Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.37 as permitted sender) client-ip=23.128.96.37;
From:   Benjamin Gaignard <benjamin.gaignard@collabora.com>
To:     mchehab@kernel.org, tfiga@chromium.org, m.szyprowski@samsung.com,
        ming.qian@nxp.com, ezequiel@vanguardiasur.com.ar,
        p.zabel@pengutronix.de, gregkh@linuxfoundation.org,
        hverkuil-cisco@xs4all.nl, nicolas.dufresne@collabora.com
Cc:     linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-mediatek@lists.infradead.org, linux-arm-msm@vger.kernel.org,
        linux-rockchip@lists.infradead.org, linux-staging@lists.linux.dev,
        kernel@collabora.com,
        Benjamin Gaignard <benjamin.gaignard@collabora.com>,
        Antti Palosaari <crope@iki.fi>
Subject: [PATCH v11 20/56] media: dvb-frontends: rtl2832_srd: Use queue min_buffers_needed field
Date:   Thu, 12 Oct 2023 13:46:06 +0200
Message-Id: <20231012114642.19040-21-benjamin.gaignard@collabora.com>
In-Reply-To: <20231012114642.19040-1-benjamin.gaignard@collabora.com>
References: <20231012114642.19040-1-benjamin.gaignard@collabora.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

queue_setup checks for a minimum number of buffers so use queue
min_buffers_needed field and remove the check done in
rtl2832_sdr_queue_setup().

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
CC: Antti Palosaari <crope@iki.fi>
---
 drivers/media/dvb-frontends/rtl2832_sdr.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/media/dvb-frontends/rtl2832_sdr.c b/drivers/media/dvb-frontends/rtl2832_sdr.c
index 02c619e51641..597b1548ed8b 100644
--- a/drivers/media/dvb-frontends/rtl2832_sdr.c
+++ b/drivers/media/dvb-frontends/rtl2832_sdr.c
@@ -440,14 +440,9 @@ static int rtl2832_sdr_queue_setup(struct vb2_queue *vq,
 	struct rtl2832_sdr_dev *dev = vb2_get_drv_priv(vq);
 	struct platform_device *pdev = dev->pdev;
 
-	dev_dbg(&pdev->dev, "nbuffers=%d\n", *nbuffers);
-
-	/* Need at least 8 buffers */
-	if (vq->num_buffers + *nbuffers < 8)
-		*nbuffers = 8 - vq->num_buffers;
 	*nplanes = 1;
 	sizes[0] = PAGE_ALIGN(dev->buffersize);
-	dev_dbg(&pdev->dev, "nbuffers=%d sizes[0]=%d\n", *nbuffers, sizes[0]);
+	dev_dbg(&pdev->dev, "nbuffers=%d sizes[0]=%d\n", vb2_get_num_buffers(vq), sizes[0]);
 	return 0;
 }
 
@@ -1364,6 +1359,8 @@ static int rtl2832_sdr_probe(struct platform_device *pdev)
 	dev->vb_queue.ops = &rtl2832_sdr_vb2_ops;
 	dev->vb_queue.mem_ops = &vb2_vmalloc_memops;
 	dev->vb_queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	/* Need at least 8 buffers */
+	dev->vb_queue.min_buffers_needed = 8;
 	ret = vb2_queue_init(&dev->vb_queue);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not initialize vb2 queue\n");
-- 
2.39.2