Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:3 as permitted sender) client-ip=2620:137:e000::3:3;
Date:   Tue, 10 Oct 2023 16:57:12 +0100
From:   Jonathan Cameron <jic23@kernel.org>
To:     David Lechner <dlechner@baylibre.com>
Cc:     linux-iio@vger.kernel.org, linux-staging@lists.linux.dev,
        Michael Hennerich <Michael.Hennerich@analog.com>,
        Nuno =?UTF-8?B?U8Oh?= <nuno.sa@analog.com>,
        Axel Haslam <ahaslam@baylibre.com>,
        Philip Molloy <pmolloy@baylibre.com>,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 11/17] staging: iio: resolver: ad2s1210: rename DOS
 reset min/max attrs
Message-ID: <20231010165712.5584d4c1@jic23-huawei>
In-Reply-To: <20231005-ad2s1210-mainline-v4-11-ec00746840fc@baylibre.com>
References: <20231005-ad2s1210-mainline-v4-0-ec00746840fc@baylibre.com>
        <20231005-ad2s1210-mainline-v4-11-ec00746840fc@baylibre.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Precedence: bulk

On Thu,  5 Oct 2023 19:50:28 -0500
David Lechner <dlechner@baylibre.com> wrote:

> The AD2S1210 has a programmable threshold for the degradation of signal
> (DOS) mismatch fault. This fault is triggered when the difference in
> amplitude between the sine and cosine inputs exceeds the threshold.
> 
> The DOS reset min/max registers on the chip provide initial values
> for internal tracking of the min/max of the monitor signal after the
> fault register is cleared.
> 
> This patch converts the custom device DOS reset min/max threshold
> attributes custom event attributes on the monitor signal channel.
> 
> The attributes now use millivolts instead of the raw register value in
> accordance with the IIO ABI.
> 
> Signed-off-by: David Lechner <dlechner@baylibre.com>
Applied.