DIV2P5] = &fclk_div2p5.hw, + [CLKID_FCLK_DIV3_DIV] = &fclk_div3_div.hw, + [CLKID_FCLK_DIV3] = &fclk_div3.hw, + [CLKID_FCLK_DIV4_DIV] = &fclk_div4_div.hw, + [CLKID_FCLK_DIV4] = &fclk_div4.hw, + [CLKID_FCLK_DIV5_DIV] = &fclk_div5_div.hw, + [CLKID_FCLK_DIV5] = &fclk_div5.hw, + [CLKID_FCLK_DIV7_DIV] = &fclk_div7_div.hw, + [CLKID_FCLK_DIV7] = &fclk_div7.hw, + [CLKID_GP0_PLL_DCO] = &gp0_pll_dco.hw, + [CLKID_GP0_PLL] = &gp0_pll.hw, + [CLKID_HIFI_PLL_DCO] = &hifi_pll_dco.hw, + [CLKID_HIFI_PLL] = &hifi_pll.hw, + [CLKID_MCLK_PLL_DCO] = &mclk_pll_dco.hw, + [CLKID_MCLK_PLL] = &mclk_pll.hw, + [CLKID_MCLK_PLL_CLK] = &mclk_pll_clk.hw, + [CLKID_MCLK0_SEL] = &mclk0_sel.hw, + [CLKID_MCLK0_SEL_OUT] = &mclk0_sel_out.hw, + [CLKID_MCLK0_DIV] = &mclk0_div.hw, + [CLKID_MCLK0] = &mclk0.hw, + [CLKID_MCLK1_SEL] = &mclk1_sel.hw, + [CLKID_MCLK1_SEL_OUT] = &mclk1_sel_out.hw, + [CLKID_MCLK1_DIV] = &mclk1_div.hw, + [CLKID_MCLK1] = &mclk1.hw +}; + +/* Convenience table to populate regmap in .probe */ +static struct clk_regmap *const c3_pll_clk_regmaps[] = { + &fixed_pll_dco, + &fixed_pll, + &fclk_div40, + &fclk_div2, + &fclk_div2p5, + &fclk_div3, + &fclk_div4, + &fclk_div5, + &fclk_div7, + &gp0_pll_dco, + &gp0_pll, + &hifi_pll_dco, + &hifi_pll, + &mclk_pll_dco, + &mclk_pll, + &mclk_pll_clk, + &mclk0_sel, + &mclk0_sel_out, + &mclk0_div, + &mclk0, + &mclk1_sel, + &mclk1_sel_out, + &mclk1_div, + &mclk1, +}; + +static struct regmap_config clkc_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static struct meson_clk_hw_data c3_pll_clks = { + .hws = c3_pll_hw_clks, + .num = ARRAY_SIZE(c3_pll_hw_clks), +}; + +static int aml_c3_pll_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *regmap; + void __iomem *base; + int clkid, ret, i; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(c3_pll_clk_regmaps); i++) + c3_pll_clk_regmaps[i]->map = regmap; + + for (clkid = 0; clkid < c3_pll_clks.num; clkid++) { + /* array might be sparse */ + if (!c3_pll_clks.hws[clkid]) + continue; + + ret = devm_clk_hw_register(dev, c3_pll_clks.hws[clkid]); + if (ret) { + dev_err(dev, "Clock registration failed\n"); + return ret; + } + } + + return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get, + &c3_pll_clks); +} + +static const struct of_device_id c3_pll_clkc_match_table[] = { + { + .compatible = "amlogic,c3-pll-clkc", + }, + {} +}; +MODULE_DEVICE_TABLE(of, c3_pll_clkc_match_table); + +static struct platform_driver c3_pll_driver = { + .probe = aml_c3_pll_probe, + .driver = { + .name = "c3-pll-clkc", + .of_match_table = c3_pll_clkc_match_table, + }, +}; + +module_platform_driver(c3_pll_driver); +MODULE_AUTHOR("Chuan Liu "); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/meson/c3-pll.h b/drivers/clk/meson/c3-pll.h new file mode 100644 index 000000000000..92a08196a46f --- /dev/null +++ b/drivers/clk/meson/c3-pll.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ +/* + * Copyright (c) 2023 Amlogic, inc. + * Author: Chuan Liu + */ + +#ifndef __AML_C3_PLL_H__ +#define __AML_C3_PLL_H__ + +#define ANACTRL_FIXPLL_CTRL0 0x0040 +#define ANACTRL_FIXPLL_CTRL4 0x0050 +#define ANACTRL_GP0PLL_CTRL0 0x0080 +#define ANACTRL_GP0PLL_CTRL1 0x0084 +#define ANACTRL_GP0PLL_CTRL2 0x0088 +#define ANACTRL_GP0PLL_CTRL3 0x008c +#define ANACTRL_GP0PLL_CTRL4 0x0090 +#define ANACTRL_GP0PLL_CTRL5 0x0094 +#define ANACTRL_GP0PLL_CTRL6 0x0098 +#define ANACTRL_GP0PLL_STS 0x009c +#define ANACTRL_HIFIPLL_CTRL0 0x0100 +#define ANACTRL_HIFIPLL_CTRL1 0x0104 +#define ANACTRL_HIFIPLL_CTRL2 0x0108 +#define ANACTRL_HIFIPLL_CTRL3 0x010c +#define ANACTRL_HIFIPLL_CTRL4 0x0110 +#define ANACTRL_HIFIPLL_CTRL5 0x0114 +#define ANACTRL_HIFIPLL_CTRL6 0x0118 +#define ANACTRL_HIFIPLL_STS 0x011c +#define ANACTRL_MPLL_CTRL0 0x0180 +#define ANACTRL_MPLL_CTRL1 0x0184 +#define ANACTRL_MPLL_CTRL2 0x0188 +#define ANACTRL_MPLL_CTRL3 0x018c +#define ANACTRL_MPLL_CTRL4 0x0190 +#define ANACTRL_MPLL_STS 0x01a4 + +#endif /* __AML_C3_PLL_H__ */ -- 2.37.1